Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

Swiza D04 - thoughts after 10 days of use

Scheduled Pinned Locked Moved Swiss Army Knights Forum
116 Posts 1 Posters 25.6k Views
  1. Home
  2. Tool Talk
  3. Swiss Army Knights Forum
  4. Swiza D04 - thoughts after 10 days of use
Swiza D04 - thoughts after 10 days of use
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • AimlessWanderer Offline
    AimlessWanderer
    Posts: 17,518
    AimlessWanderer Offline
    AimlessWanderer
    wrote on last edited by
    #53 Quote Reply

      @Fast Bill said:

      @50ft-trad said:

      @firiki said:

      @50ft-trad said:

      And as one further not, I will also say I have had a few G&Ts this evening, and reserve the right to read this comment tomorrow and realise I've been talking out of the wrong orifice :tu:

      Apart from a couple of typos everything seems in order to me :cheers:

      Good too heer :tu:

      :whistle:

      :P

      :D

      The impotent question is actually "Which Gin?" ...

      Gordons.... I'd run out of Hendricks :)

      1 Reply Last reply
      • powernoodle Offline
        powernoodle
        Posts: 7,103
        powernoodle Offline
        powernoodle
        wrote on last edited by
        #54 Quote Reply

          I don't see these available anywhere in the Colonies.

          Merit Badges
          Duct Tape One Piece Collector BO Tools Level 3 Flashlight Juice Collector Level 2 LM Surge Challenge Level 3 SOG Power Challenge The MIDLMAN Challenge LM Squirt Challenge Level 1 Discontinued SAK/MT Challenge EDC Pocket Dump Challenge LM Rebar Challenge Victorinox Spirit Challenge LM Signal Challenge LM OHT Challenge Gerber MP Challenge Victorinox SwissTool Challenge MTo Store User 111mm SAK Challenge Buck 110 Challenge Buck User Chuck Yeager Challenge SAK STACK Challenge 30 Days 30 day challenge - 58, 65 and 74mm SAKs Buck 112 Ranger 30 Day Challenge 30 Blades 30 Days Traditional Folder Challenge Skeletool 30 Day Challenge The SUPER Challenge Delemont 30 Day Challenge PST 30 Day Challenge Santa 30 Day Combo Edge Challenge Explorer 30 Day Challenge 30 day Spartan Challenge Loaded Pockets 30 Day Challenge LM Squirt Challenge Level 2 Alox Addict Challenge MiniChamp 30 day Challenge Time Lord Level 3 Gerber CD Challenge LM Micra Challenge MTo Anniversary Challenge Bond 30 Day Challenge Wally Badge 30 Day Ratchet Challenge 30 Day Keychain Pliers Challenge Minimal SAK Challenge  Classic 30 Day Challenge 20th Anniversary Anything Goes Challenge
          1 Reply Last reply
          • Fast Bill Offline
            Fast Bill
            Posts: 4,968
            Fast Bill Offline
            Fast Bill
            wrote on last edited by
            #55 Quote Reply

              @50ft-trad said:

              @Fast Bill said:

              @50ft-trad said:

              @firiki said:

              [quote author=50ft-trad link=topic=62906.msg1176873#msg1176873 date=1446590858]
              And as one further not, I will also say I have had a few G&Ts this evening, and reserve the right to read this comment tomorrow and realise I've been talking out of the wrong orifice :tu:

              Apart from a couple of typos everything seems in order to me :cheers:

              Good too heer :tu:

              :whistle:

              :P

              :D

              The impotent question is actually "Which Gin?" ...

              Gordons.... I'd run out of Hendricks :)
              [/quote]

              Ah well, any portable snort in a storm eh ? I'm rather partial to Adnams gin
              :cheers:

              Merit Badges
              Titanium Time Lord Level 3 Minimal SAK Challenge ALOX with Scissors MTO Tool MTo Store User Ignore Sporkman The Pioneer X Challenge Santa 30 day challenge - 58, 65 and 74mm SAKs Chuck Yeager Challenge Victorinox Spirit Challenge Jack'O Lantern Badge Flashlight The Huntsman Challenge SAK STACK Challenge 30 Days 111mm SAK Challenge SAK STACK Challenge 60 Days Victorinox SwissTool Challenge 30 day Spartan Challenge
              1 Reply Last reply
              • Etherealicer Offline
                Etherealicer
                Admin Team
                Posts: 12,034
                Etherealicer Offline
                Etherealicer
                Admin Team
                wrote on last edited by
                #56 Quote Reply

