Show off your Sak mod's!
-
-
@hiraethus said:
Tweaked my Pioneer Fettler again, replaced the pen blade with an electrician's blade:

Fettler gets additional fettling, nice!

-
@Flint Hills said:
On a 91mm, are there any tools that can share a spring with a 3d Phillips other than the magnifier or led light? I have the shorter version 3d Phillips that came out of a Spartan Lite. Thanks!
I'm not an expert but I've been doing some research around the inline phillips and on 91mm the light and magnifier are the only things that will fit I've ran across. There are probably exceptions for modified tools, such as a custom shortened or reprofiled flathead/bottle opener. Now, the newer stubby inline will sit opposite the bottle opener or can opener (or both) on a 93mm from what I've seen.
Good luck! The inline phillips is a cool tool!
IIRC there have been a few mods made with teh Wenger wrench across the Phillips - I don´t know hoa intricate teh workinvolved is, but I think I remember hanksolon did a few mods like that.
-
Here are mine for now :
A micarta Compact and a Ti Classic (flame anodized)

More pictures on my 'own' thread :) ==> /topic/64155
Obviously that's not on the level of most guys over here, but that's my first attempts ;)
-


Prototype, scissors and hook. Well at least it is slim..
-
From prototype I think I redo and add screw driver / opener layer (2 layer tool).
To handyman I did add philips:

It starts to be quite close to swisschamp. Though different oder of tools and I think one layer missing vs swiss champ. Still add scales and this I keep. Maybe carry more often as well.
-
@temo said:
From prototype I think I redo and add screw driver / opener layer (2 layer tool).To handyman I did add philips:

It starts to be quite close to swisschamp. Though different oder of tools and I think one layer missing vs swiss champ. Still add scales and this I keep. Maybe carry more often as well.
nice :)
i'm not messing with tools yet
Here are the Ti scales i made for a Sentry: step by step should be updated tomorrowAnodized Ti doesn't like pictures, the pic is sooooooo far from reality for the colors


-
Yes its very hard to photograph Ti well. The best luck I have is with natural light outdoors, but not too bright of light.
-
@m47mu74nt said:
Here are the Ti scales i made for a Sentry: step by step should be updated tomorrowThose are nice, and good to have step by step pics. I again started to mess with the tools and planning scales. Hardest part was to locate correct size riverts and first layers (specially screw driver / opener layer was quite tight to set up). Now used original scales still:

-
Pics tomorrow I pomise... Tore an ebay Swisschamp apart today, removing the metal saw and fish scaler layers. Basically made an Explorer with wood saw, which I am sure has a name I'm not familiar with. Was going to make a Yeoman with saw, but the Champ's opener layer is where the lanyard attachment point is... This could become fun. And expensive... Brass rods incoming, brought my vise, hammers, and dremel home from work on Friday. 1x30 belt grinder coming home this week. Trolling for more donors...
Edit- Pliers came out too... duh. :)
-
Pics!

No going back now...



A few layers in.



-
Nice one.

-
I did continue to next slim scissor prototype. Added layer but still quite slim:


Getting to be close to get friend for supertool. Vic "leather". Though don't know how well leather will last on scale.
-

I've tried to keep this vaguely period correct with an older Explorer - thicker blade with plain liners, keyring on the small blade spacer, grooved corkscrew, grey mag/longer phillips, screwed scissors with no hook and gen II pliers. The order isn't how Victorinox would do it though, I've swapped the pliers and phillips/magnifier layer to make the phillips easier to use. -
-
@temo said:
I did continue to next slim scissor prototype. Added layer but still quite slim:

Getting to be close to get friend for supertool. Vic "leather". Though don't know how well leather will last on scale.
I'd be most afraid of what will happen to those rivets. The risk seems high that they'll cut into the leather and you'll start getting play in the tools.
-
Yes it will not be long life solution. Leather glued and rivets go quite much through leather. I did leave just scissors and use until have time and idea to make better scale..

-
@hiraethus said:
Troubleshooter:


All latest-generation parts, no keyring, fine driver instead of the chisel on the file, and a nail file on the hook.Veeeeeeeeerrrrrrry nice H - gotta get one of those hooks one day.
-
Thanks M. Syph very kindly sent me a couple a while back.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



