Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE NOTIFICATIONS 0 MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

Newbie modding SAKs

Scheduled Pinned Locked Moved The Mod Squad
117 Posts 1 Posters 17.4k Views
  1. Home
  2. Tool Talk
  3. The Mod Squad
  4. Newbie modding SAKs
Newbie modding SAKs
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Zed Offline
    Zed
    Posts: 19,555
    Zed Offline
    Zed
    wrote on last edited by
    #10 Quote Reply

      Both are awesome :drool: :salute:

      1 Reply Last reply
      • m47mu74nt Offline
        m47mu74nt
        Posts: 2,520
        m47mu74nt Offline
        m47mu74nt
        wrote on last edited by
        #11 Quote Reply

          @Zed said:
          Both are awesome :drool: :salute:

          Thank you :D

          **Project 3: Ti Sentry **(let's start with something simple)
          Part one: disassembling the baby ==> nothing new regarding this part, just the usual stuff
          removing red nylon scales

          Drilling rivets (let's try not ruining the bushings this time :oops: )

          Removing bushings:

          Tear down completed !

          But, wait, i've been told Victorinox was using 1.6mm rivets for Classic and 2.25/2.4 for the Alox... but ... 84mm Sentry has 2.0mm rivets ??? .... need to also get a 2.0mm brass wire then :facepalm:

          On the first build (the micarta scales) i used the cellidor scales as template but i've noticed that using the liners gives much better results. So that's how i'll proceed this time :
          Using double sided tape and pasting them on the Titanium plate


          *
          No drilling for today, i'll first need to buy the 2.0mm brass rod before starting to cut in the Ti plate.
          Part two coming in a few days :) *

          1 Reply Last reply
          • m47mu74nt Offline
            m47mu74nt
            Posts: 2,520
            m47mu74nt Offline
            m47mu74nt
            wrote on last edited by
            #12 Quote Reply

              Part one (bis)
              Local retailer doesn't have ANY 2.0mm bras rod :rant: :rant: :rant:

              So... let's investigate the anodization part a little more.
              As said before i'm using lemon juice as acid solution (i doesn't even have white vinegar at home) until i get some H2SO4.

              Interesting fact is that with my setup the color depends of 3 parameters: Volts, Time, Surface
              i'm using 3 PSU savaged from random stuff:

              • a computer ATX PSU ==> 12V
              • an epson printer PSU ==> 40V
              • an old VHS recorder PSU ==> lots of strange voltages available including 34, 48 (wiring the +34V and the - 14V) and 57V (wiring +34V and -23V). It also needs a dummy load to correctly outputs enough current (a computer fan plugged between +12V and gnd is enough)

              Making some dots with and brush connected to the - give the following results:
              From left to right: 40V waiting from 3 to 15 seconds per dots, the longer the contact the more blue.

              With the titanium plate [slightly shorter and wider than a Vic Classic scale] in the water+lemon solution (maximum surface area)
              Sand paper (grit 320) between two tests to remove the oxide formed on the surface. (as expected, the higher the voltage the thicker the oxide and the harder the removal)

              12V, 5 minutes : dark bronze

              34V, 5 minutes : deep violet

              You may notice there is no picture at 40V since the Epson printer PSU cannot give enough current when the contact surface is that big...

              48V, 5 minutes : deep blue-violet

              57V, 5 minutes : blue with some violet

              57V, 10 minutes : light blue

              it is quite interesting to see that when the PSU start the current is about 160mA @57V, and then it decreases to 10mA after 1minutes.

              A 'painted' lightsaber and some shading test:

              1 Reply Last reply
              • Sparky415 Offline
                Sparky415
                Posts: 13,000
                Sparky415 Offline
                Sparky415
                wrote on last edited by
                #13 Quote Reply

                  Interesting stuff M

                  1 Reply Last reply
                  • sLaughterMed Offline
                    sLaughterMed
                    Posts: 3,450
                    sLaughterMed Offline
                    sLaughterMed
                    wrote on last edited by
                    #14 Quote Reply

                      @Sparky415 said:
                      Interesting stuff M

                      +1

                      1 Reply Last reply
                      • SteveC Offline
                        SteveC
                        Global Moderators
                        Posts: 73,535
                        SteveC Offline
                        SteveC
                        Global Moderators
                        wrote on last edited by
                        #15 Quote Reply

                          Very cool :tu:

