Leatherman Signal review
-
Here are a couple more thoughts:
First, the price. I meant to comment on this but forgot. While I do really like the Signal, I don't think it's worth the $100+ price. I'm sure it will go down over time, and I think it should be more in line with the $50 range. I likely would not have gotten it if it wasn't for it being a Christmas splurge, at least until it dropped significantly. I mean when you can get more robust, quality MTs like the Wave, Surge, Spirit, Supertool, etc. for considerably cheaper in most cases, then the Signal should certainly be cheaper.
I had another thought, but lost it
Then I had a different one, so I'll go with it and hope to remember the other later. I'm curious if there are any fans of the Skeletool who don't like the Signal, and I'm curious why. It seems to me like the Signal is a beefed up, slightly more robust Skele in a sense. I wish I had one in hand to fully remember the feel and why I wasn't a fan, as it also seems odd to me that I like the Signal just fine, but wasn't a Skele fan. I know part of it was the bit driver sticking out of the bottom of the handle and how that didn't feel right to me in plier mode. I also didn't like the pliers. I used to have a LM Freestyle, so I had some experience with that plier head type and just didn't like it. The ergonomics weren't great either, and the Skele is basically the same thing with the bit driver and caribiner thing added. -
Great review and sweet pics mate
.@Monrogue said:
Here are a couple more thoughts:... I had another thought, but lost it
Then I had a different one, so I'll go with it and hope to remember the other later. I'm curious if there are any fans of the Skeletool who don't like the Signal, and I'm curious why. It seems to me like the Signal is a beefed up, slightly more robust Skele in a sense. I wish I had one in hand to fully remember the feel and why I wasn't a fan, as it also seems odd to me that I like the Signal just fine, but wasn't a Skele fan. I know part of it was the bit driver sticking out of the bottom of the handle and how that didn't feel right to me in plier mode. I also didn't like the pliers. I used to have a LM Freestyle, so I had some experience with that plier head type and just didn't like it. The ergonomics weren't great either, and the Skele is basically the same thing with the bit driver and caribiner thing added.I own three Skeletools, two regular ones and one CX (the CX is an early one, with the old plier head and serrated knife) and a MUT, and I can only say that, even though they seem to be members of the same family, they don't "feel" the same.
The MUT feels like a real "heavy duty" tool, just like the Surge or the ST300, but the Skeletool feels ... how should I say this ... a bit flimsy. In my opinion, the MUT is a plier based tool, with a OHO knife/saw and bit driver added on, while the Skeletool feels like a OHO knife, with a pair of mini pliers added on. I mean, the Skeletool feels great when I use it as a knife, but when I use the pliers, or the bit driver, it just feels very thin, akward and sometimes even painful.
I think it comes down to this, the Skeletool is great for pocket carrying, I like the pocket clip, and you hardly notice it in your pocket, thanks to its slim appearance, but you pay a price for this when you use the pliers/bit driver ... I like my Skeletool, but it sure has its limitations.
As always, this is just my own humble opinion ;).
P.S. Since I already own a Style CS, a Skeletool and a MUT, I know I will get myself a Signal eventually, but not at the current price (180 euro :ahhh). Maybe I should ask the help of one of the U.S. based members here to give me a "heads up" when there's a sweet deal on the Signal in one of the shops over there in the future
.;)
-
I agree ^.
MUT & Signal being in Skeletool family only because they have a cararbiner...Other than that they share very little common characteristic with Skeletool.Skeletool is heavily skeletonized, there is not a single straight line on Skeletool, everything is curved to fit user's hands. And Skeletool is a knife based MT.
-
Thanks for the review. I'm glad you like it even if I don't see why

