Böker City Tool 3 - thoughts after 3 weeks of use
-
While the 3 looks expensive compared to a SAK, the 1 looks like good value compared to something like a Case sodbuster, with which it closely compares.
Sanrenmu start to offer the knives under their own brand name,
so you wait a little until the three layer knives are available.It is very tempting to get one of those!
Its cheaper than the boker city 1 too. Atleast to get here. -
While the 3 looks expensive compared to a SAK, the 1 looks like good value compared to something like a Case sodbuster, with which it closely compares.
Sanrenmu start to offer the knives under their own brand name,
so you wait a little until the three layer knives are available.Pretty close... it looks like the scales are flat whereas in the Böker version has round scales (also, you cannot reverse the clip).
The flat sides of the blade look duller/unfinished.This might be exactly the same knife, however, they put together the unfinished parts.
Could also mean that parts were used that were sorted out by QC -
I doubt that SRM will put their name on inferior products.
I do not recall any case where they had such issues, but there have been incidents with products branded as SRM, whilst not really being made by them, copies..
(The "official site", was not really the official site and so on, - discussion from a few years ago)
-
While the 3 looks expensive compared to a SAK, the 1 looks like good value compared to something like a Case sodbuster, with which it closely compares.
Sanrenmu start to offer the knives under their own brand name,
so you wait a little until the three layer knives are available.Pretty close... it looks like the scales are flat whereas in the Böker version has round scales (also, you cannot reverse the clip).
The flat sides of the blade look duller/unfinished.This might be exactly the same knife, however, they put together the unfinished parts.
Could also mean that parts were used that were sorted out by QCMay be, but all the Sanrenmu knives I owend were well made. So perhabs they
only save some finishing steps to reduce the production costs. If the one I
ordered will arrive I will see :D -
Am I hypocritical for being more interested in this knife since it's called Sanrenmu than when it was Boker?...

-
While the 3 looks expensive compared to a SAK, the 1 looks like good value compared to something like a Case sodbuster, with which it closely compares.
Sanrenmu start to offer the knives under their own brand name,
so you wait a little until the three layer knives are available.Pretty close... it looks like the scales are flat whereas in the Böker version has round scales (also, you cannot reverse the clip).
The flat sides of the blade look duller/unfinished.This might be exactly the same knife, however, they put together the unfinished parts.
Could also mean that parts were used that were sorted out by QCMay be, but all the Sanrenmu knives I owend were well made. So perhabs they
only save some finishing steps to reduce the production costs. If the one I
ordered will arrive I will see :DQuite possible, but would have to forward it to me for testing.
Just going off the pictures I would choose the Böker version every time. The price difference is not that big (in absolutes, maybe 20$) and the rounded scales are awesome.
-
@50ft-trad said:
Sounds like it does need some work to get the best from it, with tweaking the scissors and ergonomics. With that in mind, I might as well just overhaul a Juice to get that running smooth, at least that way I get pliers and a proper Phillips :D Excellent concept, shame the execution isn't quite up to par
Many thanks for the insight

I have no inside on the Juice (yet
).
But I think Böker is really close. The scissors are really good when cutting heavy stuff. Depending on your needs they might be great for you. Once they put something better in place of that wretched serrated blade they will have a winner.City Tool 3 vs. Climber
Blade
:
City Tool 3Scissors
:
ClimberLarge flat
:
not enough data, call it a drawsmall flat
:
ClimberT&T
:
ClimberScales
:
City Tool 3But not all of this is equal, if you use the Blade 95% of the time and the rest is cutting zip-ties and cable with the scissor, I would call the City Tool the winner. If you mostly open cans and cut cloth-labels of after a shopping spree you should get a Climber.
There's a parcel on the way to you today mate ;)
I'm still very much in mixed minds about this tool. At first I thought the odd serrated blade and driver combo could be quite useful, but now I'm not so sure. I love the shape of the blade, and the overall look of the knife and clip, though I wish that glass breaker was easily removed. Cap lifter and awl look perfectly fine, as does the corkscrew - shame about the lanyard loop screwing up the ergonomics. The scissors sound fixable for lighter work, but am unconvinced overall that the price is worth the money (to me) with the various little niggles.
The absence of a Phillips is no biggie for me, as I'd just ensure that whatever pliers tool I paired it up with covered that. The looks of the city version do appeal I must admit. I suspect I'll end up trying one at some point, but it's not tempting me enough to get one with any urgency....
-
@50ft-trad said:
There's a parcel on the way to you today mate ;)I'm still very much in mixed minds about this tool. At first I thought the odd serrated blade and driver combo could be quite useful, but now I'm not so sure. I love the shape of the blade, and the overall look of the knife and clip, though I wish that glass breaker was easily removed. Cap lifter and awl look perfectly fine, as does the corkscrew - shame about the lanyard loop screwing up the ergonomics. The scissors sound fixable for lighter work, but am unconvinced overall that the price is worth the money (to me) with the various little niggles.
The absence of a Phillips is no biggie for me, as I'd just ensure that whatever pliers tool I paired it up with covered that. The looks of the city version do appeal I must admit. I suspect I'll end up trying one at some point, but it's not tempting me enough to get one with any urgency....
I too am very intrigued by the knife. I love the look of it and that it's something fresh in the multitool knife arena, but I am not digging Chinese craftsmanship. Looks like there's a couple of week points and shoddy scissors. If they made them better quality or the reviews improve it could be a winner.
But obviously they ripped off a couple Victorinox tools like the saw and cap lifter 100%. Why not just copy the scissors too? :) I guess it's nice to see some decent innovation in this market though. I really like the idea of the number 2 with a decen serrated blade plus driver.
-
-
Scissors are easy to get right, but time consuming. It's not a difficult process to adjust a peened pivot or crink and sharpen to get a good cutting action when you understand the mechanics (I've done it on dedicated scissors a few times), but from a mass production perspective, it must be a smurfing nightmare! It must be easier to get every other tool on a multitool or multipurpose knife right than it is with scissors on a mass production basis. All credit to those that get it right.
-
@50ft-trad said:
Scissors are easy to get right, but time consuming. It's not a difficult process to adjust a peened pivot or crink and sharpen to get a good cutting action when you understand the mechanics (I've done it on dedicated scissors a few times), but from a mass production perspective, it must be a smurfing nightmare! It must be easier to get every other tool on a multitool or multipurpose knife right than it is with scissors on a mass production basis. All credit to those that get it right.Does that mean if I send you one you would adjust the scissors for me and send it back :D

-
@50ft-trad said:
Scissors are easy to get right, but time consuming. It's not a difficult process to adjust a peened pivot or crink and sharpen to get a good cutting action when you understand the mechanics (I've done it on dedicated scissors a few times), but from a mass production perspective, it must be a smurfing nightmare! It must be easier to get every other tool on a multitool or multipurpose knife right than it is with scissors on a mass production basis. All credit to those that get it right.
Does that mean if I send you one you would adjust the scissors for me and send it back :D

I could certainly have a try for you....
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