                  @Fast Bill said:

                  @50ft-trad said:

                  @Fast Bill said:

                  @50ft-trad said:

                  [quote author=firiki link=topic=62906.msg1178016#msg1178016 date=1446764489]
                  [quote author=50ft-trad link=topic=62906.msg1176873#msg1176873 date=1446590858]
                  And as one further not, I will also say I have had a few G&Ts this evening, and reserve the right to read this comment tomorrow and realise I've been talking out of the wrong orifice :tu:

                  Apart from a couple of typos everything seems in order to me :cheers:

                  Good too heer :tu:

                  :whistle:

                  :P

                  :D

                  The impotent question is actually "Which Gin?" ...

                  Gordons.... I'd run out of Hendricks :)
                  [/quote]

                  Ah well, any portable snort in a storm eh ? I'm rather partial to Adnams gin
                  :cheers:
                  [/quote]Hendricks is nice, I also quite like the Bombay Sapphire regular and east but my favorite is of course the one with Edelweiss in it (right bottle) :D

                  jc_20151110_31.jpg

                  1 Reply Last reply
                  • firiki Offline
                    firiki
                    Posts: 6,076
                    firiki Offline
                    firiki
                    wrote on last edited by
                    #57 Quote Reply

                      So, XELLENT is a spirits maker? I tought is was a vodka.

                      1 Reply Last reply
                      • Etherealicer Offline
                        Etherealicer
                        Admin Team
                        Posts: 12,034
                        Etherealicer Offline
                        Etherealicer
                        Admin Team
                        wrote on last edited by
                        #58 Quote Reply

                          @firiki said:
                          So, XELLENT is a spirits maker? I tought is was a vodka.

                          Xellent is a branch of a larger Swiss Spirit maker that makes high class Spirits (currently vodka & gin). I think they started with the vodka and due to its success expanded with the gin. The current market is good for high quality, stylish, Swiss products. So, I would not be surprised if the line up grew even more.

                          1 Reply Last reply
                          • Fast Bill Offline
                            Fast Bill
                            Posts: 4,968
                            Fast Bill Offline
                            Fast Bill
                            wrote on last edited by
                            #59 Quote Reply

                              @Etherealicer said:

                              @firiki said:

                              So, XELLENT is a spirits maker? I tought is was a vodka.

                              Xellent is a branch of a larger Swiss Spirit maker that makes high class Spirits (currently vodka & gin). I think they started with the vodka and due to its success expanded with the gin. The current market is good for high quality, stylish, Swiss products. So, I would not be surprised if the line up grew even more.

                              Good Gin there ... but that's not a SAK is it ? Shurely Shome Mishtake ? :think:

                              Merit Badges
                              Titanium Time Lord Level 3 Minimal SAK Challenge ALOX with Scissors MTO Tool MTo Store User Ignore Sporkman The Pioneer X Challenge Santa 30 day challenge - 58, 65 and 74mm SAKs Chuck Yeager Challenge Victorinox Spirit Challenge Jack'O Lantern Badge Flashlight The Huntsman Challenge SAK STACK Challenge 30 Days 111mm SAK Challenge SAK STACK Challenge 60 Days Victorinox SwissTool Challenge 30 day Spartan Challenge
                              1 Reply Last reply
                              • Etherealicer Offline
                                Etherealicer
                                Admin Team
                                Posts: 12,034
                                Etherealicer Offline
                                Etherealicer
                                Admin Team
                                wrote on last edited by
                                #60 Quote Reply

                                  @Fast Bill said:

                                  @Etherealicer said:

                                  @firiki said:

                                  So, XELLENT is a spirits maker? I tought is was a vodka.

                                  Xellent is a branch of a larger Swiss Spirit maker that makes high class Spirits (currently vodka & gin). I think they started with the vodka and due to its success expanded with the gin. The current market is good for high quality, stylish, Swiss products. So, I would not be surprised if the line up grew even more.

                                  Good Gin there ... but that's not a SAK is it ? Shurely Shome Mishtake ? :think:

                                  Sure it is... Shwiss AlKohol...

                                  1 Reply Last reply
                                  • cody6268 Offline
                                    cody6268
                                    Posts: 6,250
                                    cody6268 Offline
                                    cody6268
                                    wrote on last edited by
                                    #61 Quote Reply

                                      @Etherealicer said:

                                      @Zephon said:

                                      What caught my attention was the closing remark of
                                      "....you are better off buying a Spartan/Pioneer/Soldier at half the price."

