All positive tools review
-
Let's go back in time. Years and years ago I did think would I need new multitool. XE6 had quite much all the tools needed from multitool. Locking blades were in list for a long time. But it was not enough to get a new MT. Have to say I did look a lot of features thinking could this be it, tool I would have to have in multitool. Finally it did hit me. Chisel was the tool I have to have in MT. And at same locking blades. And tool that has those was spirit.

And have to say tool overall and chisel have had plenty of use. Still after long time I value chisel the most in spirit. And that is also why I like victorinox as general. There are tools those are not specific tools but combination tools. And ideas to fit features to existing toolset. And this chisel is a good example from that. It is not just a chisel. Though some tools are okay to leave as specific tools as well. Also the other point, locking blades, was the reason to this purchase. And in that area as well spirit has been great.
-
Nice to see these shorter summaries that are all about positive features

-
Thanks for sharing your thoughts Temo.

-
Thank you. Yes you can think what you have as well what you do not have. Started to think why I do not have one tool. But actual reason might be that there are good features in many tools. Different reasons why I swap tools every now and then. I don't see myself as collector as I quite much use tools I have. Just over the years have time to use many tools.
Keychain tools. I had need for a small pliers because one hobby. Lucky tool I got was squirt P4. That I did change to PS4 later. First keychain tool I started to carry all the time with keys. Main reason as it is size of the keychain. And still it has tools I often use. Main reason were pliers but after carried, I have used other tools quite plenty as well. Example change batteries to toys, open packages, file, cut etc. It is not a large tool so need to be a bit careful what jobs to do with it. After pliers most used tool has been flat philips. It just has to be flat when size is top priority. Still it has been very functional. It took me a while until did find small attachment to keys I could remove. Usage is much more handy when you can remove keys when use the tool.

So topmost like is a small compact size. Nice spring loaded pliers. Set of tools can be handy in tasks at hand. I could say same then often told with mobile cameras. Best camera is the camera that is with you when you need it. So best tool is the tool you have when have the need. With squirt I have done many small things without postpone to time have the tool or go get the tool somewhere. Also with more heavy duty tool on belt or pocket, still small tool is more handy for small things.
-
I would say Gerber fit is flashlight with tools. And light with normal aaa battery. There are two small screw drivers (small flat and philips), bit adapter where double side bit (flat and philips), knife and scissors. Lock for bit adapter, knife and scissors. So bit driver bit is longer as double side bit with tool. I think picture will tell positive thing with this:

So I would say a good choise for a handlight. Light is quite bright but not too bright. Nice tool example to car. Where you might need light, scissors and knife (open some snack packages when come from shop etc). And places you might need a light, might have need for some tools as well. With this these are in same package. My need for this is mainly car tool. Light is good to search items from car floor or as shown in picture, screw in dark etc.
-
Victorinox handyman. I could maybe write many pages why got that years ago. And that is the thing with SAK. It won't go old. Models have changed over the years. With victorinox basic concept with pocket knifes has been quite same. Then with models extra features and combinations are different. There is a fact that some basic tools are handy. Need for those has not changed. Can opener, bottle opener, knifes, screw driver which can help with other tasks then screw tasks as well. And victorinox is a strong brand with pocket knifes so quite clear at some point person into tools will get to know models or look different models. And with vic, bigger knife gets, more tools there are. So why did I end up with the handyman? It is quite much size versus amount of tools question.

I am not handyman but like to do things handyman does. And I have to say it is quite perfect hobby knife. If you build models, RC etc etc. Just the knife to help you with all kinds of small things. I had this a long before swiss tool. And then like with swiss tool, chisel was a one thing I liked to have. Small pliers were other. Again I did compare quite much to swiss tool. Which have same features and more. But I was happy what handyman did offer. And been happy for a long time. Still today it would be top of the list what I would choose. One good to have feature have been bit driver in cyber tools. So next step would be swiss champ xlt. But again, I am still happy to tool selection handyman has.
Again what comes to quality, it has been great. I have used it plenty and all tools are like new. Though it has not been carry item but more like a hobby tool (carried sometimes but not plenty). And tool with the small tasks. I have not used it in heavy duty tasks. When working with small things, small tools are handy. And that is what handyman is for me.
-
What are multitools for? I see main advantage that those are carried. That does seperate those from normal tools. Small tools are easy to carry in pocket or with carabiner etc. But one important option for me is sheath. You carry tool a lot, much more then actually use the tool. So for me easy carry is almost as important as tool itself. For me best option to carry is original sheath:

Those are designed for tool. Fit is good. Most are designed for belt carry but I use often in pocket carry as well. And for belt carry there are some different options. Clip style can be used in pocket carry as well though it is not so secure in belt carry.

