Swiza D04 - thoughts after 10 days of use
-
The more I play around with it, the more I like my D04

For me it comes in handy on daily light use where it works fine.
So it work as designed with proper quality and fresh look and feel. -
For a first series, they look to be onto something. They really need to add the tweezers [emoji6]
Sent from 9 miles from the face of the sun
-
Really great reviews guys, you are really starting to make me want one. Anyone know if there is a timeline when they will start selling in the states.
-
I thought the very first review was especially good!!

-
@50ft-trad said:
@50ft-trad said:
And as one further not, I will also say I have had a few G&Ts this evening, and reserve the right to read this comment tomorrow and realise I've been talking out of the wrong orifice

Apart from a couple of typos everything seems in order to me

Good too heer


:P
:D
The impotent question is actually "Which Gin?" ...
-
@Storky said:
Sorry, double Post
does the blade tip lift up past the handles when you close the phillips drivers?
Not on my two layer D04, but there are several reports this happens on the one layer models

No problems and thanks for the response. A few tweaks here and there and Swiza would go from good to great.
-
@Fast Bill said:
@50ft-trad said:
@50ft-trad said:
And as one further not, I will also say I have had a few G&Ts this evening, and reserve the right to read this comment tomorrow and realise I've been talking out of the wrong orifice

Apart from a couple of typos everything seems in order to me

Good too heer


:P
:D
The impotent question is actually "Which Gin?" ...
Gordons.... I'd run out of Hendricks :)
-
I don't see these available anywhere in the Colonies.
-
@50ft-trad said:
@Fast Bill said:
@50ft-trad said:
[quote author=50ft-trad link=topic=62906.msg1176873#msg1176873 date=1446590858]
And as one further not, I will also say I have had a few G&Ts this evening, and reserve the right to read this comment tomorrow and realise I've been talking out of the wrong orifice
Apart from a couple of typos everything seems in order to me

Good too heer


:P
:D
The impotent question is actually "Which Gin?" ...
Gordons.... I'd run out of Hendricks :)
[/quote]Ah well, any portable snort in a storm eh ? I'm rather partial to Adnams gin

-
@Fast Bill said:
@50ft-trad said:
@Fast Bill said:
@50ft-trad said:
[quote author=firiki link=topic=62906.msg1178016#msg1178016 date=1446764489]
[quote author=50ft-trad link=topic=62906.msg1176873#msg1176873 date=1446590858]
And as one further not, I will also say I have had a few G&Ts this evening, and reserve the right to read this comment tomorrow and realise I've been talking out of the wrong orifice
Apart from a couple of typos everything seems in order to me

Good too heer


:P
:D
The impotent question is actually "Which Gin?" ...
Gordons.... I'd run out of Hendricks :)
[/quote]Ah well, any portable snort in a storm eh ? I'm rather partial to Adnams gin

[/quote]Hendricks is nice, I also quite like the Bombay Sapphire regular and east but my favorite is of course the one with Edelweiss in it (right bottle) :D
-
So, XELLENT is a spirits maker? I tought is was a vodka.
-
@firiki said:
So, XELLENT is a spirits maker? I tought is was a vodka.Xellent is a branch of a larger Swiss Spirit maker that makes high class Spirits (currently vodka & gin). I think they started with the vodka and due to its success expanded with the gin. The current market is good for high quality, stylish, Swiss products. So, I would not be surprised if the line up grew even more.
-
So, XELLENT is a spirits maker? I tought is was a vodka.
Xellent is a branch of a larger Swiss Spirit maker that makes high class Spirits (currently vodka & gin). I think they started with the vodka and due to its success expanded with the gin. The current market is good for high quality, stylish, Swiss products. So, I would not be surprised if the line up grew even more.
Good Gin there ... but that's not a SAK is it ? Shurely Shome Mishtake ?