                          1 Reply Last reply
                          • m47mu74nt Offline
                            m47mu74nt
                            Posts: 2,520
                            m47mu74nt Offline
                            m47mu74nt
                            wrote on last edited by
                            #16 Quote Reply

                              With the angle grinder out for a while, the scale making project is on hold :facepalm: :rant:

                              In the mean time, here is a new Ti experiment:
                              Heating (flame) with some Salt crystals (table salt) held in place my wetting the Ti plate before applying the salt. Heat gives the bronze color, the salt crystals create the blue dots on the surface

                              heat-salt-Ti.jpg

                              1 Reply Last reply
                              • m47mu74nt Offline
                                m47mu74nt
                                Posts: 2,520
                                m47mu74nt Offline
                                m47mu74nt
                                wrote on last edited by
                                #17 Quote Reply

                                  Part two : drilling and cutting the Ti scales (Classic and Sentry)

                                  Pre-drilling through liners :
                                  (No, this is not a drill press, but a hand drill on a stand)

                                  NB: applying double sided tape long before working is not a good idea, i had some pain to remove the liners without ruining them :facepalm:

                                  Drilling done:

                                  Time to cut the scales out of the Ti plate: Titanium screams while being cut by the hacksaw...

                                  Testing Alignment:

                                  Blank testing the Sentry:

                                  End of this part for now, still lacks the angle grinder to continue the scales :)
                                  *Next is a texture test on Ti that i'm doing right now.
                                  *

                                  1 Reply Last reply
                                  • m47mu74nt Offline
                                    m47mu74nt
                                    Posts: 2,520
                                    m47mu74nt Offline
                                    m47mu74nt
                                    wrote on last edited by
                                    #18 Quote Reply

                                      I hope this step by step WIP isn't too boring, if so, don't worry this is the last part!

                                      Part 3: grinding, anodizing, assembling
                                      As the angle grinder is back, that's time to shape the scales: grind grind grind

                                      Sanding the scale border held together to get an even surface:

                                      After sanding a few steps are left before anodizing : drilling bevels in the rivet holes to ease the peening process, breaking the angles on the scale borders
                                      and for fun, 3 dead holes to get textured anodizing

                                      Anodizing result (step by step of that bi-color and shading process may come later if needed.):
                                      Light blue holes : 57V, lemon juice
                                      Shading : 34V, lemon juice

                                      Blank testing (yeah, i should have done that before... at that point the spring is a little recessed behind the scales on the back. Let's say "it's not a bug, it's an undocumented feature"
                                      Note the gold anodized inside

                                      Cutting rivets:

                                      Shorting rivets with a file, using a small plastic sheet to protect the Ti scales:

                                      No pic during peening process, only two hands here :P

                                      And the result:
                                      Sadly the pics does not render the real colors here.
                                      The dots face has the following pattern : light blue dots and scale with violet shading slowly into bronze
                                      The other face is blue>violet>bronze>gold

                                      Conclusion: :climber: (this gif has far too much tools to represent my build :facepalm:

                                      This build is far from 'professional grade' work (lots of small defects that i could have anticipated... and fixed?) but i think that on the overall it worths the time i spent :)
                                      This build really lacks the Swiss cross, that i can't do without a milling machine (but it would look great with the bi-color anodized dead holes)
                                      What do you think? should i continue this way or did i made horrible mistakes that i shouldn't do ever again?

                                      1 Reply Last reply
                                      • Huntsman Offline
                                        Huntsman
                                        Global Moderators
                                        Posts: 5,781
                                        Huntsman Offline
                                        Huntsman
                                        Global Moderators
                                        wrote on last edited by
                                        #19 Quote Reply

                                          @m47mu74nt said:
                                          I hope this step by step WIP isn't too boring, if so, don't worry this is the last part!

                                          What do you think? should i continue this way or did i made horrible mistakes that i shouldn't do ever again?

                                          Step by step: **definitely not ** boring - makes it better and very interesting
                                          And all the annodising stuff is fascinating :tu:

                                          Result looks great to me

                                          Re quality/mistakes - I can't really see any - so I'd say continue
                                          I guess if you are going to sell on, then you need to correct the mistakes, if there are any

                                          Great work and thanks for the posts

                                          1 Reply Last reply
                                          • m47mu74nt Offline
                                            m47mu74nt
                                            Posts: 2,520
                                            m47mu74nt Offline
                                            m47mu74nt
                                            wrote on last edited by
                                            #20 Quote Reply

                                              @Huntsman said:

                                              @m47mu74nt said:

                                              I hope this step by step WIP isn't too boring, if so, don't worry this is the last part!

