Let's see your monoculars
-
Here's my mobile pier in its first stages....
Braked swivel castors will go under the steel channel. Lugs will be welded onto the brace bars ready for screw jacks to be made and fitted.
Also the main pier will be braced off the base.I'm undecided on the Top section. Most simply use 2 steel plates seperated by 4 threaded bars to allow access to remove the scope mount. I've simply cut an additional piece the same width as the 120mm box section. I'm not convinced, so I'll weld up the base and work out the top when I get there.
Wish me luck!


-
Good luck!
Wouldn't a tubular pier have less vibrations?
That Towa must be a planet killer. -
@kkokkolis said:
Good luck!
Wouldn't a tubular pier have less vibrations?
That Towa must be a planet killer.Why would that be?
I didn't have a choice - it was just scrap steel they were throwing at work - so I asked if I could have it.We do have some heavy steel tube, but there is little if any wastage. Like most companies today - stock is purchased with minimal wastage.I'm starting to wonder now if the square box section will work or not. I considered filling it with sand to dampen any vibrations.
-
Dry sand or lead pellets. Wait, it will be unliftable. Dry sand is OK.
They also use a kind of foam (polystyrene?) that hardens as a rock but is very lightweight. -
You'll see two more incoming monoculars soon. Both are very interesting, the German is vintage and very flexible and the Japanese is promising.
I don't remember the last time I bought a SAK.
-
@kkokkolis said:
You'll see two more incoming monoculars soon. Both are very interesting, the German is vintage and very flexible and the Japanese is promising.I don't remember the last time I bought a SAK.
Looking forward to seeing these when they arrive. I'm like you, I haven't bought hardly any MT's or SAKs for the past few months.
My mobile pier is coming on......slowly

After you mentioned the vibration issue I decided to brace the entire post. Plus add extra large screw jacks for stability as well as the castors when they arrive. The reason it's taking so long is partly due to my work place getting fed up with me constantly asking for more materials

Good new is I think I've now got all my steel bits. Just done a dry fit to check if there's anything glariously missing before I start welding it together.
I'm going to paint it Off White when it's finally completed.
-
Now it looks firm like a Sumo wrestler.
-
I received today my tiny original Arthur Siebert EMOscop!
The attached pic is from eBay but that's the one I bought pictured there. I'm going to take new pics soon.
The two other pics are from submin.comFor your understanding, I quote http://www.submin.com. Both **Gerald **from submin.com and **Urlich **from http://www.monocular.info/ helped me with my purchase of this special vintage optic (now discontinued and alive as a Haverhills Chinese copy).

EMO-OPTIK Arthur Seibert Emoskop
The Emoskop is a combined telescope, magnifier and microscope only 42mm long in a close fitting cylindrical leather case (in brown or black).
Arthur Seibert ( 1906- 1980) was Ernst Leitz lens designer from 1920 to 1947. In 1948 Seibert left Leitz and undertook the task of designing a subminiature lens for the Minox camera. Arthur Seibert was a great optics designer, his most famous designs were the five element Pentar lens of Minox II and the COMPLAN lens for Minox III/IIIs/B, and early Minox C. The Pentar and COMPLAN are still two of the sharpest subminiature lens-- in fact the sharpest of any commercial photographic lens”.
In 1951, Arthur Seibert formed his own optics company, EMO-OPTIK in Wetzlar, West Germany. Many EMO's products are masterpieces of optical design, for example:
Highly corrected EMO Wetzlar 5x Macromax loupe
Emoskop : this marvel is a telescope, a microscope and three magnifier in a pocket package only 50mm long. It is the optical equivalent of a Swiss Army knife.
Octoskop : A combination loupe with eight magnifications: 2x 4x 6x 10 x 14x 18x 20x 28 x .
An Emoskop in an all plastic construction has been made in China. Some Emoskops came with an accessory stand for use as a microscope.The three parts are combined to give a telescope of 2.5x, magnifications of 5x, 10x,15x and a microscope of 25x and 30x.
The top and middle pieces (see photograph above) are combined to give an adjustable 2.5x telescope.
The middle piece is a 5x magnifier.
The bottom piece (far right) is a 10x magnifier.
Middle and bottom combine to give 15x magnification.
All three combine to give 25x microscope. By pulling the ocular out of the objective tube magnifications between 25x and 30x can be obtained. The ocular is itself a x5 magnifier when viewed through the tube.
When used as a microscope the working distance is 24mm from the object.
25x 42mm
30x 57mm
When used as a telescope 2.5x/teleloupe 3xInfinity 34mm
30cm 50mm
When used as a Loupe5x 25mm
10x 9mm
15x 32mm

-
A really amazing instrument!!!

