Show off your Sak mod's!
-
Yes its very hard to photograph Ti well. The best luck I have is with natural light outdoors, but not too bright of light.
-
@m47mu74nt said:
Here are the Ti scales i made for a Sentry: step by step should be updated tomorrowThose are nice, and good to have step by step pics. I again started to mess with the tools and planning scales. Hardest part was to locate correct size riverts and first layers (specially screw driver / opener layer was quite tight to set up). Now used original scales still:

-
Pics tomorrow I pomise... Tore an ebay Swisschamp apart today, removing the metal saw and fish scaler layers. Basically made an Explorer with wood saw, which I am sure has a name I'm not familiar with. Was going to make a Yeoman with saw, but the Champ's opener layer is where the lanyard attachment point is... This could become fun. And expensive... Brass rods incoming, brought my vise, hammers, and dremel home from work on Friday. 1x30 belt grinder coming home this week. Trolling for more donors...
Edit- Pliers came out too... duh. :)
-
Pics!

No going back now...



A few layers in.



-
Nice one.

-
I did continue to next slim scissor prototype. Added layer but still quite slim:


Getting to be close to get friend for supertool. Vic "leather". Though don't know how well leather will last on scale.
-

I've tried to keep this vaguely period correct with an older Explorer - thicker blade with plain liners, keyring on the small blade spacer, grooved corkscrew, grey mag/longer phillips, screwed scissors with no hook and gen II pliers. The order isn't how Victorinox would do it though, I've swapped the pliers and phillips/magnifier layer to make the phillips easier to use. -
-
@temo said:
I did continue to next slim scissor prototype. Added layer but still quite slim:

Getting to be close to get friend for supertool. Vic "leather". Though don't know how well leather will last on scale.
I'd be most afraid of what will happen to those rivets. The risk seems high that they'll cut into the leather and you'll start getting play in the tools.
-
Yes it will not be long life solution. Leather glued and rivets go quite much through leather. I did leave just scissors and use until have time and idea to make better scale..

-
@hiraethus said:
Troubleshooter:


All latest-generation parts, no keyring, fine driver instead of the chisel on the file, and a nail file on the hook.Veeeeeeeeerrrrrrry nice H - gotta get one of those hooks one day.
-
Thanks M. Syph very kindly sent me a couple a while back.

-
Just out of interest, why no lanyard ring?
-
I've come to the conclusion that they just get in the way, particularly when using the small blade, on the smaller knives. I do use the keyring for bigger knives to clip it to a pocket dangler but prefer the feel of the knives without them.
-
@temo said:
Yes it will not be long life solution. Leather glued and rivets go quite much through leather. I did leave just scissors and use until have time and idea to make better scale..
What about stabilizing leather in epoxy resin? (either a kind of leather micarta or leather inclusion in resin)
-
Epoxy resin could be one thing to test. You could put other then leather inside as well (insects etc..) But yes could work. Edges from leather at least handle with some stuff.
-


Original scales had trouble to stay place with mod riverts so did scales from chopping board. Ice blue mod. Not the winner of beauty contest but quite okay to handle.
-
Finished this one with an inline awl. The awl had a broken tip, so I had to shorten it a little.
Also working on GAK rebuilds. Top row is all VIC with new blades except for one.
Bottom row are mix-and-match rebuilds of other brands...two Adlers, Aitor and a B&H. Still have a pile of them to work on...mostly ICARs


-
@Spork, Lord of Lime Jello! said:
Finished this one with an inline awl. The awl had a broken tip, so I had to shorten it a little.Also working on GAK rebuilds. Top row is all VIC with new blades except for one.
Bottom row are mix-and-match rebuilds of other brands...two Adlers, Aitor and a B&H. Still have a pile of them to work on...mostly ICARs
That's nice Spork,looks like a real workmanship SAK

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



