Swiza D04 - thoughts after 10 days of use
-
I'm not Swiss, but I can use DuckDuckGo:
From the website of Swiss Federal Institute of Intellectual Property:
Owning a patent gives you the exclusive right to prevent others from commercially using your invention for up to 20 years. During this period you can prohibit others from using it - i.e., producing, using, selling or importing - without your permission.
I think these things are pretty much standardized through international treaties for most of the OECD.
-
@Steinar said:
I'm not Swiss, but I can use DuckDuckGo:From the website of Swiss Federal Institute of Intellectual Property:
Owning a patent gives you the exclusive right to prevent others from commercially using your invention for up to 20 years. During this period you can prohibit others from using it - i.e., producing, using, selling or importing - without your permission.
I think these things are pretty much standardized through international treaties for most of the OECD.
Thank you Steinar!!!

-
@Steinar said:
I'm not Swiss, but I can use DuckDuckGo:From the website of Swiss Federal Institute of Intellectual Property:
Owning a patent gives you the exclusive right to prevent others from commercially using your invention for up to 20 years. During this period you can prohibit others from using it - i.e., producing, using, selling or importing - without your permission.
I think these things are pretty much standardized through international treaties for most of the OECD.
Well if thats the case, the small wenger scissors are up for grabs (inrroduced in 1972 according to SAK wiki) not sure on the large ones, but its pretty close to being up soon as the original ranger series was introduced in the 90's. Make it happen Swiza!
-
Hi,
there is a hole/gap in the spring for the can opener. What do you
mean any chance to use this (keyring or anything else)?Hi, I just received my D04 and I'm curious about this hole/gap as well. Anyone knows what it is for? I'm kinda hoping that it is for the option of adding on a keyring
It looks too much like a hidden feature to me so I doubt that's the case.
Maybe it was meant for toothpick storage :D
If that is the case I may have to consider one of these as well, but not until they add decent scissors.
BTW, Swiza, if you are reading this (I sure hope so) I want Wenger Ranger style scissors, or at least Wenger 85mm style. Please dont do the easily broken Vic sytle spring.
Sincerely,
sLaughterMedScissors a must. Don't care which sty;e, but, if Wenger style: smooth not serrated and no bounce up and down.
-
I shouldn't think there'd be too much problem modelling scissors on the Wenger style, after all, the Leatherman Juice scissors have used essentially the same approach
-
[quote author=Storky link=topic=62906.msg1178206#msg1178206 date=1446797703]
Hi,there is a hole/gap in the spring for the can opener. What do you
mean any chance to use this (keyring or anything else)?Hi, I just received my D04 and I'm curious about this hole/gap as well. Anyone knows what it is for? I'm kinda hoping that it is for the option of adding on a keyring
It looks too much like a hidden feature to me so I doubt that's the case.
Maybe it was meant for toothpick storage :D
If that is the case I may have to consider one of these as well, but not until they add decent scissors.
BTW, Swiza, if you are reading this (I sure hope so) I want Wenger Ranger style scissors, or at least Wenger 85mm style. Please dont do the easily broken Vic sytle spring.
Sincerely,
sLaughterMedScissors a must. Don't care which sty;e, but, if Wenger style: smooth not serrated and no bounce up and down.
[/quote]The up and down movement is an inherant trait to Wenger-style scissors. Really no way around it. I don't mind it, once you're used to it you don't notice.
-
@Patent Law
Actually, for a patent to work it must/can be registered in different places.
National - Works for the country you register your product in (lots of countries recognize other nations copyright law, so it is also effective in those countries).
International - Recognized in all countries that have signed the international copyright contract (making individual contracts between countries obsolete). As far as I recall both the USA and China (and probably more) have not signed those contracts that is why most companies have an US patent AND an international one.As for the scissors in particular, Böker uses the exact same style on their scissors, so either that style is not patetented, or the patent has run out.
-
@Etherealicer said:
Last Friday afternoon, I sent pictures of mine to Swiza to inquire about warranty (I don't have the receipt anymore). Anyway, got a mail today, that I can send mine in and they will replace it. So far the warranty gets a thumb up from me
I also have a broken computer case I used for the following test.
When you tighten the screws hard the thread gets destroyed and the screw will turn freely. It takes some force but not that much and can easily be achieved with the large flat in straight position (no need to go to 90° for extra torque).
Anyway, both large flat on the Pioneer and on the Swiza destroyed the screw without any harm to either tool. So, the only tool I really like on the Swiza still holds his ground.I then repeated the test with the small flat.
Needless to say, the screws were of cheap quality and suffered a bit too ;)
No sign of wear on the Pioneer, but the Swizas small flat is gone. It has both a chip and is deformed.Vic parts will bend too, but it takes quite alot of force.
Id love to take apart a swiza and do a destructive test on the parts, and compare contrast with vic parts. >:D
-
Last Friday afternoon, I sent pictures of mine to Swiza to inquire about warranty (I don't have the receipt anymore). Anyway, got a mail today, that I can send mine in and they will replace it. So far the warranty gets a thumb up from me