                                              What do you think? should i continue this way or did i made horrible mistakes that i shouldn't do ever again?

                                              Step by step: **definitely not ** boring - makes it better and very interesting
                                              And all the annodising stuff is fascinating :tu:

                                              Result looks great to me

                                              Re quality/mistakes - I can't really see any - so I'd say continue
                                              I guess if you are going to sell on, then you need to correct the mistakes, if there are any

                                              Great work and thanks for the posts

                                              Thank you for your feedback :-)
                                              Bad pictures help not to show flaws :whistle:
                                              BTW I won't sell anything, at most those amateur builds will become gifts for friends

                                              1 Reply Last reply
                                              • Fortytwo Offline
                                                Fortytwo
                                                Posts: 1,285
                                                Fortytwo Offline
                                                Fortytwo
                                                wrote on last edited by
                                                #21 Quote Reply

                                                  @m47mu74nt said:
                                                  ...at most those amateur builds will become gifts for friends

                                                  Your friends should be happy!

                                                  1 Reply Last reply
                                                  • Syph007 Offline
                                                    Syph007
                                                    Global Moderators
                                                    Posts: 9,842
                                                    Syph007 Offline
                                                    Syph007
                                                    Global Moderators
                                                    wrote on last edited by
                                                    #22 Quote Reply

                                                      Good stuff! I like when people do progress pics, its nice to see how people work and step by steps are much more interesting then just posting the final build. In fact many successful blade makers started off and gained popularity specificly because they showed how they do their work. It draws in an audience.

                                                      Some things I thought while reading.

                                                      The liners are the best templates as you discovered. I use little clamps to hold them on the material then scribe lines around and remove. I used double sides tape before too.. annoying. :D

                                                      I didnt realize how much Ti-6-4 hardens when heated so if you are using any method to cut them that involves heat, drill holes first. This really caught me off guard when I made the fold over clip on the mini champ. It was impossible to tap the holes in that scale after it was heated to fold.

                                                      I grind/sand my scales in fully assembled knife mode to get them exactly flush with the backspring. I dont use the 'good' parts that will be in the final build, just junker old ones. Its the only way I can get the perfectly flush.

                                                      Keep up the great work!

                                                      1 Reply Last reply
                                                      • Boaz Offline
                                                        Boaz
                                                        Posts: 316
                                                        Boaz Offline
                                                        Boaz
                                                        wrote on last edited by
                                                        #23 Quote Reply

                                                          Thanks for sharing, I love to see this sort of project. I think this one looked very nice, I like the 'dead hole' details, it adds a little something. Nice work [emoji1]

                                                          1 Reply Last reply
                                                          • m47mu74nt Offline
                                                            m47mu74nt
                                                            Posts: 2,520
                                                            m47mu74nt Offline
                                                            m47mu74nt
                                                            wrote on last edited by
                                                            #24 Quote Reply

                                                              @Fortytwo said:
                                                              Your friends should be happy!

                                                              I hope so :)

                                                              @Syph007 said:
                                                              Good stuff! I like when people do progress pics, its nice to see how people work and step by steps are much more interesting then just posting the final build. In fact many successful blade makers started off and gained popularity specificly because they showed how they do their work. It draws in an audience.

                                                              thank you, the issue with WIP is that it's difficult to both think about taking pictures and building, at least for newbies :D

                                                              @Syph007 said:
                                                              Some things I thought while reading.

                                                              The liners are the best templates as you discovered. I use little clamps to hold them on the material then scribe lines around and remove. I used double sides tape before too.. annoying. :D

                                                              hmmm so you don't pre-drill through the liners? as i don't have a good drill press, i need them in place to guide the drill bit :-\

                                                              @Syph007 said:
                                                              I didnt realize how much Ti-6-4 hardens when heated so if you are using any method to cut them that involves heat, drill holes first. This really caught me off guard when I made the fold over clip on the mini champ. It was impossible to tap the holes in that scale after it was heated to fold.

                                                              This explains the behavior i faced when trying to cut Ti with the angle grinder!

                                                              @Syph007 said:
                                                              I grind/sand my scales in fully assembled knife mode to get them exactly flush with the backspring. I dont use the 'good' parts that will be in the final build, just junker old ones. Its the only way I can get the perfectly flush.

                                                              Keep up the great work!

