SAK's - Corkscrew or Phillips?
-
The corkscrew is more versatile. That's one of the reasons I didn't switch back to my Evo s18 after ths Huntsman challenge.
-
Both , this is why my Explorer is my SAK of choice
-
@kmanct3 said:
Both , this is why my Explorer is my SAK of choiceYes but who needs to carry a flipping magnifying glass? The Explorer looks pretty useful, but it looks like something 12 year old boys get for Xmas.
I don't know why Victorinox are so hostile to Philips screwsdrivers. Flat head screws are a thing of the past. Nobody since 1950 has willingly purchased a pack of them. Every single item in the modern world is held together with Philips head screws (or Torx). Yes, sometimes you can just about get by with some other tool... but seriously. Victorinox is being very complacent here. I for one would welcome a SAK that didn't look like it was designed for the kids in an Enid Blighton novel.
-
While I can't say I need to carry a mag glass, it has been useful to me a few times. Once it was a big help in reading a semi worn out serial number on a file cabinet lock that I needed to determine its corresponding key to unlock it. That sort of thing doesn't happen often, and I don't always have a mag glass SAK on me, but I was damn glad I had it that time
I get what you're saying about it being like a toy as well, because I also use it for fun :D -
When it comes to pocket tools, versatility is the name of the game. It turns out that almost any non-recessed Phillips screw will come out via one Victorinox slot driver or the other, and until you spend some real time doing demo it's hard to fathom the ubiquitousness of slot screws.
-
Both , this is why my Explorer is my SAK of choice
Yes but who needs to carry a flipping magnifying glass? The Explorer looks pretty useful, but it looks like something 12 year old boys get for Xmas.
I don't know why Victorinox are so hostile to Philips screwsdrivers. Flat head screws are a thing of the past. Nobody since 1950 has willingly purchased a pack of them. Every single item in the modern world is held together with Philips head screws (or Torx). Yes, sometimes you can just about get by with some other tool... but seriously. Victorinox is being very complacent here. I for one would welcome a SAK that didn't look like it was designed for the kids in an Enid Blighton novel.
Valid point , BUT, I personally do find the mag glass useful, I mean this is the whole purpose of a SAK isn't it ?
-
@Thunderpants said:
Yes but who needs to carry a flipping magnifying glass? The Explorer looks pretty useful, but it looks like something 12 year old boys get for Xmas.I don't know why Victorinox are so hostile to Philips screwsdrivers. Flat head screws are a thing of the past. Nobody since 1950 has willingly purchased a pack of them. Every single item in the modern world is held together with Philips head screws (or Torx). Yes, sometimes you can just about get by with some other tool... but seriously. Victorinox is being very complacent here. I for one would welcome a SAK that didn't look like it was designed for the kids in an Enid Blighton novel.
Vic offers an inline Phillips on the Champ and Explorer, the tinker series has a t-mounted Phillips driver, the can opener tool can just about fit into any Phillips screw out there, and the Cybertools and Swisstools have torx and Phillips bits. I’m not sure how one could see Vic as being hostile towards Philips screws.

