The Hacked Leatherman Owners Club.
-
Hey everyone I'm pretty new to this forum, but I thought I would share my mod/hacks that I did on my wave. There are only 4 original tools left, the large flathead screwdriver, the can opener/ bottle opener, the saw, and the file. The rest are from a wingman, a kick, a rebar, bought separately or fabricated. The obvious ones are s30v blade, the rebar pliers, and the wingman scissors. From the kick I used the medium flat head, and the 3D Philips. Where the old scissors were, I modified a 32 gig flash drive to fit. I modified a hacksaw blade to fit into the slot for the pocket clip and lanyard, it slides in and out and lock in both positions using the inside tools locking mechanism. I also added a notch in the other slot made for the pocket clip to hold a pair of tweezers from a SAK. The last thing is that I added the pocket clip from the wingman because it left the slot open and because I already had it.
ThanksSent from my iPhone using Tapatalk
What was your source for the hacksaw? Was it a regular hacksaw you hollowed out, or a saw blade that came that way?
Also, wouldn't the weight of the tool damage any USB device you plug that into?
-
That's some magnet!!!!
-
Impressive! :o
-
[emoji43] whoa
Sent from my VS985 4G using Tapatalk
-
I'm in the club :D
I dumped the mini driver & added a rebar awl & pliers head to my ALX. I was never going to use the mini driver, now it has a much better tool load out, for me anyway.
The awl was rubbing the tool handle and pliers stop. So I thinned it down a couple thousandth on each side.
and moved the spacer to the outside of the awl.
-
Welcome to the club Dean.
It looks good.

-
-
-
Does anyone know if the t-shank holder from a Supertool 300 EOD fits in a Wave/Charge? From the outside the Rebar and Supertool seems to have the same pivot size

-
@GPS12 said:
Does anyone know if the t-shank holder from a Supertool 300 EOD fits in a Wave/Charge? From the outside the Rebar and Supertool seems to have the same pivot size
I would ask this guy: Toolslinger's SurCharge + Toolslinger's ST300 XD.
Here are some pics of two ST300 awls, one of which I ground down to fit into a Charge.
I've not seen the ST300 t-shank holder in person so I don't know if it could be worked to fit sorry. -
@GPS12 said:
Does anyone know if the t-shank holder from a Supertool 300 EOD fits in a Wave/Charge? From the outside the Rebar and Supertool seems to have the same pivot size
Afraid it won't work. The amount of material that you'd have to remove would seriously compromise the part by the time you got it to fit.
You'd be better off trying to grind a Surge exchanger to fit on the outside like Metro did way back.
-
Thank you for the reply

-
Does anyone know if the t-shank holder from a Supertool 300 EOD fits in a Wave/Charge? From the outside the Rebar and Supertool seems to have the same pivot size

Afraid it won't work. The amount of material that you'd have to remove would seriously compromise the part by the time you got it to fit.
You'd be better off trying to grind a Surge exchanger to fit on the outside like Metro did way back.
What about making the t-shank liner lock compatible, any chance of that happening?
Does anyone have pics of the t-shank not installed? Pics from both sides if possible thanks.
-
Does anyone know if the t-shank holder from a Supertool 300 EOD fits in a Wave/Charge? From the outside the Rebar and Supertool seems to have the same pivot size

Afraid it won't work. The amount of material that you'd have to remove would seriously compromise the part by the time you got it to fit.
You'd be better off trying to grind a Surge exchanger to fit on the outside like Metro did way back.
What about making the t-shank liner lock compatible, any chance of that happening?
Does anyone have pics of the t-shank not installed? Pics from both sides if possible thanks.
Not sure that the EOD one would be convertible to liner lock. The Surge one has been done by Metro in one of his older hack threads.
Next time I have the XD apart for cleaning/tinkering/maintenance I'll try and get some detailed pics and measurements.
-
@Toolslinger said:
Next time I have the XD apart for cleaning/tinkering/maintenance I'll try and get some detailed pics and measurements.Thank you mate.

-
Thank you too!
-
Just for fun today I polished out the blade on my Rebar.

-
Sweet blade

Sent from my SM-G920R4 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login