-
@Fast Bill said:
So, XELLENT is a spirits maker? I tought is was a vodka.
Xellent is a branch of a larger Swiss Spirit maker that makes high class Spirits (currently vodka & gin). I think they started with the vodka and due to its success expanded with the gin. The current market is good for high quality, stylish, Swiss products. So, I would not be surprised if the line up grew even more.
Good Gin there ... but that's not a SAK is it ? Shurely Shome Mishtake ?

Sure it is... Shwiss AlKohol...
-
What caught my attention was the closing remark of
"....you are better off buying a Spartan/Pioneer/Soldier at half the price."considering that a spartan doesn't really cost that much these days.
Well, half the price is rough estimate because prices are not global. Here I can get a soldier in new condition for 3 - 5$ which is a tenth of the Swiza, a new Spartan probably costs less than 1/3th (its been a while since I bought a regular Spartan).
Where in Switzerland? I'm sort of planning on heading there, and might as well pick up a handful of them at that price!
-
So, XELLENT is a spirits maker? I tought is was a vodka.
Xellent is a branch of a larger Swiss Spirit maker that makes high class Spirits (currently vodka & gin). I think they started with the vodka and due to its success expanded with the gin. The current market is good for high quality, stylish, Swiss products. So, I would not be surprised if the line up grew even more.
Gotcha. I might give them a try. I've only had a white wine in a Swiss-looking bottle, labelled Forza Svizzera in three more languages that a Swiss girl had brought along. I don't like white wine and that one was no exception.

