And so it begins.... (My adventures into Alox!)
-
Here's what the layer looks like in the finished knife.

-
Here's what the layer looks like in the finished knife.





Unconventional, nice tool set. Now, if only the mag glass frame wouldn't be plastic...

I know I know! I was going to hand cut one from brass as a test, but its so annoying to hand cut a circle its never perfect. I think I will just gamble some money on a small waterjet run of them in brass.
-
That's an odd choice of implements, but cool nonetheless [emoji106]
Sent from my SM-G920R4 using Tapatalk
-
Here's what the layer looks like in the finished knife.





Unconventional, nice tool set. Now, if only the mag glass frame wouldn't be plastic... [emoji14]ok:
I know I know! I was going to hand cut one from brass as a test, but its so annoying to hand cut a circle its never perfect. I think I will just gamble some money on a small waterjet run of them in brass.
Well, you know that I'll take a couple, also my Balloonist needs to become reality, and people will jump on the brass mag, once it's a thing.
-
I'll HAPPILY, and politely, ask for one for retrofit if you do a small run of the brass mag glass holders, Syph... :)
-
Put me down for at least one Brass Mag Glass holder too please !!
-
Robert,
Should you have a run of brass mag glass holders, please put me down for 2. Along with the scissors, the mag glass is my second most used tool in my SAKs (>50 y/o eyes demand these!)
Raul
-
Ok, I will order a piece of brass to get cut for the mag glass holder.
Its $100 for a square foot of 0.125" 464 (naval brass, it's harder than cartridge brass and would be better for this purpose) so Ive been reluctant, but im sure there are others who would like to upgrade from the plastic as well.
-
Here is something a bit different. Just a two layer SAK but the customer wanted a keyring on there too. Normally that is in the blade layer, but since there is no blade layer I had to figure something else out.
I ended up milling some off the end of the pliers spring and then riveting the keyring piece on that. I used 2 rivets and I think its on there solid enough.
Great work as always Syph in the "Adventures into Ti" thread - Amazing and ingenious approach to your build challenges once again.
Was the new KR originally from a liner or spring?I like the way you cut (milled) out a wee hole for the pliers pivot.
However if you had put the tools the other way round maybe that would not have been necessary?
Or even reversed the pliers - But I guess the spring would not work then?One general comment for everyone...
I love all these variations and mods - And obvioulsy the scales are something very special, different and new.
But it still amazes me that folk want such variations in the toolsets
I just think there are so many options with the catalogue models - Why not just go with one of those ???
I know you do Syph!! As does Def and many others here?And often with these variations - I think folk are missing out on tools
Eg this one - No blade or operners - I cannot imagine a SAK without those ???
Or the Rogueneer - No saw? - Why not take that too?? :oI think that quite a few of Syph's customs end up with people around here or at least with a great interest in knives and tools and will end up with people carrying dedicated folders or even fixed blade knives making a SAK blade redundant. As for the "why not this tool too" that's more of a less is more kind of deal I guess. I know I work along those lines when it comes to SAKs. Only the most useful of tools on the SAK (+corkscrew for how much it's worth it once you really need it). Drivers, scissors and pliers goes on a larger tool that won't get pocket carry.
-
@Syph007 said:
Ok, I will order a piece of brass to get cut for the mag glass holder.Its $100 for a square foot of 0.125" 464 (naval brass, it's harder than cartridge brass and would be better for this purpose) so Ive been reluctant, but im sure there are others who would like to upgrade from the plastic as well.
Awesome. Thank you!
-
Well this is what I get for not being organized... I already had some brass the right thickness for mag glasses. Just 6 sq inches, but thats enough for a bunch of test pieces. Dropping it off tomorrow for waterjet along with another big hunk of Ti for more scales.
The orders for 91mm Ti have really taken off and by far is the most requested mod now, so I need more of those. I'll do up some wrench scales for that size as well as people have requested those. Also I quickly ran out of the backscales with no tool cutout as the number of bladeless mods has been up alot.
I'm also about ready to pull the trigger on a tormach 440. I need to level up my capabilities and be able to offer custom engraving. Blowing 10k at once is scary though but if I dont do it now, I know I will regret it later on. I can then do some precise machining like making Ti scales for 58s with the area milled out for the sliding pen mechanism, which I know will be popular. I have 50 + of those pen things here and I could offer those milled into the 91/93 mm size as well. :D
-
Now that is very interesting, particularly as someone looking for engraving and who appreciates the 58mm pen. Not a practical purchase for one off modders, but with your volume, I could see it adding a lot of flexibility and allowing faster turn around times.
I'm excited to see what you can accomplish with this level of tooling.
-
And this morning's work was a Ti super tinker with copper cross and brass liners. :D




-
There's my precious beast[emoji2]
Technically I have two precious beasts now....thanks Syph[emoji16]Sent from my SM-G920R4 using Tapatalk
Hey Monrogue...just curious....why the fishscaler?
I used to have it on a previous SAK, and once I got a Swisschamp, I realized how much I like it. It's a great back scratcher for those just out of reach spots, which is a frequent use for me. It's a great misc type tool overall IMO[emoji106]
Sent from my SM-G920R4 using Tapatalk
-
Would it be possible to make 91mm or 93 mm Ti scales with the large pen?
-
@Sakpan74Gr said:
Would it be possible to make 91mm or 93 mm Ti scales with the large pen?Maybe but then an extra liner between the scale and tools would be needed. I might be able to add it in the same spot as i do tweezers now but the oen is very thick and wouldnt leave much scale thickness left.
-
Syph - I know the 91mm opener backspring isn't too flexible, making tools swaps hard. But I don't remeber you ever talking about the blade backspring. Could small blade + combo tool or small blade + can opener fit on the blade backspring?

-
@tommywp said:
Syph - I know the 91mm opener backspring isn't too flexible, making tools swaps hard. But I don't remeber you ever talking about the blade backspring. Could small blade + combo tool or small blade + can opener fit on the blade backspring?

Hmm yes i think that would work. Could even do bottle opener in place of large blade.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login