firearms
-
Great ammo storage!
Just a thought. If you have ammo you are planning on storing for long periods of time then I would suggest a ammo can and possibly desiccant.
-
Got plenty of anti-humidity absorbents in the room. I have a large one that you can plug in to recharge for the room, and plenty of smaller disposable packets everywhere.
-
@Chako said:
Got plenty of anti-humidity absorbents in the room. I have a large one that you can plug in to recharge for the room, and plenty of smaller disposable packets everywhere.That's good.

Again, if you plan on buying any ammo for long term storage I would still highly suggest a ammo can with seal.
-
I bought another Mauser.
Got it from a buddy whose already holding my guns, it's been shifted to my safe in his basement. M91 Argentine rifle, 7.65 Mauser. Lovely rifle. 
-
Can't wait to see photos of it.
Top to bottom: Traditions .50 cal Deerhunter percussion sidelock, Thompson Center .50 cal New Englander percussion sidelock, Thompson Center .50 cal Impact inline.
All I need is to get myself some #11 percussion caps, lead balls or conical bullets, patches, and the right black powder and I should be in business. :D
-
Cool thing about muzzle loaders here is no need to buy through a FFL. Cash and carry. Used to be cash and carry for rifles 50+ years old as well, but that stopped this year.
-
-
Ok...looks like my luck keeps on rolling.

I took a closer look at that New Englander and noticed after looking closely at the ram rod down the barrel that it was longer then it should be. I examined the barrel closely with a bore light and just can see a lead ball down the barrel!
The local gun shop sold me a loaded muzzleloader! Now how in the hell am I supposed to get that out? Well I took a look online and it appears there are 3 main ways of doing this. First is to use a CO2 canister to somehow push the ball and I guess powder out of the barrel. Second is to try and fire it. Third is to use a ball puller.
I don't have a puller yet...but it looks like I should buy one ASAP anyhow. Guess I will call the gun shop and see what they are willing to do for me lol. I just called a local gun smith and he tells me he can remove it for me. Firing this is not an option as I have no clue if there is power, or how much was put in.
For Pete's sake, does the gun shop not know what they are doing? I just like the idea of driving around with a freaking smoke pole loaded.


-
@HarleyXJGuy said:
This is in case you guys wondered what 60,000 dollars of expanded .50 BMG looked like.Mere peanuts.
The M829E4 is a fifth-generation APFSDS-T cartridge consisting of a depleted-uranium, multi-segmented,[not in citation given] long rod penetrator with a three-petal composite sabot.[citation needed] The penetrator includes a low-drag fin with a tracer, and a windshield and tip assembly. Its propellant maintains consistent muzzle velocities across operational temperatures from −25 to 145 °F (−32 to 63 °C). The new Advanced Combustible Cartridge Case is similar to previous models but has a relocated skive joint placement for better crew-member safety during handling.[9] The initial order for 2,501 M829E4 rounds in 2014 had a unit cost of $10,100 each.[5] On 20 July 2015, Orbital ATK announced that the M829E4 had passed First Article Acceptance Testing and was entering production.[10] On 12 October 2015, Orbital ATK announced the round had recently received type classification as the M829A4, and was awarded a full-rate production contract to begin in early 2016.[11]

-
@Chako said:
Ok...looks like my luck keeps on rolling.
I took a closer look at that New Englander and noticed after looking closely at the ram rod down the barrel that it was longer then it should be. I examined the barrel closely with a bore light and just can see a lead ball down the barrel!
The local gun shop sold me a loaded muzzleloader! Now how in the hell am I supposed to get that out? Well I took a look online and it appears there are 3 main ways of doing this. First is to use a CO2 canister to somehow push the ball and I guess powder out of the barrel. Second is to try and fire it. Third is to use a ball puller.
I don't have a puller yet...but it looks like I should buy one ASAP anyhow. Guess I will call the gun shop and see what they are willing to do for me lol. I just called a local gun smith and he tells me he can remove it for me. Firing this is not an option as I have no clue if there is power, or how much was put in.
For Pete's sake, does the gun shop not know what they are doing? I just like the idea of driving around with a freaking smoke pole loaded.


Did you tell them you mentioned them in your will?
Seriously, you need to find another gun shop, ASAP!
-
I know, however they are too convenient for my own good. The TC New Englander is a beautiful rifle. Now I know why someone sold it to them lol. The original owner probably didn't know how to do it. After doing some reading, getting that lead ball out shouldn't be an issue. My problem is that I do not have the proper gear yet. Going to see what the local gun shop will do for me. If they can't or won't do anything, I have a real good local gun smith who tells me he won't have any problems extricating that ball. Either way, I won't let the local gun shop off the hook...selling me a loaded rifle! Man oh man!

