The Hacked Leatherman Owners Club.
-
Just for fun today I polished out the blade on my Rebar.

-
Sweet blade

Sent from my SM-G920R4 using Tapatalk
-
That looks great.

-
Thanks guys

-
-
I think I'm gonna dive into my ReCharge Today.
Just gonna pull a bit driver off and swap it with an Awl and Scissors if they will fit.
If I grind down the plier rest inside the handle, can I get away with a longer awl?
Also going to Gun Blue the screws just to get them darker again.
I'd also like to darken the scissors and awl just so they match but in not sure how to go about the scissors......
-
@NKlamerus said:
I think I'm gonna dive into my ReCharge Today.Just gonna pull a bit driver off and swap it with an Awl and Scissors if they will fit.
If I grind down the plier rest inside the handle, can I get away with a longer awl?
Also going to Gun Blue the screws just to get them darker again.
I'd also like to darken the scissors and awl just so they match but in not sure how to go about the scissors......
If you take out the bit driver on the side with the small bit driver, you should be able to fit in the awl, small bit driver, scissors in that side of the frame. The only thing that might be problematic is the height of the awl may interfere with the pliers. I say this because there is some variation in tolerances that allow it to work on some combinations of parts but not all. You can always grind the awl down a bit for more space.
My suggestion is to try it first without touching the plier rest and see if it closes to your satisfaction.
If you do decide to got the route of removing the rest, I found that I could carefully pull the rest and blade retainers off the rivet and then use a punch and hammer to flatten the rivet from the inside of the tool handle. This allowed good lockup of handle tools, extra space for the pliers and tools and meant that I didn't have to try breaking or grinding anything in the handles.
-
I think I'm gonna dive into my ReCharge Today.
Just gonna pull a bit driver off and swap it with an Awl and Scissors if they will fit.
If I grind down the plier rest inside the handle, can I get away with a longer awl?
Also going to Gun Blue the screws just to get them darker again.
I'd also like to darken the scissors and awl just so they match but in not sure how to go about the scissors......
If you take out the bit driver on the side with the small bit driver, you should be able to fit in the awl, small bit driver, scissors in that side of the frame. The only thing that might be problematic is the height of the awl may interfere with the pliers. I say this because there is some variation in tolerances that allow it to work on some combinations of parts but not all. You can always grind the awl down a bit for more space.
My suggestion is to try it first without touching the plier rest and see if it closes to your satisfaction.
If you do decide to got the route of removing the rest, I found that I could carefully pull the rest and blade retainers off the rivet and then use a punch and hammer to flatten the rivet from the inside of the tool handle. This allowed good lockup of handle tools, extra space for the pliers and tools and meant that I didn't have to try breaking or grinding anything in the handles.
Went the wrong route lol
O shortened the awl. Although I didn't really want an awl, I wanted a metal scribe I could draw lines with in paper. So I shortened it.
But the scissors...oh man....
-
Super Wave

</topic/63157
-
Like the addition of the pen!
wonder if I could add one to a surge? 🤔 -
Hey everyone I'm pretty new to this forum, but I thought I would share my mod/hacks that I did on my wave. There are only 4 original tools left, the large flathead screwdriver, the can opener/ bottle opener, the saw, and the file. The rest are from a wingman, a kick, a rebar, bought separately or fabricated. The obvious ones are s30v blade, the rebar pliers, and the wingman scissors. From the kick I used the medium flat head, and the 3D Philips. Where the old scissors were, I modified a 32 gig flash drive to fit. I modified a hacksaw blade to fit into the slot for the pocket clip and lanyard, it slides in and out and lock in both positions using the inside tools locking mechanism. I also added a notch in the other slot made for the pocket clip to hold a pair of tweezers from a SAK. The last thing is that I added the pocket clip from the wingman because it left the slot open and because I already had it.
ThanksSent from my iPhone using Tapatalk
Lots of neat mods! Like the tweezers! May have to add these to my surge as well!

-
Tweezers in Blast-Off


-
Knifeless Rebar


-
That's cool Obi!!!

-
This is a hack I guess?

-
@Obi1shinobee said:
Knifeless Rebar

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





