Skeletool RX?
-
Knifeless Rebar is $20 more than a regular Rebar WTF

-
I can see LM selling LOTS of those glass breaker bits from the Skeletool RX ( so long as they fit other LM bit holders and LM choose to market them).
-
@gregozedobe said:
I can see LM selling LOTS of those glass breaker bits from the Skeletool RX ( so long as they fit other LM bit holders and LM choose to market them).I think they will. They'd be dumb to not sell them. And they will work better in the Wave/Charge/Surge than in the Skeletool since you can lock the driver out with the tool closed - better grip. With the Skele, you would be striking the window with the tool either half opened - which could then collapse at the pliers, or fully opened - which would be awkward whilst striking. I don't understand why they wouldn't work something onto the outside of the carabiner area for glass breaking. Or at least make the glass breaker bit long enough to protrude past the carabiner
-
I can see LM selling LOTS of those glass breaker bits from the Skeletool RX ( so long as they fit other LM bit holders and LM choose to market them).
I think they will. They'd be dumb to not sell them. And they will work better in the Wave/Charge/Surge than in the Skeletool since you can lock the driver out with the tool closed - better grip. With the Skele, you would be striking the window with the tool either half opened - which could then collapse at the pliers, or fully opened - which would be awkward whilst striking. I don't understand why they wouldn't work something onto the outside of the carabiner area for glass breaking. Or at least make the glass breaker bit long enough to protrude past the carabiner
This is one of the main reasons I don't like the new Skeletool I have. It's a pain using the drivers since I can't close the tool up. The darn carabiner gets in the way. I may have to get an extender to remedy this
I'll get the knifeless Rebar as soon is it goes on sale. It's time I got my Klein hawkbill and Camillus TL-29 (my two main folders) out of retirement. I might as well also get a Victorinox Sentinel Plus.
As far as the Skeletool RX, I'll just get the glass breaker and stick it in my normal Skeletool. I figure I should get one, as you never know when one I may need to use it myself when I start driving, and two, I may need it to extricate someone some day. Is the Phillips/flat head combo bit sold by itself?
-
Haha, I knew they mistakingly put the names on their website and they lied to us when we asked about it. I knew they were lying.
-
@captain spaulding said:
Haha, I knew they mistakingly put the names on their website and they lied to us when we asked about it. I knew they were lying.
Yup! "Typo" - yea right

Yup, further fuelling my distrust. SOG go
that shouldn't be in circulation when new product info sneaks out, Leatherman just blatantly lies. Says a lot about a company when they're so comfortable to lie to their customer base -
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Trully revolutionary, different blade and new bit...
love how she is trying to sell all those (already few on skeletool) features. R&D need some fresh blood.
-
@50ft-trad said:
@captain spaulding said:
Haha, I knew they mistakingly put the names on their website and they lied to us when we asked about it. I knew they were lying.
Yup! "Typo" - yea right

Yup, further fuelling my distrust. SOG go
that shouldn't be in circulation when new product info sneaks out, Leatherman just blatantly lies. Says a lot about a company when they're so comfortable to lie to their customer baseYes they lied, but it doesn't bug me since i'm sure the employee signed a confidentiality contract when employed. If they confirmed the existence of it before they were supposed to the employee would of lost their job.
-
I demand that leatherman sell the glass breaker bit separately for my wave.. and my skeletool... and my bit kit... and my bit adapter for my super tool...... this may get expensive
-
@rescue4500 said:
I demand that leatherman sell the glass breaker bit separately for my wave.. and my skeletool... and my bit kit... and my bit adapter for my super tool...... this may get expensive
yep -
@rescue4500 said:
I demand that leatherman sell the glass breaker bit separately for my wave.. and my skeletool... and my bit kit... and my bit adapter for my super tool...... this may get expensiveAgreed. I need a few of those bits for sure.
-
@captain spaulding said:
I demand that leatherman sell the glass breaker bit separately for my wave.. and my skeletool... and my bit kit... and my bit adapter for my super tool...... this may get expensive
Agreed. I need a few of those bits for sure.
I want one too.
-
Wow, what better way than this to encompass 12 months of multitool bleeding edge innovation, Leatherman!
Your R&D department must be buzzing...hive of activity!
-
Disappointing.

-
@captain spaulding said:
@50ft-trad said:
@captain spaulding said:
Haha, I knew they mistakingly put the names on their website and they lied to us when we asked about it. I knew they were lying.
Yup! "Typo" - yea right

Yup, further fuelling my distrust. SOG go
that shouldn't be in circulation when new product info sneaks out, Leatherman just blatantly lies. Says a lot about a company when they're so comfortable to lie to their customer baseYes they lied, but it doesn't bug me since i'm sure the employee signed a confidentiality contract when employed. If they confirmed the existence of it before they were supposed to the employee would of lost their job.
Point taken Cap'n, but regardless of the reasoning, I still think it paints a bad picture when a supposedly customer facing company is caught lying to it's patrons. There's a big difference between someone there volunteering strategic marketting or development news, and having the integrity to hold your hand up and acknowledge albeit downplayed a data leak or other issue.
I'm not trying to colour other people's views, but it leaves a bitter taste with me. It's certainly not how I would have handled it, and I'd value having the company being trusted on it's word more highly than keeping a new product secret for an extra month.
It's not an anti-Leatherman stance either, in case anyone thinks "Al's at it again" :D. I'm not exactly known for singing the praises of SOG, but they handled it so much better, acknowledging a slip, and even sending out a few goodies to the guy that flagged it
-
@50ft-trad said:
@captain spaulding said:
@50ft-trad said:
[quote author=captain spaulding link=topic=62309.msg1213831#msg1213831 date=1453249532]
Haha, I knew they mistakingly put the names on their website and they lied to us when we asked about it. I knew they were lying.Yup! "Typo" - yea right

Yup, further fuelling my distrust. SOG go
that shouldn't be in circulation when new product info sneaks out, Leatherman just blatantly lies. Says a lot about a company when they're so comfortable to lie to their customer baseYes they lied, but it doesn't bug me since i'm sure the employee signed a confidentiality contract when employed. If they confirmed the existence of it before they were supposed to the employee would of lost their job.
Point taken Cap'n, but regardless of the reasoning, I still think it paints a bad picture when a supposedly customer facing company is caught lying to it's patrons. There's a big difference between someone there volunteering strategic marketting or development news, and having the integrity to hold your hand up and acknowledge albeit downplayed a data leak or other issue.
I'm not trying to colour other people's views, but it leaves a bitter taste with me. It's certainly not how I would have handled it, and I'd value having the company being trusted on it's word more highly than keeping a new product secret for an extra month.
It's not an anti-Leatherman stance either, in case anyone thinks "Al's at it again" :D. I'm not exactly known for singing the praises of SOG, but they handled it so much better, acknowledging a slip, and even sending out a few goodies to the guy that flagged it
[/quote]Ohh no, Al is at it again
I understand what you mean but never forget:
You know as well as I do decisions made in real time are never perfect.
If you look around in any company, you will have similar hick-ups (that's what this is to me) all the time... most just never come to light or are quickly forgotten. Ultimately, if that is the worst LM does it's still a great company.
-
Dig the color of the "new" Skeletal but eh. I'd also love one or 3 of those bits too.
-
they'll have to sell the breaker bit as a replacement part for the rx.... right??
-
Is no one else concerned about the bit adapter holding up to the strain of punching through a window? I've never actually done it, but doesn't breaking a window require a fair amount of force?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login