And a magnfying glass? I use one quite often when removing splinters. :)
-
I think I had a Tinker once -- I definitely remember the Philips snapping shut on my fingers most of the times I tried to use it. As others here have pointed out, the T shape is nobody's dream configuration for a screwdriver. In many situations it is unusable.
The can opener as Philips is great, as a last resort. No way would I want to do anything like put an ikea shelf together using the can opener. It's an emergency measure and not a serious solution to anything.Most of the other Vic tools do their job really well so it is surprising to find people so tolerant of the second-rate solutions they have for handling Philips screws. As far as I can see, two SAKs have usable philips drivers... and neither of them are particarly skinny.
I love everything about the knives I've got and am constantly stunned by the quality of the tools you can get for pennies. It just baffles me that in all these years Victorinox has consistently shunned the most useful tool of them all , the philips head screwdriver.
Having said that, I have a Swisstool Spirit, which is so good I probably don't need anything else. But a Spartanesque cellidor with a usable philips would be a dream. I'd swap the big blade for it, any day.
-
I once assembled an entire cube shelf with nothing but an Outrider. The can opener was a great Phillips screwdriver. It was getting the nails in that took some effort.
The only problem with an in-line Phillips is that it is more or less a one-trick pony. If that's the only trick you need, then fine -- but sometimes it's worthwhile giving up some specialization in exchange for versatility.
Besides, it's worth noting that here in Canada we use an awful lot of Robertson screws.
-
@Jothra said:
Besides, it's worth noting that here in Canada we use an awful lot of Robertson screws.What on earth...! I've never even heard of Robertson screws. You have screws with a square slot? The only time I've seen this in Europe is on trains. They have big square slots on knobs they don't want passengers to mess with...
-
With the exception of drywall screws and electronics screws, Robertsons are basically the standard up here, and have been for a very long time. They are far harder to strip than Phillips screws.
-
I like having the corkscrew on the backspring and the Philips on the main side. On the main side, the screwdriver opens all the way--that lets you reach into a tighter area. On the backside, the knife acts as a T-handle, and can get in the way of screwdriving.
-
@Thunderpants said:
Most of the other Vic tools do their job really well so it is surprising to find people so tolerant of the second-rate solutions they have for handling Philips screws. As far as I can see, two SAKs have usable philips drivers... and neither of them are particarly skinny.I love everything about the knives I've got and am constantly stunned by the quality of the tools you can get for pennies. It just baffles me that in all these years Victorinox has consistently shunned the most useful tool of them all , the philips head screwdriver.
I think part of the trouble with the inline phillips head is that it requires a thick layer, and since it only takes up half the length of the knife they need to pair it with another thick tool such as the magnifying glass on the Explorer, Champion and Swiss Champs or the LED on the Huntsman Lite. Both of those tools seemed to be maligned by many people.
-
@fozzy_au said:
I think part of the trouble with the inline phillips head is that it requires a thick layer, and since it only takes up half the length of the knife they need to pair it with another thick tool such as the magnifying glass on the Explorer, Champion and Swiss Champs or the LED on the Huntsman Lite. Both of those tools seemed to be maligned by many people.Yeah, I just noticed for the 1st time the Mountaineer Lite - I bet it's a beast in person, but it has the Phillips driver in a semi-sane configuration. Downside, it's as wide as an aircraft carrier and has one of those dimmest-light-ever-made-LEDs on it.
-
I think the reason SAKs are addictive is the perfect one doesn't exist... the one you don't have holds the promise of being perfect, which of course it never is.
So there you go. You're all heroin addicts in disguise. :D
-
@shamus said:
Vic offers an inline Phillips on the Champ and Explorer, the tinker series has a t-mounted Phillips driver, the can opener tool can just about fit into any Phillips screw out there, and the Cybertools and Swisstools have torx and Phillips bits. I’m not sure how one could see Vic as being hostile towards Philips screws.
You have missed a few:
Minichamp
Rambler
Manager
Midnite Manager
RallyProbably more as well.
There are also the Victorinox SwissTool and SwissTool multitools that all have Phillips screwdrivers.
-
Another corkscrew preference here. Love being able to carry the eyeglass screwdriver. And so many models have the can opener with the driver that can handle many philips screws.
if the screw is torqued too tight & you slip u can damage the can opener and the screw
And if the screw is torqued too tight, you can with surprising ease screw up the peening of the knife with the backmounted Philips. ;) We have some threads lying around with pictures and expletives somewhere around this place. :)
-
This is the thread that keeps coming back to life.
The whole world is held together with phillips screws, not wine corks.

-
@powernoodle said:
This is the thread that keeps coming back to life.The whole world is held together with phillips screws, not wine corks.

The Philips screw is slowly being replaced, while the need for a good wine rather seems to grow. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login