                                                              nice tip! though i can't follow it until i have enough spare parts to make a dummy build dedicated to grinding, for now i already used the two non limited series of SAKs i had.. (the green Classic SD, and that Ecoline Nylon Sentry)

                                                              @Boaz said:
                                                              Thanks for sharing, I love to see this sort of project. I think this one looked very nice, I like the 'dead hole' details, it adds a little something. Nice work [emoji1]

                                                              Here are some better pics: (i've notice with these that my rivets are far from "nice" so i reworked them a little [no pic yet])
                                                              The dead holes aren't perfect either, looks like the old milling cutter (dremel one) i used didn't do it's job [or i failed using it :whistle:]
                                                              This time the color scheme is much closer to reality!

                                                              1 Reply Last reply
                                                              • Syph007 Offline
                                                                Syph007
                                                                Global Moderators
                                                                Posts: 9,842
                                                                Syph007 Offline
                                                                Syph007
                                                                Global Moderators
                                                                wrote on last edited by
                                                                #25 Quote Reply

                                                                  @m47mu74nt said:

                                                                  @Syph007 said:

                                                                  Some things I thought while reading.

                                                                  The liners are the best templates as you discovered. I use little clamps to hold them on the material then scribe lines around and remove. I used double sides tape before too.. annoying. :D

                                                                  hmmm so you don't pre-drill through the liners? as i don't have a good drill press, i need them in place to guide the drill bit :-\

                                                                  Oh yes I do use the liners as drilling templates too. But I actually take 4-5 liners rivetted together for that purpose so its a nice thick stack. I use this to drill that hidden 4th hole in all the 91mm Ti scales I do.

                                                                  1 Reply Last reply
                                                                  • m47mu74nt Offline
                                                                    m47mu74nt
                                                                    Posts: 2,520
                                                                    m47mu74nt Offline
                                                                    m47mu74nt
                                                                    wrote on last edited by
                                                                    #26 Quote Reply

                                                                      @Syph007 said:
                                                                      Oh yes I do use the liners as drilling templates too. But I actually take 4-5 liners rivetted together for that purpose so its a nice thick stack. I use this to drill that hidden 4th hole in all the 91mm Ti scales I do.

                                                                      Is there any thing i should really know before messing with a 91mm? i'd like to make one for a friend's birthday, but before failing i need some advices: is that much more complicated than a Classic?
                                                                      i've already found that peening the 84mm rivets (used 2.0mm brass rod) is slightly more complicated than the 1.5mm i used for the Classic. Plus i'm a little worried about the back tools...

                                                                      On another subject i'm preparing a post about my process of bi-color anodizing, if anybody wants to make colored recessed swiss cross in their Ti builds that could help :) (it is not a revolution, but it's quite different from what i've read before starting)

                                                                      1 Reply Last reply
                                                                      • temo Offline
                                                                        temo
                                                                        Posts: 639
                                                                        temo Offline
                                                                        temo
                                                                        wrote on last edited by
                                                                        #27 Quote Reply

                                                                          I used 2x2.5mm and 2x2mm brass nails. I think 2.5mm on ends were easier. Also I did some errors with tools so had to rebuild my handyman plus. So good to check everything before peening. I would like to know if there would be simple tools and parts to do riverts like vic have (no need for hammering). Looks like pressed.

                                                                          1 Reply Last reply
                                                                          • Teno Offline
                                                                            Teno
                                                                            Posts: 21
                                                                            Teno Offline
                                                                            Teno
                                                                            wrote on last edited by
                                                                            #28 Quote Reply

                                                                              Very nice work!!!!

                                                                              Marcelo, from Argentina

                                                                              1 Reply Last reply
                                                                              • m47mu74nt Offline
                                                                                m47mu74nt
                                                                                Posts: 2,520
                                                                                m47mu74nt Offline
                                                                                m47mu74nt
                                                                                wrote on last edited by
                                                                                #29 Quote Reply

                                                                                  @temo said:
                                                                                  I used 2x2.5mm and 2x2mm brass nails. I think 2.5mm on ends were easier. Also I did some errors with tools so had to rebuild my handyman plus. So good to check everything before peening. I would like to know if there would be simple tools and parts to do riverts like vic have (no need for hammering). Looks like pressed.

                                                                                  This video gives us a clue : https://youtu.be/qIpr1_wmvDs
                                                                                  The rivets are friction and press fitted, the tool they use spins and press the rivet end (2min 15sec)

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 3
                                                                                  • 4
                                                                                  • 5
                                                                                  • 6
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. The Mod Squad
                                                                                  4. Newbie modding SAKs
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0