                                      considering that a spartan doesn't really cost that much these days.

                                      Well, half the price is rough estimate because prices are not global. Here I can get a soldier in new condition for 3 - 5$ which is a tenth of the Swiza, a new Spartan probably costs less than 1/3th (its been a while since I bought a regular Spartan).

                                      Where in Switzerland? I'm sort of planning on heading there, and might as well pick up a handful of them at that price!

                                      Merit Badges
                                      Hook User Scaler User Discontinued SAK/MT Challenge Axe User Zip Tie User The Huntsman Challenge Traditional Folder Challenge Flashlight Off Brand MT Challenge Level 3 LM Surge Challenge Level 3 The SUPER Challenge Buck 110 Challenge Buck 112 Ranger 30 Day Challenge Fieldmaster 30 Day Challenge SAK STACK Challenge 30 Days Soldier 30 Day Challenge Titanium Spyderco 30 Day Challenge The Nessmuk Challenge Folding Hunter 30 days Challenge Daredevil challenge SAK-alike Challenge Chainsaw User Utility Knife  30 Day Challenge Buck 30 Day Challenge
                                      1 Reply Last reply
                                      • firiki Offline
                                        firiki
                                        Posts: 6,076
                                        firiki Offline
                                        firiki
                                        wrote on last edited by
                                        #62 Quote Reply

                                          @Etherealicer said:

                                          @firiki said:

                                          So, XELLENT is a spirits maker? I tought is was a vodka.

                                          Xellent is a branch of a larger Swiss Spirit maker that makes high class Spirits (currently vodka & gin). I think they started with the vodka and due to its success expanded with the gin. The current market is good for high quality, stylish, Swiss products. So, I would not be surprised if the line up grew even more.

                                          Gotcha. I might give them a try. I've only had a white wine in a Swiss-looking bottle, labelled Forza Svizzera in three more languages that a Swiss girl had brought along. I don't like white wine and that one was no exception. :salute:

                                          1 Reply Last reply
                                          • Etherealicer Offline
                                            Etherealicer
                                            Admin Team
                                            Posts: 12,034
                                            Etherealicer Offline
                                            Etherealicer
                                            Admin Team
                                            wrote on last edited by
                                            #63 Quote Reply

                                              @cody6268 said:

                                              @Etherealicer said:

                                              @Zephon said:

                                              What caught my attention was the closing remark of
                                              "....you are better off buying a Spartan/Pioneer/Soldier at half the price."

                                              considering that a spartan doesn't really cost that much these days.

                                              Well, half the price is rough estimate because prices are not global. Here I can get a soldier in new condition for 3 - 5$ which is a tenth of the Swiza, a new Spartan probably costs less than 1/3th (its been a while since I bought a regular Spartan).

                                              Where in Switzerland? I'm sort of planning on heading there, and might as well pick up a handful of them at that price!

                                              Spartans you get everywhere including Migros. Soldiers you get at flea-markets and thrift stores. SAKs are a pretty common sight on flea-markets, your best chance of getting a good price is a booth with other military articles but not a whole lot of SAKs.

                                              Prices are about the same everywhere in Switzerland with few exceptions. Of course the cheapest over-all is the factory store in Ibach (10% on everything, and if you are lucky something good is on sale). If you actually go there, check out the Alox models, they still have some with the marlin spike. And if you are looking for a limited edition (wood-scaled / Damascus blade) ask the ladies there is always a chance that one came back from a dealer (and you will get it at 10% discount). They also sell scales and individual parts (bit-wrenches,CT-bits etc.)

                                              If you are looking for something special (like the Wenger Vallotton Saugy Life Series) ask me, I might know a shop that still has them for sale ;)

                                              1 Reply Last reply
                                              • Steinar Offline
                                                Steinar
                                                Posts: 3,435
                                                Steinar Offline
                                                Steinar
                                                wrote on last edited by
                                                #64 Quote Reply

                                                  Hi-jacking this thread back to Swiza stuff, although of course not really the original topic. (There has to be a limit to keeping on topic...)

                                                  Grathr graciously organized getting a couple of the aforementioned knives into Norway, and today I got my grubby hands on mine. Some quick impressions playing around with it follow.

                                                  I opted for the D03 in red. To those who feel those knives don't “deserve” to be red, I humbly disagree. The shade is totally different from those used by Victorinox anyway.