I also have a broken computer case I used for the following test.
When you tighten the screws hard the thread gets destroyed and the screw will turn freely. It takes some force but not that much and can easily be achieved with the large flat in straight position (no need to go to 90° for extra torque).
Anyway, both large flat on the Pioneer and on the Swiza destroyed the screw without any harm to either tool. So, the only tool I really like on the Swiza still holds his ground.I then repeated the test with the small flat.
Needless to say, the screws were of cheap quality and suffered a bit too ;)
No sign of wear on the Pioneer, but the Swizas small flat is gone. It has both a chip and is deformed.Vic parts will bend too, but it takes quite alot of force.
Id love to take apart a swiza and do a destructive test on the parts, and compare contrast with vic parts. >:D
With pics!!!!! >:D >:D >:D
-
Last Friday afternoon, I sent pictures of mine to Swiza to inquire about warranty (I don't have the receipt anymore). Anyway, got a mail today, that I can send mine in and they will replace it. So far the warranty gets a thumb up from me

I also have a broken computer case I used for the following test.
When you tighten the screws hard the thread gets destroyed and the screw will turn freely. It takes some force but not that much and can easily be achieved with the large flat in straight position (no need to go to 90° for extra torque).
Anyway, both large flat on the Pioneer and on the Swiza destroyed the screw without any harm to either tool. So, the only tool I really like on the Swiza still holds his ground.I then repeated the test with the small flat.
Needless to say, the screws were of cheap quality and suffered a bit too ;)
No sign of wear on the Pioneer, but the Swizas small flat is gone. It has both a chip and is deformed.Vic parts will bend too, but it takes quite alot of force.
Id love to take apart a swiza and do a destructive test on the parts, and compare contrast with vic parts. >:D
With pics!!!!! >:D >:D >:D
I want to see that!

-
Last Friday afternoon, I sent pictures of mine to Swiza to inquire about warranty (I don't have the receipt anymore). Anyway, got a mail today, that I can send mine in and they will replace it. So far the warranty gets a thumb up from me

I also have a broken computer case I used for the following test.
When you tighten the screws hard the thread gets destroyed and the screw will turn freely. It takes some force but not that much and can easily be achieved with the large flat in straight position (no need to go to 90° for extra torque).
Anyway, both large flat on the Pioneer and on the Swiza destroyed the screw without any harm to either tool. So, the only tool I really like on the Swiza still holds his ground.I then repeated the test with the small flat.
Needless to say, the screws were of cheap quality and suffered a bit too ;)
No sign of wear on the Pioneer, but the Swizas small flat is gone. It has both a chip and is deformed.Vic parts will bend too, but it takes quite alot of force.
Id love to take apart a swiza and do a destructive test on the parts, and compare contrast with vic parts. >:D
Everything can be broken, but in my test there was an upper force limit as the weakest part (threads of the screws) broke. That ensured that the Swiza was not treated unfairly or with more force than the Vic.
So, Vic showing no wear and Swiza in rough shape* paints a pretty dooming picture for the newcomer.I will repeat the test once I get the replacement, then I will send it off to you so you can do more tests.
- Sure the Swiza was not fresh before, but the Vic has seen more use so the comparison seems fair.
-
The Pioneer is a lot more heavy duty than the standard cellidor line of SAKs with thicker tools and use harder back springs.
Maybe a more 1:1 comparison is the cellidor models. The Pioneer is based on a military spec and use model. -
-
@jerseydevil said:
The up and down movement is an inherant trait to Wenger-style scissors. Really no way around it. I don't mind it, once you're used to it you don't notice.The Leatherman Juice scissors use a very similar mechanism but don't have the bounce, by virtue of having two backsprings instead of one.
-
The up and down movement is an inherant trait to Wenger-style scissors. Really no way around it. I don't mind it, once you're used to it you don't notice.
The Leatherman Juice scissors use a very similar mechanism but don't have the bounce, by virtue of having two backsprings instead of one.
Congrats. You just made me want to buy a Juice :D
-
Its back :D
Test (can-opener vs. Phillips screw on PC case until thread breaks) is scheduled for the weekend.

-
My thoughts exactly...
So I didn't finish the test (stopped before breaking the thread). Why? Because before that the screw took a bite out of it (its also bent but that you can only see by eye not on the picture)... sorry Thomas, seems you get a broken tool

BEFORE:
AFTER:


-
Just to give you an idea how little force this took...
I tried to do it with a classic SD. I couldn't break the thread either because I didn't get enough grip BUT the SD did not take any damage...
I will test some more tools and post pictures

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
