Work in progress: display cabinet
-
There was some SAK involvement today :) I realised I had to remove the guide bush to change router bits, and had forgotten to take a phillips screwdriver outside with me, so out came the trusty Explorer. I also used the small blade for a couple of marking tasks.

-
Final job of the day: using my makeshift router table to make rebates in the sides, top and bottom of the case, to receive the back panel. The sides get through-rebates; the top and bottom need stopped rebates. I'll square up the ends of those with a chisel after the case is assembled.
That's the last of the machining operations before I can start assembly, so hopefully I can at least get the door glued up during the week. Maybe the carcass as well, but I'll hold off on that until the door comes out of the clamps, in case any adjustments are required.


-
Call me old fashioned but I like those details carved in the wood.

-
-
I managed to get the door glued up last night. Took it out of the clamps this morning and it's come out square and flat

The second photo is of the top-right corner. You can see how the face of the joint is not flush, as a result of the adjustment I made for the twist in the top rail. It's much better to have this, which can easily be sanded smooth, than to have the joint flush but the verticals of the door out of parallel, which would result in a much larger error over the full height of the door.


-
Waiting to see the door handle. And final colour. And SAK collection :D 
-
-
Waiting to see the door handle. And final colour. And SAK collection :D 
:D
This is shaping up nicely

It's been awhile, but...
Spoiler:

:D :D :D :D
-
Nice and interesting woodwork S


-
@Sparky415 said:
Nice and interesting woodwork S

+1 :D
-
Looking good

-
Now I can tell you the final colour, or should I make you wait? :)
Make me wait, please. No need to rush things

I know, I know...
Spoiler:
You're waiting for me to put up a "That's what she said" pic, right?...
Well, sorry to disappoint you...[spoiler]
I'm more mature than that, you know?...[spoiler]
I've just one thing to say to you...[spoiler]


[/spoiler]
[/spoiler]
[/spoiler] -
I can't complain, I brought this upon myself :D 
-
Call me old fashioned but I like those details carved in the wood.

This is you:

- :D
Nope, not a fan of whiskey and bourbon. I like a good Bloody Mary though

-
Assembling the carcass. One of the problems I find with pocket screws is that they have a tendency to pull the work out of position as you tighten them down. So to deal with that, I've cut a gauge board to the length of the inside of the cabinet, and clamped it on top of the bottom panel. That gives me something to hold the side panel firmly against as I drive the screws. It'll also ensure that the sides end up the same distance apart at the top and bottom.


-
With the glue set on the carcass, I can test-fit the door. The fit is not too bad. Looking from the front, the gap is pretty even all round. But somehow the carcass has got a bit of a twist in it so my nice flat door does not sit flush
Probably due to uneven tension on the pocket screws. I'm wishing I'd used a different sort of joint now. However I'm optimistic that I'll be able to pull the twist out when I fix it to the wall, if I put a screw in each corner. So hopefully it's fixable.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