-
Love the the leather case!
JR -
This is my Emoscop, with similar optics and MTO coin for reference. See how small it is? It is very sharp and capable for its size though. 3x for a monocular seems little but it isn't, since I use it for things I can see but I can't focus on in order to read letters on them. As a microscope or loupe on the other hand it is unbeatable. Apparent field of view is restricted, about 30 degrees (it is Galillean after all) but true field of view is about 10 degrees, so you can see 10 degrees with your central vision (high resolution) and it cuts all peripheral vision, but you have the other eye for that, if you keep it open. And all that from an optic the size of a thimble, designed from an man who worked for Leitz (Leica) and Minox (the spy cameras of the vintage espionage films) and made in Wetzlar, Germany.
My case specimen is made from black leather, with the patina of time but still functional and adorable.Belomo triplet loupe and Docter monocular are designed by Zeiss, perhaps in the same city of optics, Wetzlar, but built in former Zeiss factories in Jena and Minsk. Belomo still makes lenses for Zeiss microscopes, if that says something. The best part is that these optics, because of their size, can be EDCed and cost much less than standard apperture optics from the same manufacturers. Emoscop has an aperture of 18mm as a monocular (standard sizes are 16-21mm) and 13mm as a microscop. Used with a gigher magnification loupe it provides more microscopic magnification. So a 20x loupe would give 50x-60x. But my experience says, 5x for nature, 10x for gems, 15-30x for artifacts (money, stamps etc). It covers them all!

-


This is the Opticron Gallery Scope 8x20.
It is bigger than the Docter and close to its optical quality, with just a little more field if view and eye relief. What's nice with that scope is its extreme close focus without the need for an additional lens. It goes down to 30cm. There is an additional 3x lens though, integrated to a transparent skirt that converts it to a 24x field microscope. Overall I find the Docter more charming but this could be a beater scope (not that it is a cheap one) that can be used faster (thus without a case, although it came with a case. Even myself I find EDCing 3 monoculars (and a binocular) a little over the top, so I have to choose which one would be more useful.
The fact is that none of these has the great eye relief and ease of use of the Zeiss 6x18 a friend has. All three together cost less than the Zeiss. -
Gosh KK, you have really superlative optics my friend!!!
The vintage stuff is so awesome! -
I like optics. I could say that according to a hypothetical Brechtian Glaskauf, optics are not just glass. They give the man what wings or snorkels give, a superhuman power to exceed his limits.
-
@kkokkolis said:
This is my Emoscop, with similar optics and MTO coin for reference. See how small it is? It is very sharp and capable for its size though. 3x for a monocular seems little but it isn't, since I use it for things I can see but I can't focus on in order to read letters on them. As a microscope or loupe on the other hand it is unbeatable. Apparent field of view is restricted, about 30 degrees (it is Galillean after all) but true field of view is about 10 degrees, so you can see 10 degrees with your central vision (high resolution) and it cuts all peripheral vision, but you have the other eye for that, if you keep it open. And all that from an optic the size of a thimble, designed from an man who worked for Leitz (Leica) and Minox (the spy cameras of the vintage espionage films) and made in Wetzlar, Germany.
My case specimen is made from black leather, with the patina of time but still functional and adorable.Hmmm, when I go on MTo I expect to be tempted by multtools, but now I have just purchased an (I think) original Emoskop "EMO Seibert Wetzlar" (as if I didn't know already, MTo and eBay is a dangerous combination
), so I guess I'll see what I think of it when it arrives from the US :D -
It is an optical multitool. You can check your knives condition with that.
-
Congratulations kkokkolis, that opticron is lovely. I think it's the same model as mine - I can't check because all mine are back in the loft......my wardrobe is full...........of multi tools

But I'm pretty certain that when I received mine (I'm sure it was this model
) the "View" wasn't quite right. So decided to remove the whole optical train and clean them :ahhh
It was then that I noticed two convex lenses facing each other. I remembered a little about optical light paths through convex and concave lenses. So decided to try a different sequence.After reassembly I peered through and was simply blown away by the detail. Mine has a ridiculous short focus and the clarity....so sharp it almost a cuts your eyeballs.
Without a doubt optics are just as adictive as MT's in my view.
-
According to your pics it is the same. I also received the same brown pouch with it.
-

A gentleman's choice, a real alpha, Leica Ultravid 8x20.
-
So I would love to get a monocular. What is a good model that will not break the bank.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


