The SwissTool owners club
-
Finished touching up the RS I recently got. It's got a good heft to it, especially when working with it.
It's either I haven't sharpened the PE blade properly or I shouldn't expect it to be as razor sharp as say, a LM Sidekick blade?
It should get razor sharp. ;)
Got it! Thanks!
Had to do a few more swipes with the sharpener and I think I may have gotten it right already!
It won't get as razor sharp as a Leatherman blade unless you re-grind the primary bevel. Leatherman uses a much shallower primary bevel angle, which I then put a 40° secondary (working) bevel on. It's very easy with Leatherman. Not hard with Vic, but not as easy as with LM.
Wow, that does make a lot of sense. I guess the most I can sharpen the PE blade is equal to how a Rebar's PE blade is.
-
If there's another thing I learned from all of this, it's to use the flathead as the pry tool instead of the PE blade. One may argue that the knife blade can get into tighter areas but then there's the chisel- easier to maintain and as good as a follow thru as a flathead.
Currently using it to fix a defective light switch by the landing at the stairs.
-
Hi!
I'm here playing with my SwissTool RS and notice it's difficult to get the blade out due to how far it is recessed. No idea if it has always been this way or not - as I just cut my nails short (using the scissors on it, of course).
Follow SwissTool connoisseurs, is this normal? Picture attached for context :)

-
Mine's like that too.
-
Not sure if I ever joined this club...
I have 3. 1 in BO and in transit and 2 in SS.
Here's a shot of one of my SS ones with some friends.
-
Just in....
-
I carried the Swisstool Spirit for a long time last summer and used for small in-house-repairs tool. But it seems that there is some loosening on each of the tools, as well as on the pliers. I will have to send it in for replacing the philipsheadscrewdriver and tightening the whole tool.

It sucks somehow as it seems be very well put together; the finish is just superb for a MT. No big use for me for the tool right now. I really have to send it in.
-
@Humppa said:
I carried the Swisstool Spirit for a long time last summer and used for small in-house-repairs tool. But it seems that there is some loosening on each of the tools, as well as on the pliers. I will have to send it in for replacing the philipsheadscrewdriver and tightening the whole tool.

It sucks somehow as it seems be very well put together; the finish is just superb for a MT. No big use for me for the tool right now. I really have to send it in.
Wow Andi!! That's really unusual for one to do that. :o
-
Yes, unusual indeed.
And I doubt that it was due to some hard use. The philipshead on mine was rather soft steel and showed some wear even after some tightened srews. As I said, I doubt I tourqued too hard. The whole tool seems to rattle like cow-tail (as we use to say here).
Maybe I can get it back well repaired and it will last forever that way. But I suspect that I only got a monday´s tool.

-
threads still going after almost 6 years.

-
Join with spirit that updated to plus set

-
I highly regret spending $50 for a new LM Skeletool with Christmas money, when I could (and should) have gotten a used SwissTool for the exact same price or a little less. The SwissTool seems even heavier duty and better built than the LM Super Tools. The Skeletool, on the other hand, has some of the wimpiest pliers I've seen on a full-sized multitool. Mine's went into the closet in the collection box, and I'm back to using my nearly 20 year old LM PSTII. The Skeletool is meant for those who probably won't be using them for farm work or anything else that requires a lot of force for that matter, while the SwissTool is made for darn near everything I can throw at it. Plus, the Swiss Tool has pretty much everything I need--not just a blade, pliers, and a couple flat bits that are nowhere near as good as the fold out drivers or regular, 1/4 bits.
-
I have a 95 Supertool and wondered how the Swisstool compared. I've been a lifelong Vic user and have always been intrigued by the Swisstool, but haven't had the spare cash lying around to pick one up. I'm gonna make the plunge one of these days!
-
I don't say which is better but on my opinion swiss tool (spirit) is one of the best tools I have used. And big plus that there is a good sheath with own compartments to plus set.
-
@Barry Rowland said:
I have a 95 Supertool and wondered how the Swisstool compared. I've been a lifelong Vic user and have always been intrigued by the Swisstool, but haven't had the spare cash lying around to pick one up. I'm gonna make the plunge one of these days!The Swisstool is one of my favorites. Terrific tool set and love the blunt-ish pliers. Have a look around the auction site often as you can pick one up reasonably.
-
I'm hoping to pick one up from there soon. My son and I were just talking about it last night. Neither one of us has ever seen one in person, but hope to remedy that soon!
-
@Barry Rowland said:
I'm hoping to pick one up from there soon. My son and I were just talking about it last night. Neither one of us has ever seen one in person, but hope to remedy that soon!I have one in my truck that I'd be happy to send your way to "test drive"? Have a play and see if in fact you like it then send it back after you've had your way with it
. Its a hard working tool and IMO should be in everyones collection but this way theirs no cost incurred to you.PM me and I'll shoot it out ASAP
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

