Evil's STYLE EV1..... (Pic Overload)
-
Wowzers!

-
First off great work
I always enjoy see your craftsmanship. What I love most is how you waste no space at all and use every inch a tool to get the most from it. Very nice 
-
I feel so... unprepared to even start, when I look at your work. How many hours do you have in that? And what are you doing where you use an awl a lot? And the zytel insert makes this mod, in many ways. The entire upgrade is amazing, but by being able to use flat bits, in a smaller tool... HUZZAH! HUZZAH! HUZZAH! This may be the perfect keychain/ultralight EDC scissors based tool.
The only thing I can see possible left to do with it is to take the gaurds off the side of the file face, so it can be used on things bigger than it is.
-
@ducttapetech said:
As always, great stuff Evil!Thank you, Nate.....
Thank you, enki

@NKlamerus said:
Evil is over here making dreams come true and Leatherman came out with the Signal........
Will they ever catch on?
Great job Evil, awesome as always.Thank you, NKlamerus. I honestly never even gave the signal a look until just the other day. Truth be told, I've had little to no interest in any of their lineup since the time I left here over five years ago, about the time the MUT was being released. Thankfully, I have been blessed with a skillset with which I can modify tools tools to suit my needs perfectly.....
@Sparky415 said:

Always good to see your new work Evil one
Thank you, Sparky.....

@Zed said:
Ive never been interested in the style,Till now
amazing work as always Evil 
In the beginning, I was interested in the "idea" of the style, however, for me, the plastic scale never sat well with me and I knew I would never EDC as is. When it got misplaced for years, I really didn't miss it. When I found it again, I wanted to come full circle and modify it to my needs. As it turns out, I use it far more than I ever anticipated and it has really grown on me and is now part of my EDC.....
@SAK Guy said:
:ahhh :ahhh :ahhh :ahhh :ahhh
:ahhh :ahhh :ahhh :ahhh :ahhh:ahhh is a good thing, right? lol

Thank you, Kampfer. I try..... >:D

@50ft-trad said:
Evil, no disrepect you your craftsmanship, but I'm a firm believer that all Skeletools's should be melted down to make something useful instead >:D (I think I'm allergic to them, they bring me out in tantrums :P)
As to the Style EV1..... SUPERB!!!
Love the awl. I hate LM's standard awl as they don't have a slow enough taper.
Love the scribe - very clever! Not something I have frequent use for, but when I do I generally have to bodge one from a twist drill ::)
Love the cunning wire strippers. Did you have to replace the pivot, or did they open wide enough to work on when you removed them from the handles?
Love the zytel bit driver. That should be as standard on the CS and PS
Great work as always, feller
always a pleasure to see what you've been working onThank you, 50ft
No disrespect taken. Skeletools definitely aren't for everyone, that's for sure. It took quite a bit of modification of mine to become a tool useful enough that I would carry it on a regular basis.
I never liked Leatherman awls either for the very same reason. Also, for me, the sewing eye is utterly useless. That is unless I were sewing something like a sail with shoestrings, lol. I actually have another new tool to post that addresses this, however, I simply haven't had the time to take photos and write up a post yet.....
I use a scribe quite often. I have made makeshift scribes for times than I can count over the years.....
Once the scissors are removed they can open wide enough to do the modification.....
The bit driver is getting more and more use as time goes by. It fills a niche, working ideally for my flat sided, precision screwdriver bits far better than a larger, heavier tool would....@rdub934 said:
Dear Leatherman,
You're doing it wrong. Hire Evil510, he can show you how to do it right.
Sincerely,
MTOThank you for the praise, rdub934
Doing things "right" is very subjective and not always profitable, which is what matters to them. Leatherman is here, they always have been. In the background, in the shadows. It's all a numbers game, I feel.....@50ft-trad said:
:D:D
Thank you, Steve.....

@sawman said:
Mr. Evil,
You're a G.D. GENIUS!!!!
FANTASTIC work, Sir
Thank you, sawman.....

