Swiza D04 - thoughts after 10 days of use
-
Hi,
there is a hole/gap in the spring for the can opener. What do you
mean any chance to use this (keyring or anything else)?
-
I got my D04 2 days ago and all the back springs, except the can opener, are very strong. I am thinking about cutting the liner lock and make it a non lock. The spring is stronger than my 91mm Victorinox and I don't like locking blades.
I have no complains about ergonomics, if I hold it like a hammer I can feel the the tools sticking out. But I don't use my knife like a hammer. It doesn't bother me at all in actual use.
The blade is sharp enough to shave my arm. The main downsides for me are:
- The shape of the Philips, too pointy.
- The large flat screwdriver is very thin, I am afraid of using it in pry tasks as I usually do with Vics.
- No keyring
Overall I like it, I don't mind the holes in the blade. It is easier to open and that is a big plus for me during the winter.
Since our impressions about the back springs are so different, I wonder if they are still changing things in the first series.
-
I agree with you about the large flat SD. Good tension on backspring and
90 degree half stop but very thin :-
The can opener seems stronger and more usable for pry works but here the
spring is really weak.
The spring tension on the large blade, the phillips and the awl are good. For
me is the locking blade and the good "blade size - cutting edge length" ratio
the best advantages of the SWIZAs. -
does the blade tip lift up past the handles when you close the phillips drivers?
-
@Amedio said:
I got my D04 2 days ago and all the back springs, except the can opener, are very strong. I am thinking about cutting the liner lock and make it a non lock. The spring is stronger than my 91mm Victorinox and I don't like locking blades.I have no complains about ergonomics, if I hold it like a hammer I can feel the the tools sticking out. But I don't use my knife like a hammer. It doesn't bother me at all in actual use.
The blade is sharp enough to shave my arm. The main downsides for me are:
- The shape of the Philips, too pointy.
- The large flat screwdriver is very thin, I am afraid of using it in pry tasks as I usually do with Vics.
- No keyring
Overall I like it, I don't mind the holes in the blade. It is easier to open and that is a big plus for me during the winter.
Since our impressions about the back springs are so different, I wonder if they are still changing things in the first series.
Yup, large flat has a strong spring in mine too...
Weak are for the can-opener, Phillips, awl and main blade (although its no problem as it is locking). I'm surprised that the spring on your blade is strong enough you consider removing the lock. That is both good and bad news (I like me some strong spring, but it also means inconsistency in production).I ruined both Phillips and small screwdrivers on the first use. Then I purposefully tortured the large flat a bit and it held up.
I mostly hold my blades with the pointer finger on the back of the blade. With the Swiza my ring finger exactly grips over the thin large flat and that is quite uncomfortable.
-
The more I play around with it, the more I like my D04

For me it comes in handy on daily light use where it works fine.
So it work as designed with proper quality and fresh look and feel. -
For a first series, they look to be onto something. They really need to add the tweezers [emoji6]
Sent from 9 miles from the face of the sun
-
Really great reviews guys, you are really starting to make me want one. Anyone know if there is a timeline when they will start selling in the states.
-
I thought the very first review was especially good!!

-
@50ft-trad said:
@50ft-trad said:
And as one further not, I will also say I have had a few G&Ts this evening, and reserve the right to read this comment tomorrow and realise I've been talking out of the wrong orifice

Apart from a couple of typos everything seems in order to me

Good too heer


:P
:D
The impotent question is actually "Which Gin?" ...
-
@Storky said:
Sorry, double Post
does the blade tip lift up past the handles when you close the phillips drivers?
Not on my two layer D04, but there are several reports this happens on the one layer models

No problems and thanks for the response. A few tweaks here and there and Swiza would go from good to great.
-
@Fast Bill said:
@50ft-trad said:
@50ft-trad said:
And as one further not, I will also say I have had a few G&Ts this evening, and reserve the right to read this comment tomorrow and realise I've been talking out of the wrong orifice

Apart from a couple of typos everything seems in order to me

Good too heer


:P
:D
The impotent question is actually "Which Gin?" ...
Gordons.... I'd run out of Hendricks :)
-
I don't see these available anywhere in the Colonies.
-
@50ft-trad said:
@Fast Bill said:
@50ft-trad said:
[quote author=50ft-trad link=topic=62906.msg1176873#msg1176873 date=1446590858]
And as one further not, I will also say I have had a few G&Ts this evening, and reserve the right to read this comment tomorrow and realise I've been talking out of the wrong orifice
Apart from a couple of typos everything seems in order to me

Good too heer


:P
:D
The impotent question is actually "Which Gin?" ...
Gordons.... I'd run out of Hendricks :)
[/quote]Ah well, any portable snort in a storm eh ? I'm rather partial to Adnams gin

-
@Fast Bill said:
@50ft-trad said:
@Fast Bill said:
@50ft-trad said:
[quote author=firiki link=topic=62906.msg1178016#msg1178016 date=1446764489]
[quote author=50ft-trad link=topic=62906.msg1176873#msg1176873 date=1446590858]
And as one further not, I will also say I have had a few G&Ts this evening, and reserve the right to read this comment tomorrow and realise I've been talking out of the wrong orifice
Apart from a couple of typos everything seems in order to me

Good too heer


:P
:D
The impotent question is actually "Which Gin?" ...
Gordons.... I'd run out of Hendricks :)
[/quote]Ah well, any portable snort in a storm eh ? I'm rather partial to Adnams gin

[/quote]Hendricks is nice, I also quite like the Bombay Sapphire regular and east but my favorite is of course the one with Edelweiss in it (right bottle) :D
-
So, XELLENT is a spirits maker? I tought is was a vodka.
-
@firiki said:
So, XELLENT is a spirits maker? I tought is was a vodka.Xellent is a branch of a larger Swiss Spirit maker that makes high class Spirits (currently vodka & gin). I think they started with the vodka and due to its success expanded with the gin. The current market is good for high quality, stylish, Swiss products. So, I would not be surprised if the line up grew even more.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