                                                  I wanted to like this knife, because it seems like a happy, little knife when you hold it. I expected to hate the blade lock, but the mechanism is easily inspectable, and if the soft scale somehow should break or become stiff (i.e. any obvious failure mode), you can still operate it. No lateral blade play, although it has the same behavior as 111 mm as it is more a slip-joint secured by a liner lock than a conventional liner lock. This causes, at least on my knife, it to be possible to push the blade a little closed when the knife is open before the lock stops it. That isn't something that annoys me, but I have noticed some people dislike it.

                                                  As others have noted, the spring on the can opener is softer than on any of the other tools in the knife. It's still stiff enough to be “OK”, but I would have preferred stiffer lock-up personally. I found it interesting that, as opposed to big brother Vic, they have a ground finish to parts of the tools, like the screwdrivers, instead of having everything polished. Time will tell whether this affects the stainless quality, as they have opted for a steel with a lot of chromium and not that much carbon. They have implied 440A, but if this is correct, I wonder if they have hardened the tools lower than the blade as they scratch ridiculously easily. (As posted by others.)

                                                  What really keeps it from occupying a place in my EDC rotation is easy to see from any photo: The “banana shape” of the open knife. This makes the knife similar to knives with designs from the world of small game hunting. For a knife design, the edge can effectively dip down, stay in line with, or move up and away from the center line of the handle. Many hunting knives dip down, but all-round knives should form a straight line (consider a Mora or a Vic) for optimal flexibility and the highest possible number of ways to hold and use the knife. The Swiza chooses to become better at some things and worse at others. What it becomes worse at, like whittling, is far more important to me than what it becomes better at. So whether the choice was for looks or use, it is not for me (as a general EDC knife).

                                                  The way the tools protrude a lot from the handle links up to the previous paragraph: It makes some ways of holding the knife uncomfortable, but for what I guess is the default way of holding the design, with the thumb resting on the tang, it is just fine.

                                                  Summary for first impressions: Very few brands get so much correct with their first offering in this price range, but I from my point of view, the basic frame has some problems if it seeks to be a true all-rounder.

                                                  1 Reply Last reply
                                                  • Grathr Offline
                                                    Grathr
                                                    Posts: 7,683
                                                    Grathr Offline
                                                    Grathr
                                                    wrote on last edited by
                                                    #65 Quote Reply

                                                      @Steinar said:
                                                      Hi-jacking this thread back to Swiza stuff, although of course not really the original topic. (There has to be a limit to keeping on topic...)

                                                      Grathr graciously organized getting a couple of the aforementioned knives into Norway, and today I got my grubby hands on mine. Some quick impressions playing around with it follow.

                                                      I opted for the D03 in red. To those who feel those knives don't “deserve” to be red, I humbly disagree. The shade is totally different from those used by Victorinox anyway.

                                                      I wanted to like this knife, because it seems like a happy, little knife when you hold it. I expected to hate the blade lock, but the mechanism is easily inspectable, and if the soft scale somehow should break or become stiff (i.e. any obvious failure mode), you can still operate it. No lateral blade play, although it has the same behavior as 111 mm as it is more a slip-joint secured by a liner lock than a conventional liner lock. This causes, at least on my knife, it to be possible to push the blade a little closed when the knife is open before the lock stops it. That isn't something that annoys me, but I have noticed some people dislike it.

                                                      As others have noted, the spring on the can opener is softer than on any of the other tools in the knife. It's still stiff enough to be “OK”, but I would have preferred stiffer lock-up personally. I found it interesting that, as opposed to big brother Vic, they have a ground finish to parts of the tools, like the screwdrivers, instead of having everything polished. Time will tell whether this affects the stainless quality, as they have opted for a steel with a lot of chromium and not that much carbon. They have implied 440A, but if this is correct, I wonder if they have hardened the tools lower than the blade as they scratch ridiculously easily. (As posted by others.)

                                                      What really keeps it from occupying a place in my EDC rotation is easy to see from any photo: The “banana shape” of the open knife. This makes the knife similar to knives with designs from the world of small game hunting. For a knife design, the edge can effectively dip down, stay in line with, or move up and away from the center line of the handle. Many hunting knives dip down, but all-round knives should form a straight line (consider a Mora or a Vic) for optimal flexibility and the highest possible number of ways to hold and use the knife. The Swiza chooses to become better at some things and worse at others. What it becomes worse at, like whittling, is far more important to me than what it becomes better at. So whether the choice was for looks or use, it is not for me (as a general EDC knife).