-
What caught my attention was the closing remark of
"....you are better off buying a Spartan/Pioneer/Soldier at half the price."considering that a spartan doesn't really cost that much these days.
Well, half the price is rough estimate because prices are not global. Here I can get a soldier in new condition for 3 - 5$ which is a tenth of the Swiza, a new Spartan probably costs less than 1/3th (its been a while since I bought a regular Spartan).
Where in Switzerland? I'm sort of planning on heading there, and might as well pick up a handful of them at that price!
Spartans you get everywhere including Migros. Soldiers you get at flea-markets and thrift stores. SAKs are a pretty common sight on flea-markets, your best chance of getting a good price is a booth with other military articles but not a whole lot of SAKs.
Prices are about the same everywhere in Switzerland with few exceptions. Of course the cheapest over-all is the factory store in Ibach (10% on everything, and if you are lucky something good is on sale). If you actually go there, check out the Alox models, they still have some with the marlin spike. And if you are looking for a limited edition (wood-scaled / Damascus blade) ask the ladies there is always a chance that one came back from a dealer (and you will get it at 10% discount). They also sell scales and individual parts (bit-wrenches,CT-bits etc.)
If you are looking for something special (like the Wenger Vallotton Saugy Life Series) ask me, I might know a shop that still has them for sale ;)
-
Hi-jacking this thread back to Swiza stuff, although of course not really the original topic. (There has to be a limit to keeping on topic...)
Grathr graciously organized getting a couple of the aforementioned knives into Norway, and today I got my grubby hands on mine. Some quick impressions playing around with it follow.
I opted for the D03 in red. To those who feel those knives don't “deserve” to be red, I humbly disagree. The shade is totally different from those used by Victorinox anyway.
I wanted to like this knife, because it seems like a happy, little knife when you hold it. I expected to hate the blade lock, but the mechanism is easily inspectable, and if the soft scale somehow should break or become stiff (i.e. any obvious failure mode), you can still operate it. No lateral blade play, although it has the same behavior as 111 mm as it is more a slip-joint secured by a liner lock than a conventional liner lock. This causes, at least on my knife, it to be possible to push the blade a little closed when the knife is open before the lock stops it. That isn't something that annoys me, but I have noticed some people dislike it.
As others have noted, the spring on the can opener is softer than on any of the other tools in the knife. It's still stiff enough to be “OK”, but I would have preferred stiffer lock-up personally. I found it interesting that, as opposed to big brother Vic, they have a ground finish to parts of the tools, like the screwdrivers, instead of having everything polished. Time will tell whether this affects the stainless quality, as they have opted for a steel with a lot of chromium and not that much carbon. They have implied 440A, but if this is correct, I wonder if they have hardened the tools lower than the blade as they scratch ridiculously easily. (As posted by others.)
What really keeps it from occupying a place in my EDC rotation is easy to see from any photo: The “banana shape” of the open knife. This makes the knife similar to knives with designs from the world of small game hunting. For a knife design, the edge can effectively dip down, stay in line with, or move up and away from the center line of the handle. Many hunting knives dip down, but all-round knives should form a straight line (consider a Mora or a Vic) for optimal flexibility and the highest possible number of ways to hold and use the knife. The Swiza chooses to become better at some things and worse at others. What it becomes worse at, like whittling, is far more important to me than what it becomes better at. So whether the choice was for looks or use, it is not for me (as a general EDC knife).
The way the tools protrude a lot from the handle links up to the previous paragraph: It makes some ways of holding the knife uncomfortable, but for what I guess is the default way of holding the design, with the thumb resting on the tang, it is just fine.
Summary for first impressions: Very few brands get so much correct with their first offering in this price range, but I from my point of view, the basic frame has some problems if it seeks to be a true all-rounder.
-
@Steinar said:
Hi-jacking this thread back to Swiza stuff, although of course not really the original topic. (There has to be a limit to keeping on topic...)Grathr graciously organized getting a couple of the aforementioned knives into Norway, and today I got my grubby hands on mine. Some quick impressions playing around with it follow.
I opted for the D03 in red. To those who feel those knives don't “deserve” to be red, I humbly disagree. The shade is totally different from those used by Victorinox anyway.
I wanted to like this knife, because it seems like a happy, little knife when you hold it. I expected to hate the blade lock, but the mechanism is easily inspectable, and if the soft scale somehow should break or become stiff (i.e. any obvious failure mode), you can still operate it. No lateral blade play, although it has the same behavior as 111 mm as it is more a slip-joint secured by a liner lock than a conventional liner lock. This causes, at least on my knife, it to be possible to push the blade a little closed when the knife is open before the lock stops it. That isn't something that annoys me, but I have noticed some people dislike it.
As others have noted, the spring on the can opener is softer than on any of the other tools in the knife. It's still stiff enough to be “OK”, but I would have preferred stiffer lock-up personally. I found it interesting that, as opposed to big brother Vic, they have a ground finish to parts of the tools, like the screwdrivers, instead of having everything polished. Time will tell whether this affects the stainless quality, as they have opted for a steel with a lot of chromium and not that much carbon. They have implied 440A, but if this is correct, I wonder if they have hardened the tools lower than the blade as they scratch ridiculously easily. (As posted by others.)
What really keeps it from occupying a place in my EDC rotation is easy to see from any photo: The “banana shape” of the open knife. This makes the knife similar to knives with designs from the world of small game hunting. For a knife design, the edge can effectively dip down, stay in line with, or move up and away from the center line of the handle. Many hunting knives dip down, but all-round knives should form a straight line (consider a Mora or a Vic) for optimal flexibility and the highest possible number of ways to hold and use the knife. The Swiza chooses to become better at some things and worse at others. What it becomes worse at, like whittling, is far more important to me than what it becomes better at. So whether the choice was for looks or use, it is not for me (as a general EDC knife).
The way the tools protrude a lot from the handle links up to the previous paragraph: It makes some ways of holding the knife uncomfortable, but for what I guess is the default way of holding the design, with the thumb resting on the tang, it is just fine.
Summary for first impressions: Very few brands get so much correct with their first offering in this price range, but I from my point of view, the basic frame has some problems if it seeks to be a true all-rounder.
I got to play a little with your D04 before sending it to you, and I was not a fan of the openers, the weak spring and the way they stick out of the handle.
IMO the D02 is a better executed tool. -
I somehow get the feeling the D01/02 was the knife they really designed, and then they started adding tools. Also, there is something a little “off” with how the tools are shaped, there no small details or acute angles. I guess it's a consequence of their manufacturing process.
Perhaps the designer team were stereotypical Francophones who do not drink beer. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login