MUT
-
Thanks for the input!
Sent from my VS985 4G using Tapatalk
-
Another non-gun owner here, but very fond of LM MUT.
For me personally it hits the few notes right where it should. I use mine all over, as a general round-the-house-tool as well as something I know I can rely on while outdoor on hikes and MTB rides.
What I like:
- sturdy construction and its XL-size, something many would find as a downside
- pretty much all the tools I currently may need, except maybe scissors but that is taken care of by my small VSA I carry alongside...not great, but does the job when scissors are required.
- what many miss, is its multi-purpose hammer extender. It serves as a hammer, strap cutter, box cutter, basic but sturdy pry bar and scraper as tommywp mentioned above, carabiner and a bottle opener.
- its knife is kick-a$s, the largest and thickest than on any of my multitools.
- its long drivers are simply great, and pleasure to use. Solid, sturdy feel on every turn with lot of torque applied.
- I actually like its Titanium pocket clip, I use it a lot and use it as lanyard attachment point too.
- the fact you can dye the coyote plastic parts into black and make it even more mean Ninja-looking ;)
What I don' t care much about:
- punch tool. For some time I have been playing with an idea of turning this into a removable (screw-in & out) fire-steel
- bronze carbon scraper, I have already done some preliminary measurements and planning to turn it into a nice and long awl...very un-LM-like 8)
Here's mine after some work in the garage:

Few more photos showing Black Ninja black dye treatment on plastic parts:




You'll love it, guaranteed!

-
A very cool tool to have even if u don't own an AR. I have it in my home use rotation and grab it for outside jobs because I can attach it to myself without a sheath and know I can drop it from the roof, etc and it will be just fine.
Unless you are into guns I think paying full price is absurd but if you can find one used for the price of a used Surge then it is fully worth. Don't get me wrong, it will not replace a surge but it's a nice tool to have when you need a change once in a while.
Being a gun owner I bet you will like yours.
-
Now I'm thinking I may have to give this thing a go around the ranch. I'm curious if it can perform heavy duty tasks as well as the ST does....?
Sent from 9 miles from the face of the sun
-
@BASguy said:
Now I'm thinking I may have to give this thing a go around the ranch. I'm curious if it can perform heavy duty tasks as well as the ST does....?Sent from 9 miles from the face of the sun
Sure it can, with the type of tools that match the ST ones, but the MUT lacks quite a few tools ST comes with.
-
G'Day,
I EDC my MUT from time to time. I do like the tool a lot, I think it has a lot of presence.
I used it for a month over December as part of the Skeletool Challenge:
You can read my final comments here: /post/1016941For an EDC it will do just fine, if you are willing to wear the weight. Some have said that for that weight a Surge is better "value", but the MUT is Cooler!!!
You will not be disappointed!!!
Pete
-
What Babola said, his pics are always so great too

The MUT is one of those tools that is too neat not to want to try. I don't have any firearms at all nor getting in the near future. The hammer is what intrigued me and it has not disappointed. The pliers are great as said however I do think for the price a 154CM or better blade would have been a really nice touch. The saw on this tool great but a metal file would be a better choice for me. I've yet to use the punch thing or the carbon scraper. The longer bits are sweet as is the design. I didn't realize the tool has a latch that locks it in the closed position.
All in all I dig this tool even tho I'm not a gun owner. Pair it with a well appointed SAK and all is good.
-
Every time I read MUT I think mutt

-
I have one for my dedicated motorcycle EDC.

-

It's here![emoji3]Sent from my VS985 4G using Tapatalk
-
Congrats.
-
Can't wait to hear your opinion of it after some use.

-
Fairly positive that this is the best multitool ever devised, I have uses for everything and no complaints other than a lack of springy pliers, and I could have shaved with the Blade out of the box. Love the plier jaws, long shank bits, and bronze scraper( great for scraping paint off of steel)
Sent from my VS985 4G using Tapatalk
-
I don't rate it so far.
It's surprisingly easy to wear with the pocketclip, despite its' bulk, but I am struggling to identify with it, and I always feel the space is not used ideally.
(and I have limited use for the punch and scraper - Does anyone have any easy mods for other things that could go there?)

-
@Sea Monster said:
I don't rate it so far.It's surprisingly easy to wear with the pocketclip, despite its' bulk, but I am struggling to identify with it, and I always feel the space is not used ideally.
(and I have limited use for the punch and scraper - Does anyone have any easy mods for other things that could go there?)
Do you have the EOD version? If so, how usable is the pliers?
I really like the MUT, it gets a lot of EDC time in spite of our nanny-state rules...
Pete
-
Has anyone tried putting the Victorinox Cybertool driver in the place of the punch? They seem to be around the same size.
-
Do you have the EOD version? If so, how usable is the pliers?
No, but I've used one, and I found the pliers too awkward - Tossed it and grabbed the wave to finish the job.
-
@Fortytwo said:
Has anyone tried putting the Victorinox Cybertool driver in the place of the punch? They seem to be around the same size.I've always thought it would be cool to remove the punch and the plastic bit that separates the punch and the long bit holder, and then to stack the SAK metal file and scissors and put them in place of the punch. But I'm dubious that the tang on the SAK tools would be big enough. Can anyone compare the SAK tang size and hole diameter to the punch/scrapper?
-
I have recently bought MUT. what a DISSAPOINTMENT. i have a lot of LM tools and it looks like this the last LM i will ever buy. First - you can open it with ease, but it is nearly impossible to fold it back. The screw on the knife blade is smaller than it should be, co it wont overlapse liner lock. Therefore the blade is insecure, just light tap on the table will close it. But it can happen, it might be just one bad Mut. BUT they have changed the pocket clip - it is no more made from Titanium. It is steel with PLASTIC base attached to the body. so definately much less sturdy design. No mention about it nowhere on LM site... :(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login