WoodsDuck's December Surge Challenge Thread. Mundanity, ho!
-
[quote author=zoidberg link=topic=63424.msg1201753#msg1201753 date=1450912542]
NICE!
Where did you find the older blunt nose head?Got them both off ebay. I actually bought them for parts, because they both have a broken implement and I want to mod my other tools. I have a Pro Scout coming in the mail too, so I'm thinking I'll swap out the combo blade on that one for a serrated blade, then put BN pliers on it. And I'm going to see if the file off a 600 will fit in the spot where the 400's blade is so I can have a bladeless tool. It looks like the file "tang" is thinner than the blade, but I'm hoping an extra washer or two can make it work.
Of course I can't do anything until the spanner I ordered arrives.
You don't have to wait, just use pliers on the donor handle then use the handle as the spanner.
The MP400 is set up slightly different to the MP600, I'm sure you'll see what I meant when you play with it.
Edit: my 17th K post. :ahhh
By the way, I have had almost no luck using pliers to do the job. I've gotten the screw to turn a couple mm, but most I've just damaged it.
Heat it up with a lighter to break the loctite... ;)
[/quote]Actually, I had been doing that. But I think it wasn't getting heated enough since I was afraid of damaging the darn plastic lock release, because I really blasted it with the lighter and it finally came loose

Thanks for the tip about using the handle as a spanner though, I see what you mean and that is just crazy helpful.
-
[quote author=WoodsDuck link=topic=63424.msg1201757#msg1201757 date=1450912871]
[quote author=zoidberg link=topic=63424.msg1201753#msg1201753 date=1450912542]
NICE!
Where did you find the older blunt nose head?Got them both off ebay. I actually bought them for parts, because they both have a broken implement and I want to mod my other tools. I have a Pro Scout coming in the mail too, so I'm thinking I'll swap out the combo blade on that one for a serrated blade, then put BN pliers on it. And I'm going to see if the file off a 600 will fit in the spot where the 400's blade is so I can have a bladeless tool. It looks like the file "tang" is thinner than the blade, but I'm hoping an extra washer or two can make it work.
Of course I can't do anything until the spanner I ordered arrives.
You don't have to wait, just use pliers on the donor handle then use the handle as the spanner.
The MP400 is set up slightly different to the MP600, I'm sure you'll see what I meant when you play with it.
Edit: my 17th K post. :ahhh
By the way, I have had almost no luck using pliers to do the job. I've gotten the screw to turn a couple mm, but most I've just damaged it.
Heat it up with a lighter to break the loctite... ;)
[/quote]Actually, I had been doing that. But I think it wasn't getting heated enough since I was afraid of damaging the darn plastic lock release, because I really blasted it with the lighter and it finally came loose

Thanks for the tip about using the handle as a spanner though, I see what you mean and that is just crazy helpful.
[/quote]You can pop the springs off the plastic bits too, makes it a little easier to keep them out of the way.

-
Day 24-
Merry Christmas MTO!

I expect a lot of us will put our Surges to work the next couple days opening gifts and preparing food

I'm the guy in my family people usually turn to for a knife, so mine is likely to get passed around a bit.
For my pic today, here's a shot of the Surge with my walking stick;

-
On second thought, maybe I'll bring the Dime to pass around. Don't want anyone dropping a Surge, blade extended, on their foot or anything

-
Day 25-
Merry Christmas (again)!
Long day, but I managed to grab a shot of the Surge with some of my gifts.
Not the laptop though, that was a gift I bought for someone else.
-
A one piece lobster tool?

-
A one piece lobster tool?

That's Tiny Sting, by NexTool. Technically it's a scorpion, but with a little imagination...
Doh!!

-
Day 26-
This package arrived ahead of schedule. Gerber MP600 Pro Scout, with bit kit;

-
Day 27-
We're in the home stretch now!
Today I made an attempt at modding my Pro Scout;

I had also planned to use the NN pliers that came with it to build another MP600 from the remaining parts, but they're quite stiff. I'm going to try a few things to loosen them up, but oil and quite a bit of opening and closing have only had a very limited effect.
-
Nice!

-
Day 28-
The rain just won't stop. No outdoor fun for me


-
Day 29-
So I've been doing challenges for almost two months, and in that time have received three issues of this magazine;

-
Day 30-
Geez, already??
Today the Surge helped me open a couple late Christmas gifts


-
Great thread mate, badge awarded!
Obi might cry if you don't post a day 31 pic though.
;) -
Lol.

-
Day 31-
I made it!

It's hard to say anything original about a tool as well known as the Surge, but I'll go ahead and toss in my 2 pennies;
It's a really good tool. We all know the facts about Leatherman's declining quality control over the years, but my personal example of the Surge is absolutely top notch. The blades came sharp, the lockup is solid. All the implements operate smoothly. My favorite features have to be the scissors, which are tough as nails on top of being outside accessible, and the serrated blade, which is big, super aggressive and does its job effortlessly. The Surge is huge, no doubt about that. Its weight is hard to ignore. For this reason it spends more time in my pack than on my belt. But for that weight you get a lot of functionality, and the tool feels nearly indestructible. Mine saw some use as a crude hammer through the month with no ill effects. I also may have dropped it a few times...As a guy with just slightly above average size (at most) hands, the Surge is almost too big, but not quite. The size is something to be aware of when considering a purchase. I would definitely recommend finding a way to fondle one before you pull the trigger, as it's a fairly expensive MT.
Moving forward, the Surge will definitely remain in my MT rotation, despite its bulk. The features are just nearly perfect for my needs.
I had a good time following everyone's threads this month. We really have a diverse group here, and it's fun to see how people different from myself go about their day and make use of their MTs.
Once again I want to thank everyone who took the time to read my dull posts, and especially our gracious hosts Obi and MTO for making this all possible.
For my final crappy photo (in this thread anyway) the Surge posed with something special (to me); my first real gun, given to me by my father many years ago.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

