CyberTool owners thread
-
[quote author=Smaug link=topic=50953.msg1144611#msg1144611 date=1441048623]
The bit driver's Phillips is far superior to the traditional inline Phillips already. (hardened bit and longer reach)While I can appreciate the benefits of the bit driver, the one thing that has kept me from buying a Cybertool to replace my SAK with inline phillips is that I seem to run into a lot of recessed phillips screws. At a trade show this last March I had to put the base on a flat screen monitor, while the inline phillips worked fine, I doubt I would have been able to get the bit driver into the recess. Also the inside door handle on my car was getting loose and squeaky over bumps :ahhh and once again I doubt the bit driver would have been able to get in there.
Still may have to get a Cybertool if only for the fiddle factor :)
What it had both......
SC XLT

This retired my CT41/34's into my collection box.
I am also a fan of having both
EXCELLENT!!!!
Lacks only a spatula and fishscaler....(so folks can complain about something) :D
[/quote]You trade me your XLT and I will have all that stuff.
-
This is sorta my grail. Cross-compatibility between 1/4" and 4mm bit (both ways). :D
Not sure how much I'm really going to be using that, the CT does cover most of my screw-driver needs. Still, love the versatility and options it offers me.Just to clarify, the SwissTool Bit-Wrench holds a CT bit ;)

-
@Etherealicer said:
This is sorta my grail. Cross-compatibility between 1/4" and 4mm bit (both ways). :D
Not sure how much I'm really going to be using that, the CT does cover most of my screw-driver needs. Still, love the versatility and options it offers me.Just to clarify, the SwissTool Bit-Wrench holds a CT bit ;)
I'm looking for a similar converter. I wish there were a 5mm Allen wrench bit for the CT driver.

-
@Mr. Whippy said:
This is sorta my grail. Cross-compatibility between 1/4" and 4mm bit (both ways). :D
Not sure how much I'm really going to be using that, the CT does cover most of my screw-driver needs. Still, love the versatility and options it offers me.Just to clarify, the SwissTool Bit-Wrench holds a CT bit ;)
I'm looking for a similar converter. I wish there were a 5mm Allen wrench bit for the CT driver.

That is what I use

See here
-
Received my first CT yesterday, a CT34.

Sent from my XT1563 using Tapatalk
-
I should have a "like new" CT41 showing up by the end of the week! Got it for a great price so can't wait to see it.
I might want to have a mod done to it to add the inline philips and mag lens layer! Then it would be complete for me anyway!
The bit driver's Phillips is far superior to the traditional inline Phillips already. (hardened bit and longer reach) So if you're going to have a mod done, add the magnifier and LED light. ;)...
That would be a Cybertool Lite, wouldn't it?
-
I should have a "like new" CT41 showing up by the end of the week! Got it for a great price so can't wait to see it.
I might want to have a mod done to it to add the inline philips and mag lens layer! Then it would be complete for me anyway!
The bit driver's Phillips is far superior to the traditional inline Phillips already. (hardened bit and longer reach) So if you're going to have a mod done, add the magnifier and LED light. ;)...
That would be a Cybertool Lite, wouldn't it?
Nope.
CT Lite does not have saw and file.
-
Just ordered myself a CT34. Looked like it would complement my Leatherman Surge (which I would certainly not fancy dropping on a motherboard etc. if I slipped up). Plus its a legal carry in the UK without needing a "valid reason."
-
Finally got one as a present after never pulling the trigger on a CT:

-
Finally got one as a present after never pulling the trigger on a CT:

Love some CT with translucent red.
The translucent goes well with the 'cyber' - hints at modded computer hardware.
-
Some more pics of my modded "Cybertool 36" - CT34 with pliers removed, and metal file / back-side small screwdriver layer added. With a CT41 for size comparison. It's only about 2mm thinner than a CT34, and around 15-20g lighter, but I think it's a worthwhile saving and I find it more pocketable.



-
-
Better pic of the 125th Anny Cybertool......

-
Got a 34. Now I want a 41.


-
Do y'all find the supplied bits useful? I'm very tempted by the concept but don't find myself needing such small bits often when I'm not at my workbench, where I have more traditional "jeweller's" and precision tools for the #00 type screws for modem cases, etc. I can't recall the last time I needed hex / Allen bits under 3mm for example.
I'd expect to get limited use out of these three 'standard' bits (in descending order):
-
bit Phillips 0 / bit Phillips 1 (or Pozidrive)
-
bit Hex 4 mm / bit Torx 8
-
bit Torx 10 / bit Torx 15
And would consider adding the following as a spare from the XAVT:
- bit Hex 2 mm / bit Hex 2,5 mm (Inbus)
Because I'd expect the standard tools to be OK for what I might use the 'removed' PH2 / 4mm flat bit for. I can't find the XAVT 3mm / 4mm bit as a spare, which I might add instead.
What I'm hoping is that someone will point me towards a range of 4mm shank bits such as iPhone pentalobe or something else useful on the move.
Otherwise, despite the inner tug, I might have to exclude that layer from my next SAK. Or keep it as a pub-talk feature rather than a practical one :-.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login