-
Good review M, I think there are many users much like you. A casual MT user that likes a tool for what it could do. If the implements you do use handle the day to day chores then awesome. You are also on point about the times when a blunt object is handy. I dig my MUT for that very reason.
Thanks man
I actually really like the looks of the MUT, and have considered it in the past, but it's likely too big and heavy for me. Also gun specific, although the Signal is designed for a specific set of uses, and I like it, so the MUT would probably be just as useful to me in that sense. I've always wondered why a wood saw is on a gun specific tool
I think a metal file would be a better option there.That's one of life's great mysteries......
Sent from 9 miles from the face of the sun
-
@Top-Gear-24 said:
Great review and sweet pics mate
.Here are a couple more thoughts:
... I had another thought, but lost it
Then I had a different one, so I'll go with it and hope to remember the other later. I'm curious if there are any fans of the Skeletool who don't like the Signal, and I'm curious why. It seems to me like the Signal is a beefed up, slightly more robust Skele in a sense. I wish I had one in hand to fully remember the feel and why I wasn't a fan, as it also seems odd to me that I like the Signal just fine, but wasn't a Skele fan. I know part of it was the bit driver sticking out of the bottom of the handle and how that didn't feel right to me in plier mode. I also didn't like the pliers. I used to have a LM Freestyle, so I had some experience with that plier head type and just didn't like it. The ergonomics weren't great either, and the Skele is basically the same thing with the bit driver and caribiner thing added.I own three Skeletools, two regular ones and one CX (the CX is an early one, with the old plier head and serrated knife) and a MUT, and I can only say that, even though they seem to be members of the same family, they don't "feel" the same.
The MUT feels like a real "heavy duty" tool, just like the Surge or the ST300, but the Skeletool feels ... how should I say this ... a bit flimsy. In my opinion, the MUT is a plier based tool, with a OHO knife/saw and bit driver added on, while the Skeletool feels like a OHO knife, with a pair of mini pliers added on. I mean, the Skeletool feels great when I use it as a knife, but when I use the pliers, or the bit driver, it just feels very thin, akward and sometimes even painful.
I think it comes down to this, the Skeletool is great for pocket carrying, I like the pocket clip, and you hardly notice it in your pocket, thanks to its slim appearance, but you pay a price for this when you use the pliers/bit driver ... I like my Skeletool, but it sure has its limitations.
As always, this is just my own humble opinion ;).
P.S. Since I already own a Style CS, a Skeletool and a MUT, I know I will get myself a Signal eventually, but not at the current price (180 euro :ahhh). Maybe I should ask the help of one of the U.S. based members here to give me a "heads up" when there's a sweet deal on the Signal in one of the shops over there in the future
.;)
Thanks buddy, and thanks for the input on the Skeletool
What you said makes sense, and a good point in the fact that the Skele is more like a knife based MT. I believe bayoublade
got a good deal on one at Cutleryshop or something like that. It was mentioned in my Signal owner's club thread. -
Great review !
-
Great review (and pics) K Tib!!! I'm super happy that it seems to be working for you!!
And I agree, if you could dye the yellow red to match your color scheme, it would be mint!!Thanks buddy
I wish there was a way to dye those bits red, as that would indeed look great, and pair even better with that color scheme on my MechaRogue 
I wonder if Rit dye would work?

-
Although I don't own one, I think the MUT is an awesome tool. I like much of what it has to offer, and can live with the features I know I won't use. The best part are the longer bits, IMO. So, Yes, the MUT is right up there with the OHT on my "to get" list

-
Great review (and pics) K Tib!!! I'm super happy that it seems to be working for you!!
And I agree, if you could dye the yellow red to match your color scheme, it would be mint!!Thanks buddy
I wish there was a way to dye those bits red, as that would indeed look great, and pair even better with that color scheme on my MechaRogue 
I wonder if Rit dye would work?

I don't know what that is, but I'd be interested in it if it were a simple process....
Sent from my SM-G920R4 using Tapatalk
-
I just remembered my other thought....a few days later, and it wasn't anything major. Still figured I may as well mention it. It was regarding my issue with how much of the tool is visible when clipped to my pocket. It's light enough that I can just drop it into the pocket if I really want, so either way it carries fine for me.
Also, still really digging my Signal

Sent from my SM-G920R4 using Tapatalk
-
Monrogue, thanks for the review, and the good writeup. It's always good to see how fellow members see differently in the same tool!

-
Nice review. For me straight blade in outdoor tool is a must. Seperate serrated is a bonus (straight for carving wood and serrated to slice food, straight though for both if no serrated). For me combo is the worst option. Hammer would be nice. Many times would need some small hitting and tool without the hammer it's not nice to do. Maybe we see more blade options in future. Also in outdoors for me tool usage is Okay even can't use in closed position (bit driver and can opener).
-
I hadn't noticed the cut out for the awl, but it does appear to have been done on purpose!
My thoughts are pretty similar to the OP's. I think of it as a larger Skeletool, for when the Skele's pliers aren't up for the job, but I don't want to be lugging around my Charge.
After swapping the saw for scissors, I'm toying with the idea of leaving all the yellow bits behind and abandoning the whole "survival" shtick.
I have smaller hands and haven't had any ergonomic issues, or pinching. I also love having the hammer - probably the main reason I fancied the tool - I've risked the ends of my Charge a few too many times on things that just needed a swift tap.
The strong, thick blade is nice - I'm not fussy about the combo blade because I EDC a proper knife as well, and the combo offers me a serrated edge if I need it.
Thanks for the review!
-
Yup, it is a MT focused around hammer.
-
Thanks guys :) I'm still enjoying mine after around a couple months of carrying it pretty much every day, with a couple exceptions, and those are only due to church attire on Sundays. I think I've found one of my primary carry MTs with the Signal, which I know probably sounds odd to many considering I'm an office guy, and not an outdoors type. I hope everyone else who has one is enjoying it

-
I've had mine for 3 days and used the hammer a half a dozen times... I'm sold.
I see much hate, but the signal is like an ugly dog - only it's owner really gets it ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login