-
This is in case you guys wondered what 60,000 dollars of expanded .50 BMG looked like.
Mere peanuts.
The M829E4 is a fifth-generation APFSDS-T cartridge consisting of a depleted-uranium, multi-segmented,[not in citation given] long rod penetrator with a three-petal composite sabot.[citation needed] The penetrator includes a low-drag fin with a tracer, and a windshield and tip assembly. Its propellant maintains consistent muzzle velocities across operational temperatures from −25 to 145 °F (−32 to 63 °C). The new Advanced Combustible Cartridge Case is similar to previous models but has a relocated skive joint placement for better crew-member safety during handling.[9] The initial order for 2,501 M829E4 rounds in 2014 had a unit cost of $10,100 each.[5] On 20 July 2015, Orbital ATK announced that the M829E4 had passed First Article Acceptance Testing and was entering production.[10] On 12 October 2015, Orbital ATK announced the round had recently received type classification as the M829A4, and was awarded a full-rate production contract to begin in early 2016.[11]
True they don't cost much compared to tank and arty rounds but we sure had fun shooting them.
We also shot a ton of linked 40mm grenades but I have no idea how much they cost.
-
This is in case you guys wondered what 60,000 dollars of expanded .50 BMG looked like.
Mere peanuts.
The M829E4 is a fifth-generation APFSDS-T cartridge consisting of a depleted-uranium, multi-segmented,[not in citation given] long rod penetrator with a three-petal composite sabot.[citation needed] The penetrator includes a low-drag fin with a tracer, and a windshield and tip assembly. Its propellant maintains consistent muzzle velocities across operational temperatures from −25 to 145 °F (−32 to 63 °C). The new Advanced Combustible Cartridge Case is similar to previous models but has a relocated skive joint placement for better crew-member safety during handling.[9] The initial order for 2,501 M829E4 rounds in 2014 had a unit cost of $10,100 each.[5] On 20 July 2015, Orbital ATK announced that the M829E4 had passed First Article Acceptance Testing and was entering production.[10] On 12 October 2015, Orbital ATK announced the round had recently received type classification as the M829A4, and was awarded a full-rate production contract to begin in early 2016.[11]
True they don't cost much compared to tank and arty rounds but we sure had fun shooting them.
We also shot a ton of linked 40mm grenades but I have no idea how much they cost.
Fired the M79 and M203 grenade launchers. Never had a chance to play around with one of the full-auto ones.
-
This is in case you guys wondered what 60,000 dollars of expanded .50 BMG looked like.
Mere peanuts.
The M829E4 is a fifth-generation APFSDS-T cartridge consisting of a depleted-uranium, multi-segmented,[not in citation given] long rod penetrator with a three-petal composite sabot.[citation needed] The penetrator includes a low-drag fin with a tracer, and a windshield and tip assembly. Its propellant maintains consistent muzzle velocities across operational temperatures from −25 to 145 °F (−32 to 63 °C). The new Advanced Combustible Cartridge Case is similar to previous models but has a relocated skive joint placement for better crew-member safety during handling.[9] The initial order for 2,501 M829E4 rounds in 2014 had a unit cost of $10,100 each.[5] On 20 July 2015, Orbital ATK announced that the M829E4 had passed First Article Acceptance Testing and was entering production.[10] On 12 October 2015, Orbital ATK announced the round had recently received type classification as the M829A4, and was awarded a full-rate production contract to begin in early 2016.[11]
True they don't cost much compared to tank and arty rounds but we sure had fun shooting them.
We also shot a ton of linked 40mm grenades but I have no idea how much they cost.
Fired the M79 and M203 grenade launchers. Never had a chance to play around with one of the full-auto ones.
You haven't missed anything. They are jam prone junk.
Of course when you do get one running they are devastating. Just not something you want to rely on in combat.
-
Hey Chako, congrats on breaking 14k..

JR -
M829 vs T-72.
The penetrator went through the berm; then through the tank.

-
Thanks, I hadn't noticed.

-
Ok...looks like my luck keeps on rolling.

I took a closer look at that New Englander and noticed after looking closely at the ram rod down the barrel that it was longer then it should be. I examined the barrel closely with a bore light and just can see a lead ball down the barrel!
The local gun shop sold me a loaded muzzleloader! Now how in the hell am I supposed to get that out? Well I took a look online and it appears there are 3 main ways of doing this. First is to use a CO2 canister to somehow push the ball and I guess powder out of the barrel. Second is to try and fire it. Third is to use a ball puller.
I don't have a puller yet...but it looks like I should buy one ASAP anyhow. Guess I will call the gun shop and see what they are willing to do for me lol. I just called a local gun smith and he tells me he can remove it for me. Firing this is not an option as I have no clue if there is power, or how much was put in.
For Pete's sake, does the gun shop not know what they are doing? I just like the idea of driving around with a freaking smoke pole loaded.


Did you tell them you mentioned them in your will?
Seriously, you need to find another gun shop, ASAP!
+1! You'd wonder how they stay in business if your a typical example of their customer service!
-
I like to think I am special.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



