MUT
-
G'Day,
I EDC my MUT from time to time. I do like the tool a lot, I think it has a lot of presence.
I used it for a month over December as part of the Skeletool Challenge:
You can read my final comments here: /post/1016941For an EDC it will do just fine, if you are willing to wear the weight. Some have said that for that weight a Surge is better "value", but the MUT is Cooler!!!
You will not be disappointed!!!
Pete
-
What Babola said, his pics are always so great too

The MUT is one of those tools that is too neat not to want to try. I don't have any firearms at all nor getting in the near future. The hammer is what intrigued me and it has not disappointed. The pliers are great as said however I do think for the price a 154CM or better blade would have been a really nice touch. The saw on this tool great but a metal file would be a better choice for me. I've yet to use the punch thing or the carbon scraper. The longer bits are sweet as is the design. I didn't realize the tool has a latch that locks it in the closed position.
All in all I dig this tool even tho I'm not a gun owner. Pair it with a well appointed SAK and all is good.
-
Every time I read MUT I think mutt

-
I have one for my dedicated motorcycle EDC.

-

It's here![emoji3]Sent from my VS985 4G using Tapatalk
-
Congrats.
-
Can't wait to hear your opinion of it after some use.

-
Fairly positive that this is the best multitool ever devised, I have uses for everything and no complaints other than a lack of springy pliers, and I could have shaved with the Blade out of the box. Love the plier jaws, long shank bits, and bronze scraper( great for scraping paint off of steel)
Sent from my VS985 4G using Tapatalk
-
I don't rate it so far.
It's surprisingly easy to wear with the pocketclip, despite its' bulk, but I am struggling to identify with it, and I always feel the space is not used ideally.
(and I have limited use for the punch and scraper - Does anyone have any easy mods for other things that could go there?)

-
@Sea Monster said:
I don't rate it so far.It's surprisingly easy to wear with the pocketclip, despite its' bulk, but I am struggling to identify with it, and I always feel the space is not used ideally.
(and I have limited use for the punch and scraper - Does anyone have any easy mods for other things that could go there?)
Do you have the EOD version? If so, how usable is the pliers?
I really like the MUT, it gets a lot of EDC time in spite of our nanny-state rules...
Pete
-
Has anyone tried putting the Victorinox Cybertool driver in the place of the punch? They seem to be around the same size.
-
Do you have the EOD version? If so, how usable is the pliers?
No, but I've used one, and I found the pliers too awkward - Tossed it and grabbed the wave to finish the job.
-
@Fortytwo said:
Has anyone tried putting the Victorinox Cybertool driver in the place of the punch? They seem to be around the same size.I've always thought it would be cool to remove the punch and the plastic bit that separates the punch and the long bit holder, and then to stack the SAK metal file and scissors and put them in place of the punch. But I'm dubious that the tang on the SAK tools would be big enough. Can anyone compare the SAK tang size and hole diameter to the punch/scrapper?
-
I have recently bought MUT. what a DISSAPOINTMENT. i have a lot of LM tools and it looks like this the last LM i will ever buy. First - you can open it with ease, but it is nearly impossible to fold it back. The screw on the knife blade is smaller than it should be, co it wont overlapse liner lock. Therefore the blade is insecure, just light tap on the table will close it. But it can happen, it might be just one bad Mut. BUT they have changed the pocket clip - it is no more made from Titanium. It is steel with PLASTIC base attached to the body. so definately much less sturdy design. No mention about it nowhere on LM site... :(
-
@ventrix said:
I have recently bought MUT. what a DISSAPOINTMENT. i have a lot of LM tools and it looks like this the last LM i will ever buy. First - you can open it with ease, but it is nearly impossible to fold it back. The screw on the knife blade is smaller than it should be, co it wont overlapse liner lock. Therefore the blade is insecure, just light tap on the table will close it. But it can happen, it might be just one bad Mut. BUT they have changed the pocket clip - it is no more made from Titanium. It is steel with PLASTIC base attached to the body. so definately much less sturdy design. No mention about it nowhere on LM site... :(It appears you ended up with a MUT which slipped thru the hit-and-miss LM QC process of recent times, again. >:(
Don't let this unfortunate episode put you off future LM multitool purchases - send it back for replacement or ask for a refund.LM MUT is a fantastic tool, so loaded with multi-tool technological innovations and plethora of design features you won't find on any other MT out there these days, I can guarantee you that. One has to own and use it for some time to discover and 'learn' this tool's capabilities and applications not necessarily obvious to its new owner, straight up.
The pocket clip change is simply one of those unfortunate decisions LM sometimes makes which tend to confuse the MT aficionados and members of collector community alike. It is simply a cheap-a$$ stamped steel plate replica of the original skeletonized clip made of Titanium. Someone on this forum already posted photo of it few weeks back, it's nowhere even close to the original. My guess is this was done simply to keep the production cost down.
They also seem to have replaced the fine-tooth pliers head with the coarse-tooth one. I personally prefer the fine tooth pliers for an odd situation where precision work is required, but that's just me.
As for the 'small screw' on knife blade issue, you lost me a bit there...could it be another design change of late? Care to post a photo or few?
Keep the chin up! ;)
-
I recently set a MUT in to LM for a bit of adjustment, hopefully they just do what needs doing, and I don't get back a newer, dud one.
I'll keep y'all updated, and you might get pics if relevant.
-
G'Day,
Sorry to hear you may have a dud. I had two that were replace under warranty. As babola said, hang in, it is a very good tool once you get it sorted.
As for the clip, my last replacement one also has the cheap clip. "Leatherman, what were you thinking?!!!" You can get the Ti clips on the interweb and reasonable prices. I have a spare one just in-case.
Cheers,
Pete
-
Here are the pics of the liner lock and my "small screw" problem :)
See, what i mean? The guy from LM said, that it is not problem with screw, but it is defect in liner lock.
Well, i dont know, but it seems to me, that the wide part of the screw should overlapse the liner lock, so it will stop. And the screw looks exactly like one on my Surge.. :) "Locked" blade is very insecure for now, i wouldnt stab it into wood for example, because it will close very easy. Just light tap on the table and it fold.. -
It seems like you have a liner lock sticking up too high. That very screw on my MUT does overlap the lock, but the lock does not touch the bottom of the screw once the blade is deployed. That screw on your MUT is indeed small. Mine's diameter is the same as the width of the blade where it holds. Mine is also smooth on the disc surface without grooves/ serrations as yours.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login