@WWW said:
Not impressed at all!!! That is just what I expected from you sir, I would be shocked if the results were inferior to this. Your work serves as inspiration to us (I think I speak for most here) and shows how far we can go with a bit of creativity.
Very well said, as well. Fancy steels are nothing without a good heat treatment and proper geometry. And the nail nick issue can indeed be resolved by changing the geometry of the tang, the awl is the stiffest of the tools on my P4 due to a very squarish tang.
Thank you one more time!Thank you, WWW. Certain projects, such as this one, become a labor of love. I put a lot of thought, time and effort into my work. I truly am a firm believer in proper heat treating. When I first connected with my third generation heat treater, he demonstrated to me the difference a proper heat treat makes by doing hardness and sharpness tests on pieces of metal all from the same batch but at different stages of treatment. The differences were like night and day. A real eye opener. As for the tang geometry, when time permits, I actually plan to go through my collection of older tools and address this issue.....
Thank you, tommywp.....

@Demel said:
First off great work
I always enjoy see your craftsmanship. What I love most is how you waste no space at all and use every inch a tool to get the most from it. Very nice 
Thank you, Demel. Making use of unultilized space is a philosophy that I try to integrate into all of my tools.....

@ironraven said:
I feel so... unprepared to even start, when I look at your work. How many hours do you have in that? And what are you doing where you use an awl a lot? And the zytel insert makes this mod, in many ways. The entire upgrade is amazing, but by being able to use flat bits, in a smaller tool... HUZZAH! HUZZAH! HUZZAH! This may be the perfect keychain/ultralight EDC scissors based tool.
The only thing I can see possible left to do with it is to take the gaurds off the side of the file face, so it can be used on things bigger than it is.Thank you, ironraven. This project has many hours in it. How many I could not tell you as I only worked on it an hour here, two hours there, skipped days or even weeks, etc. I do a lot of fabrication with plastic sheets and light gauge metal. I use a nibbler a lot, which needs a starter hole to get going. With an awl, I can make a clean starter hole in no time flat. I also use my awls to make holes for bolts/screws, scribing on plastic and wood to mark cut lines. Awls really are one of my most frequently used tools. This is actually my go to tool now for the times when I need to use the Leatherman type, precision screwdriver bits that I made years ago. While they fit perfectly in all of my other tools, Wave, Surge, etc., the weight of them made it difficult to do precision work. Hope that made sense. As for the removing the guards on the file. If you are referring to something like what I did with my Micra, I actually already did it to the file on this tool, only it was done after these photos were taken. I have been testing this tool for the past month. I held off on doing so at first because if you look where the nailnick is located, removing the guard in turn makes the nailnick more shallow. I needed to make sure there were no deployment issues. About two weeks in, I decided to go ahead and do the mod. If I get the time, I can post additional pics later....;.
-
AH! You were the one who showed us the file mod first then- my memory is slipping.
-
@ironraven said:
AH! You were the one who showed us the file mod first then- my memory is slipping.

Since posting the posting of this new tool, I've received inquiries about the precision bits that I've made.....
1.0mm, 1.5mm, 2.0mm flat head drivers
#00, #000, #0000 phillip head drivers


