I mod everything
-
After a discussion with lowtech, I decided to try and acid etch my g-shock clasp. That did not work lol. But I have been using some new tough spray. Truck bed coating. This stuff has been holding up well on everything I have sprayed it on, so I figured why not try it. Sorry I don't have a pic of the acid test but it just made it dull was all.
Here's a stock clasp

And the black sprayed one

It's supposed to dry 72 hours to achieve best results.
-
If nothing else, the acid will have prepped the surface so teh paint should adhere well. They seem to use highly corrosion resistant steel if an acid bath does nothing.
-
Well that coating did not work, so on to the next one. This time I used epoxy paint that is used on appliances followed by some matte clear coat. This stuff has to dry for 3-5 days. Will update when I can.
Edit: I sandblasted each piece this time to insure a solid finish.
-
-
I would guess that those are made of aluminum. Aluminum won't turn dark with acid etching, it will eat away a small amount of the surface.
Interesting that the truck bed liner didn't work on it. What else have you used that stuff on?
-
@Flint Hills said:
I would guess that those are made of aluminum. Aluminum won't turn dark with acid etching, it will eat away a small amount of the surface.Interesting that the truck bed liner didn't work on it. What else have you used that stuff on?
The clasps are definetely Stainless steel, not aluminium.
-
Stainless steel and rostfri are hard to get anything stay on their surface. Paint usually just chips away, chemicals hardly do anything to them. But you might want to try fire on them. Specially very different degrees from candle flame to blowtorch. Then dipping in alcohol might give different solution compared to dipping in oil.
-
Some other things I've done. Zebra shorties and a stylus shortie

This one for size reference

-
Would you mind going in detail on how to shorten a pen like that?

-
@lowtech said:
Would you mind going in detail on how to shorten a pen like that?
Not at all. I don't mind
It actually very easy.
Take the whole thing apart to start.
Screw the tip back on slightly to push the plastic insert out of the pen.
Figure out how short you want it.
Cut the middle of the plastic insert in half, then remove equal amounts from both sides.
Example: if you want it one inch shorter remove 1/2 from each side, that is important.
Then cut the top of the steel sleeve off the same amount. Do not cut the part where the tip is!
Push the threaded plastic end (tip) all the way in and thread the tip back on.
Then insert the top part. You can glue or weld the 2 pieces of plastic together before hand if you can. I used a solder iron to melt it together.
The trick is to cut the pen refill off the same way. Reinstall everything and there you go.
I have some spare parts in my shop and I will try to get some pics. -
That World bei nice! Although i don't real need yet another modding Addition beides bikes, tools, watches, packst . . .
-
Here's some pics.


The tip as described is the knurled portion and the smaller end on the plastic. The reason we must save these is that there is threaded portion in these parts.
-
@lowtech said:
That World bei nice! Although i don't real need yet another modding Addition beides bikes, tools, watches, packst . . .I could make you a set if you want some. Just finding the pen is the fun part. I have also done this to the pencil which is actually in the photo (the black one,who knew)
-
Very cool mods on those pens and pencils! The Zebra f701 is my favorite. I need to make a matching pencil for mine. I've done the mod to swap the click mechanism and clip from a f402, gives it a cleaner look and makes it all metal (at least the outside). I've had the Fisher Space pen refills in them but now I have fit a Zebra g301 gel refill in and love that.
-
I shure would like a set, but I don´t want to produce any stress on your side. Might you be interested in a trade of any kind maybe?
-
I guess I´ll have to wait and see... :D
-
Update to the watch clasp. The black epoxy paint with clear lacquer over top is holding up extremely well. I'll get pics soon. So far it's been on a week and while working and it's hasn't came off yet.
-
After this its on to the watch case. I plan on darkening this piece

I have 2 cases just in case it breaks or doesn't work.
-
And another slim juice is born. This one has a new scale material.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

