Work in progress: display cabinet
-
I managed to get the door glued up last night. Took it out of the clamps this morning and it's come out square and flat

The second photo is of the top-right corner. You can see how the face of the joint is not flush, as a result of the adjustment I made for the twist in the top rail. It's much better to have this, which can easily be sanded smooth, than to have the joint flush but the verticals of the door out of parallel, which would result in a much larger error over the full height of the door.


-
Waiting to see the door handle. And final colour. And SAK collection :D 
-
-
Waiting to see the door handle. And final colour. And SAK collection :D 
:D
This is shaping up nicely

It's been awhile, but...
Spoiler:

:D :D :D :D
-
Nice and interesting woodwork S


-
@Sparky415 said:
Nice and interesting woodwork S

+1 :D
-
Looking good

-
Now I can tell you the final colour, or should I make you wait? :)
Make me wait, please. No need to rush things

I know, I know...
Spoiler:
You're waiting for me to put up a "That's what she said" pic, right?...
Well, sorry to disappoint you...[spoiler]
I'm more mature than that, you know?...[spoiler]
I've just one thing to say to you...[spoiler]


[/spoiler]
[/spoiler]
[/spoiler] -
I can't complain, I brought this upon myself :D 
-
Call me old fashioned but I like those details carved in the wood.

This is you:

- :D
Nope, not a fan of whiskey and bourbon. I like a good Bloody Mary though

-
Assembling the carcass. One of the problems I find with pocket screws is that they have a tendency to pull the work out of position as you tighten them down. So to deal with that, I've cut a gauge board to the length of the inside of the cabinet, and clamped it on top of the bottom panel. That gives me something to hold the side panel firmly against as I drive the screws. It'll also ensure that the sides end up the same distance apart at the top and bottom.


-
With the glue set on the carcass, I can test-fit the door. The fit is not too bad. Looking from the front, the gap is pretty even all round. But somehow the carcass has got a bit of a twist in it so my nice flat door does not sit flush
Probably due to uneven tension on the pocket screws. I'm wishing I'd used a different sort of joint now. However I'm optimistic that I'll be able to pull the twist out when I fix it to the wall, if I put a screw in each corner. So hopefully it's fixable.

-
I think (and hope) that little problem can be fixed, shibafu. I like how you didn't use L brackets and that there won't be a door handle, by the way

I'm really enjoying this thread. I love working with wood. Minds outta the gutter, folks
:DWhen I was a kid I wanted to become a carpenter, making pieces of furniture in particular. My parents convinced me this wouldn't pay off. Sometimes I regret listening to them.
-
I can't complain, I brought this upon myself :D 
Dude, really?!
Spoiler:
I mean...

Well, he could have said that as well, couldn't he? Provided he's not one to always want to be right.

Am I missing something? -
A little more progress - I morticed out for the lock on the back of the door.
I also did a bit of experimenting with cutting keyholes on a piece of scrap. I couldn't really figure out how to fit the keyhole escutcheon though. The one I have is called a "thread escutcheon" which is like a lining inside the keyhole, but it has smooth tapered sides and just springs out of the hole again when I try to tap it in. I think I might ditch it and try to find a surface-mounting escutcheon instead.


-
Very neat work and tidy work space there S

(that’s odd there’s a fused clock connector behind your frame
)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