                                                      The way the tools protrude a lot from the handle links up to the previous paragraph: It makes some ways of holding the knife uncomfortable, but for what I guess is the default way of holding the design, with the thumb resting on the tang, it is just fine.

                                                      Summary for first impressions: Very few brands get so much correct with their first offering in this price range, but I from my point of view, the basic frame has some problems if it seeks to be a true all-rounder.

                                                      I got to play a little with your D04 before sending it to you, and I was not a fan of the openers, the weak spring and the way they stick out of the handle.
                                                      IMO the D02 is a better executed tool.

                                                      Merit Badges
                                                      MTO Tool Airgun User EDCSource Buyer Photographer Camping Outdoor Cook Flashlight Fire Making Time Lord Level 2 Axe User EDC Pocket Dump Challenge Traditional Folder Challenge Mora User 30 Days and 30 SAKs Chainsaw User Buck 110 Challenge Buck User
                                                      1 Reply Last reply
                                                      • Steinar Offline
                                                        Steinar
                                                        Posts: 3,435
                                                        Steinar Offline
                                                        Steinar
                                                        wrote on last edited by
                                                        #66 Quote Reply

                                                          I somehow get the feeling the D01/02 was the knife they really designed, and then they started adding tools. Also, there is something a little “off” with how the tools are shaped, there no small details or acute angles. I guess it's a consequence of their manufacturing process.

                                                          Perhaps the designer team were stereotypical Francophones who do not drink beer. :D

                                                          1 Reply Last reply
                                                          • Etherealicer Offline
                                                            Etherealicer
                                                            Admin Team
                                                            Posts: 12,034
                                                            Etherealicer Offline
                                                            Etherealicer
                                                            Admin Team
                                                            wrote on last edited by Etherealicer
                                                            #67 Quote Reply

                                                              Last Friday afternoon, I sent pictures of mine to Swiza to inquire about warranty (I don't have the receipt anymore). Anyway, got a mail today, that I can send mine in and they will replace it. So far the warranty gets a thumb up from me :tu:

                                                              I also have a broken computer case I used for the following test.
                                                              When you tighten the screws hard the thread gets destroyed and the screw will turn freely. It takes some force but not that much and can easily be achieved with the large flat in straight position (no need to go to 90° for extra torque).
                                                              Anyway, both large flat on the Pioneer and on the Swiza destroyed the screw without any harm to either tool. So, the only tool I really like on the Swiza still holds his ground.

                                                              I then repeated the test with the small flat.


                                                              Needless to say, the screws were of cheap quality and suffered a bit too ;)


                                                              No sign of wear on the Pioneer, but the Swizas small flat is gone. It has both a chip and is deformed.

                                                              swiza_05.jpg

                                                              swiza_06.jpg

                                                              swiza_07.jpg

                                                              1 Reply Last reply
                                                              • AimlessWanderer Offline
                                                                AimlessWanderer
                                                                Posts: 17,518
                                                                AimlessWanderer Offline
                                                                AimlessWanderer
                                                                wrote on last edited by
                                                                #68 Quote Reply

                                                                  Sending it in because of the bent drivers, or something else?

                                                                  1 Reply Last reply
                                                                  • Etherealicer Offline
                                                                    Etherealicer
                                                                    Admin Team
                                                                    Posts: 12,034
                                                                    Etherealicer Offline
                                                                    Etherealicer
                                                                    Admin Team
                                                                    wrote on last edited by
                                                                    #69 Quote Reply

                                                                      @50ft-trad said:
                                                                      Sending it in because of the bent drivers, or something else?

                                                                      Dent in the scales (it is supposed to be dish-washer safe), abraded small flat and Phillips. They want to analyze the damage, it sounded like the are eager to improve their product, so that is good.

                                                                      1 Reply Last reply
                                                                      • Grathr Offline
                                                                        Grathr
                                                                        Posts: 7,683
                                                                        Grathr Offline
                                                                        Grathr
                                                                        wrote on last edited by
                                                                        #70 Quote Reply

                                                                          @Etherealicer said:

                                                                          @50ft-trad said:

                                                                          Sending it in because of the bent drivers, or something else?

                                                                          Dent in the scales (it is supposed to be dish-washer safe), abraded small flat and Phillips. They want to analyze the damage, it sounded like the are eager to improve their product, so that is good.

