SAK's - Corkscrew or Phillips?
-
I think I had a Tinker once -- I definitely remember the Philips snapping shut on my fingers most of the times I tried to use it. As others here have pointed out, the T shape is nobody's dream configuration for a screwdriver. In many situations it is unusable.
The can opener as Philips is great, as a last resort. No way would I want to do anything like put an ikea shelf together using the can opener. It's an emergency measure and not a serious solution to anything.Most of the other Vic tools do their job really well so it is surprising to find people so tolerant of the second-rate solutions they have for handling Philips screws. As far as I can see, two SAKs have usable philips drivers... and neither of them are particarly skinny.
I love everything about the knives I've got and am constantly stunned by the quality of the tools you can get for pennies. It just baffles me that in all these years Victorinox has consistently shunned the most useful tool of them all , the philips head screwdriver.
Having said that, I have a Swisstool Spirit, which is so good I probably don't need anything else. But a Spartanesque cellidor with a usable philips would be a dream. I'd swap the big blade for it, any day.
-
I once assembled an entire cube shelf with nothing but an Outrider. The can opener was a great Phillips screwdriver. It was getting the nails in that took some effort.
The only problem with an in-line Phillips is that it is more or less a one-trick pony. If that's the only trick you need, then fine -- but sometimes it's worthwhile giving up some specialization in exchange for versatility.
Besides, it's worth noting that here in Canada we use an awful lot of Robertson screws.
-
@Jothra said:
Besides, it's worth noting that here in Canada we use an awful lot of Robertson screws.What on earth...! I've never even heard of Robertson screws. You have screws with a square slot? The only time I've seen this in Europe is on trains. They have big square slots on knobs they don't want passengers to mess with...
-
With the exception of drywall screws and electronics screws, Robertsons are basically the standard up here, and have been for a very long time. They are far harder to strip than Phillips screws.
-
I like having the corkscrew on the backspring and the Philips on the main side. On the main side, the screwdriver opens all the way--that lets you reach into a tighter area. On the backside, the knife acts as a T-handle, and can get in the way of screwdriving.
-
@Thunderpants said:
Most of the other Vic tools do their job really well so it is surprising to find people so tolerant of the second-rate solutions they have for handling Philips screws. As far as I can see, two SAKs have usable philips drivers... and neither of them are particarly skinny.I love everything about the knives I've got and am constantly stunned by the quality of the tools you can get for pennies. It just baffles me that in all these years Victorinox has consistently shunned the most useful tool of them all , the philips head screwdriver.
I think part of the trouble with the inline phillips head is that it requires a thick layer, and since it only takes up half the length of the knife they need to pair it with another thick tool such as the magnifying glass on the Explorer, Champion and Swiss Champs or the LED on the Huntsman Lite. Both of those tools seemed to be maligned by many people.
-
@fozzy_au said:
I think part of the trouble with the inline phillips head is that it requires a thick layer, and since it only takes up half the length of the knife they need to pair it with another thick tool such as the magnifying glass on the Explorer, Champion and Swiss Champs or the LED on the Huntsman Lite. Both of those tools seemed to be maligned by many people.Yeah, I just noticed for the 1st time the Mountaineer Lite - I bet it's a beast in person, but it has the Phillips driver in a semi-sane configuration. Downside, it's as wide as an aircraft carrier and has one of those dimmest-light-ever-made-LEDs on it.
-
I think the reason SAKs are addictive is the perfect one doesn't exist... the one you don't have holds the promise of being perfect, which of course it never is.
So there you go. You're all heroin addicts in disguise. :D
-
@shamus said:
Vic offers an inline Phillips on the Champ and Explorer, the tinker series has a t-mounted Phillips driver, the can opener tool can just about fit into any Phillips screw out there, and the Cybertools and Swisstools have torx and Phillips bits. I’m not sure how one could see Vic as being hostile towards Philips screws.
You have missed a few:
Minichamp
Rambler
Manager
Midnite Manager
RallyProbably more as well.
There are also the Victorinox SwissTool and SwissTool multitools that all have Phillips screwdrivers.
-
Another corkscrew preference here. Love being able to carry the eyeglass screwdriver. And so many models have the can opener with the driver that can handle many philips screws.
if the screw is torqued too tight & you slip u can damage the can opener and the screw
And if the screw is torqued too tight, you can with surprising ease screw up the peening of the knife with the backmounted Philips. ;) We have some threads lying around with pictures and expletives somewhere around this place. :)
-
This is the thread that keeps coming back to life.
The whole world is held together with phillips screws, not wine corks.

-
@powernoodle said:
This is the thread that keeps coming back to life.The whole world is held together with phillips screws, not wine corks.

The Philips screw is slowly being replaced, while the need for a good wine rather seems to grow. :D
-
I guess that if one drinks enough wine, he no longer cares if screws need tightening.
I may test that theory.
-
@powernoodle said:
I guess that if one drinks enough wine, he no longer cares if screws need tightening.I may test that theory.
What screws?

-
I am totally sold on the in-line philips, and the corkscrew driver (as a glasses wearer). I use the in-line philips regularly and wouldn't feel ok putting the same pressure on the back-side driver - more likely to shear/distort.
The CS can also be used to house a temporary lanyard;
<a href="http://s923.photobucket.com/user/magentus2112/media/WP_20160122_003_zpsbnbkwicj.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i923.photobucket.com/albums/ad80/magentus2112/WP_20160122_003_zpsbnbkwicj.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Logic path:
I like SAKs
SAK pliers can't handle what I need pliers to do
I need to carry a pliers tool
The pliers tool will usually have a Phillips and assorted flat drivers
The pliers tool is unlikely to have a corkscrew
The pliers tool is unlikely to have scissors as good as a SAK
My SAK should have scissors and a corkscrewThis formula works very well for me indeed
That said, I have found that a Gerber Dime is sometimes all I need on the pliers front, and as such have been considering a DofE with a blade modification. If I do this, it will be the only SAK with backspring Phillips I carry (except for the Mega84 which has both backspring Phillips AND corkscrew)
-
Excellent logic!!!
-
@50ft-trad said:
Logic path:I like SAKs
SAK pliers can't handle what I need pliers to do
I need to carry a pliers tool
The pliers tool will usually have a Phillips and assorted flat drivers
The pliers tool is unlikely to have a corkscrew
The pliers tool is unlikely to have scissors as good as a SAK
My SAK should have scissors and a corkscrewThis formula works very well for me indeed
I have a modified formula, the scissors goes in a Swisscard, but otherwise I fully agree with you!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