-
Kind of off topic, but I've also wondered this....what do you edc? The skeletool, the style? Any others? I'm sure it varies but what is consistent in your carry?
-
Whoa, this thread is amazing.
-
@evil510 said:
Sincepostingthe posting of this new tool, I've received inquiries about the precision bits that I've made.....
1.0mm, 1.5mm, 2.0mm flat head drivers
#00, #000, #0000 phillip head driversI realized a little too late how that made no sense, lol.
@Demel said:
Kind of off topic, but I've also wondered this....what do you edc? The skeletool, the style? Any others? I'm sure it varies but what is consistent in your carry?Simple question. Somewhat complex answer. I'll try and make this brief. First off, I always have a "manbag", if you will. I carry quite a few things but will only mention tool related items here. My Altoids tin, I could write a long detailed post on this alone, perhaps in time. My first essential tool is my Crunch, modified with a flat jaw needlenose, scissors and glass breaker. This tool has often stepped up and saved the day many times. My Urban Driver is also always kept in my bag. While I initially created it as a matching companion for my Urban Trekker, my Crunch can utilize it as well. An olight i3s OES, modified with SS bezel and rear magnet. This sees daily use. An adjustable nylon strap I made with which to convert the i3s into a headlamp. I will sometimes carry an additional full sized multool in this pocket. I have a pocket dedicated for longer objects like pens. Items always in this pocket: An olight o'pen. Modified with a wicked tactical spike. I keep long shelf life lithiums in this one so it will be ready when called upon. This one pretty much sits as a back up. A tube I made containing two spare aaa's. A uni-jetsteam 5 in 1 multipen, modified, of course. I modified it to use .3mm lead instead of .5mm. I also swapped out green and installed purple instead. Made custom colored inserts for the colors. Stainless steel spiked end cap. I also carry one of a series of pens that I have made, all of which utilize a touch sensitive stylus (s-pen) specifically for samsung galaxy phones/tablets. These all have tactical spikes. I rotate which I carry. My Mini Pen Stitcher is always in this pocket as well. I will sometimes carry a secondary small multitool or knife in this pocket. On the strap of my bag, front side, right above armpit level, I added a carabiner. This is where I hang my keys and now Style EV1. Very easy access.....
On my person I keep it simple most days. Knife on my right, tool on my left. I rotate which knife I'll carry for the day based on known activities, occasions, etc. The exception is Project Skeletool. With the blade I created for it, I pretty much consider it more of a knife and will carry it on my right. On a light day, on my left, my Pocketknife Project is carried. Minus pliers, it is a true workhorse. On a medium day, my modified Wave. If it is a day I know I'll actually have to use a tool, my modified Surge. Although, as of late, my all around go to tool has been Shear Evil. I am still working out final details and putting it through the paces right now before I consider it complete. Most would consider the SOG Blacktip a monstrosity of a multitool measuring in at 8 inches when open. In comparison, Shear Evil is 8.5 inches! Shear Evil will negate having to carry some of my other tools. Once my Urban Trekker is done, it too will be a consistent tool that I EDC.....
My EDC is a bit more complex and detailed, but, you get the idea. I hope this helps..... ;)
Thank you, Megan.....
-
Was thinking that you should post a pic of your edc and tools, lights, pens and knives that you rotate, but I think a pic with that magnitude of EPIC in it would melt our brains, burn our eyes and fry our computers.
That's us mobile.
Nate -
@ducttapetech said:
Was thinking that you should post a pic of your edc and tools, lights, pens and knives that you rotate, but I think a pic with that magnitude of EPIC in it would melt our brains, burn our eyes and fry our computers.That's us mobile.
NateWhile I don't have any photos of my EDC rotations in a group photo, I do however have photos of most of them separately. I actually had planned on posting some of them, however, I just haven't gotten around to doing so. There are actually a lot of other things that I've made that I've never made any mention of, from wicked jewelry, custom phone cases and various types of gadgets. Truth be told, I modify just about anything and everything in my life, lol. My busiest time of the year is now over, so maybe I can try and find the time to post on some things.....
-
Top notch craftsmanship as always.
-
I love your threads but I think this one may be my favorite so far!
As always, thanks for sharing and inspiring us!
-
Thank you, ineedone.....
@82brutus said:
I love your threads but I think this one may be my favorite so far!
As always, thanks for sharing and inspiring us!Thank you, 82brutus.....
Whoa, this thread is amazing.
+1

Top notch craftsmanship as always.
+1 on this too!

Thank you all for your comments. They are very much appreciated.....
-
Evil, I just want to say that with talent like yours, I hope you're doing very well in life. You deserve nothing but the best buddy

-
@sawman said:
Evil, I just want to say that with talent like yours, I hope you're doing very well in life. You deserve nothing but the best buddy
Hey there, buddy. Thank you for the kind words. Life could be better, that's for sure, but am thankful for the things that I have been blessed with. All the best to you as well and thank you for following my work from day one all those years ago.....

-
Amazing stuff
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login