                                                                          That sounds promising.
                                                                          If they stand by their tools and warranty and improve the next generations, the Swizas can become very good tools. :tu:

                                                                          Merit Badges
                                                                          MTO Tool Airgun User EDCSource Buyer Photographer Camping Outdoor Cook Flashlight Fire Making Time Lord Level 2 Axe User EDC Pocket Dump Challenge Traditional Folder Challenge Mora User 30 Days and 30 SAKs Chainsaw User Buck 110 Challenge Buck User
                                                                          1 Reply Last reply
                                                                          • Etherealicer Offline
                                                                            Etherealicer
                                                                            Admin Team
                                                                            Posts: 12,034
                                                                            Etherealicer Offline
                                                                            Etherealicer
                                                                            Admin Team
                                                                            wrote on last edited by Etherealicer
                                                                            #71 Quote Reply

                                                                              Testing Spring strength (semi-scientific)

                                                                              Materials
                                                                              One cheap analog kitchen scale rated up to 3kg

                                                                              Method
                                                                              Holding the tool horizontally, I pressed the scale down with the tip of the implement, reading out what the highest pressure is that can be achieved. Readout was pretty easy and probably precise to 10/20g. Technically, that won't measure spring strength but spring strength in proportion to tool length (that is also what we are interested in). Measure was repeated several times to get a more representative result (slipping of was quite common :P)
                                                                              As I personally feel that gramm values are of no interest here I decided to normalize the result, setting the value I got for the Pioneer cap-lifter (1200 g) to 1.

                                                                              Result


                                                                              Tool

                                                                              Comment

                                                                              0.54

                                                                              D04

                                                                              Phillips

                                                                              **

                                                                              0.58

                                                                              Swiza

                                                                              Can opener

                                                                              **

                                                                              0.63

                                                                              CT29

                                                                              Cork-screw

                                                                              **

                                                                              0.63

                                                                              CT29

                                                                              Can opener

                                                                              **

                                                                              1.00

                                                                              Pioneer

                                                                              Can opener / Cap lifter

                                                                              Unsurprisingly can opener and cap lifter on the Pioneer got the same rating

                                                                              1.17

                                                                              CT29

                                                                              Bit-Holder

                                                                              Despite its length it has very good retention

                                                                              1.21

                                                                              D04

                                                                              Cap lifter

                                                                              Yay, in the category Swiza Tools the large flat remains champion

                                                                              1.29

                                                                              CT29

                                                                              Cap lifter

                                                                              **

                                                                              Discussion
                                                                              We can easy see that the can-opener on the Swiza has a much weaker retention than the can-opener on the Pioneer. It is however only a slight difference to the can-opener on the CT. Personally, I would have thought the difference can-opener Swiza vs. CT would be larger. This makes me believe that to some parts the geometry of the tool works against the Swiza at least for me (I'm a lot more comfortable with the CT's can-opener when using it as a screw-driver). It is well possible that others will have less of a problem.

                                                                              Conclusion
                                                                              I still think it was an oversight to make the back-spring on the can-opener this weak but the perceived weakness is at least partially individual (how well you cope with the Swizas curved design I presume).

                                                                              1 Reply Last reply
                                                                              • Etherealicer Offline
                                                                                Etherealicer
                                                                                Admin Team
                                                                                Posts: 12,034
                                                                                Etherealicer Offline
                                                                                Etherealicer
                                                                                Admin Team
                                                                                wrote on last edited by
                                                                                #72 Quote Reply

                                                                                  @Grathr said:

                                                                                  @Etherealicer said:

                                                                                  @50ft-trad said:

                                                                                  Sending it in because of the bent drivers, or something else?

                                                                                  Dent in the scales (it is supposed to be dish-washer safe), abraded small flat and Phillips. They want to analyze the damage, it sounded like the are eager to improve their product, so that is good.

                                                                                  That sounds promising.
                                                                                  If they stand by their tools and warranty and improve the next generations, the Swizas can become very good tools. :tu:

                                                                                  Well, there are two kinds of issues (for me).

                                                                                  Tool quality: I'm really disappointed in the small flat, that should be rather easy remedied.
                                                                                  Ergonomics: The curved frame / sticking out tools were purposefully designed like this to easy open the tools. However, it makes it uncomfortable to grip the tool. I don't think this can be solved without re-designing / re-thinking the frame.

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 3
                                                                                  • 4
                                                                                  • 5
                                                                                  • 6
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. Swiss Army Knights Forum
                                                                                  4. Swiza D04 - thoughts after 10 days of use
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0