Again there are different options what sheath carry. Some are good fit for tool only and some are ment to carry extras as well:

I mostly like exact fit and that part is good in all original sheaths I have. As those are designed to carry specific tool. Also example victorinox spirit plus sheath is designed to carry plus set so fit for all tools is great there. Leatherman has good solution to carry tool and one slide from the bit set. Swiss army knives are often sold without sheath but at least for bigges knives there are sheaths. And fit is good in there as well. So as general with bigger tools I see sheath is a must and different options are a plus. I personally prefer buttons and leather sheaths but others have they positives as well. To mention some of the best for just tool carry are juice sheath with XE6, super tool 300 sheath and red SAK sheath. And spirit plus sheath is again best example from tool plus set carry. Again best for me might not be best for you so people prefer different things.
-

Big fan of sheath carry myself and I too prefer the leather and button type sheathes.
-
Yes you can reason what you need. But at the end seems I carry what I like to carry. Example after SAK sheath (that looks like belt carry medikit..) my SAK carry time did increase a lot. Just feels good to carry. Again super tool 300 sheath is so good that ST300 has been most carried tools. As well juice sheath. Though clip design has made tool drop some times example in car. But again it is fast insert to belt or to pocket.
-
Once you have some tools, those will serve for a long time. You might get many tools and rotate those. But basically most multitools has basics and some extra that might be the reason you get the tool. If you carry multiple tools, you get multiple same tools as well. Though different size tools might be good even tools are same. Example small pliers for small things, large pliers for larger things. But as point, I rarely carry similar tools. I sheath carry large tools and often have just keychain tool in pocket. Well pocket tools are the thing to change that. And what did I choose for a pocket tool? I can start saying I have had piranhas in aquarium. So clearly pocket tool is piranha:

So it is a piece of steel. Sometimes that is all you need. Piranha have very sharp teeth but in leatherman piranha there really is nothing really sharp. And so it must be in pocket carry. Else you would need cover or break pocket or fingers. Still there are edges those are useful in many situations. Wrench is also nice even not as good as fixed size example in ueli steck. But there are more size options. So it is good to hold bolt and do minor screwing tasks. It is great to open cans from beer to paint cans. At pocket it is fast. Just pick up and use. Also bit holder is good addition. I have used just bits sometimes. So with piranha you can easily add torque. From price everybody can have they opinion. You can use much more to steel ring or get some piece of steel with lower price. With items I carry I think price was fine. Quality is good for carry purpose and pocket tool purpose. For home need I would look cheaper tool.
So far usage is been mostly opening cans. And other opening tasks. Clear plus is easy to use. Just take and use. I have to admit that at first I did not see pocket tools very useful. But after some thinking and now using I have changed my opinion. And also I used pocket knife to many things before. Piranha is better many times as you don't need to ne careful with knife blade. So no need to use blade with the tasks you don't need a blade. And knife will thank you. Also in some tasks you don't even want a sharp blade. As example knot untier. But also many other tasks. Tasks as simple as scratch your back.
-
Nice. Very helpful thank you

-
Need to add mention from victprinox alox, pioneer here. If I do not count keychain, it is most carried items in my pocket. So light it easily takes place from bigger tools. Still blade size is a little more then normal vic. Though new models and bigger series has bigger though then those are not as small to pocket carry anymore. So for me pioneer is close to optimal use / carry compromise. For thin solution selection of tools is small. All inline tools what I like. As well all non locking blades. Minimised weight and thickness. And great quality. Basically you can do a lot with the blades. Good inline awl is a big plus for me.

So all tools proven in practise, basic victorinox. Nothing fancy, all just works. Nothing you can loose. Easy to carry. Confident this will get carry time and usage for a long time.
-
Pioneer, certainly one of the more amazing tools
-
Reviewer badge is for main site reviews only sorry.
We are looking for main site reviews so see the sticky thread above for an idea of what is required.
If you have any questions just ask. -
No worries. I actually use mostly mobile app so took a long time before did search what are those badges people are talking about :) Maybe some day look more carefully. Anyway nice idea.
-
Flat philips was already mentioned with squirt. Similar is found from micra as well. Main tool in micra is scissors. And even micra is keychain, I could say scissors in micra are more heavy duty then most scissors in multitools. And in my list there are many tools without scissors (ST, ueli, pioneer..) So scissors in keychain are good to have. And sometimes good to have a bit more heavy duty scissors like ones micra have. Example cutting sticky plaster may be challenge to very small mt scissors. For micra there is no challenge to cut bandaid or similar tasks.

There are also other useful small tools. And often small tools are more handy in small keychain size tool. And scissors show that there can be also more powerful tools in keychain size. Those compete with larger tools and do well.
-
Like

-
Seems not added two most carried tools at the moment. Rebar and freestyle. I'll start with freestyle (cx).
From this there are several opinions (well maybe from most tools there are..) I had this for long time before started to carry more. Well hard to see this as multitool. More like bitool (knife and pliers). But those are actually tools you can use a lot. Compared to skeletool this misses drivers and carabiner. Making this more compact and light tool. And that is important reason why like to carry this. Light, compact, small. And cx model has non serrated blade which I like.
I have carried this with squirt ps4 which has basic drivers I can use in need. Also think this would make perfect pair for LM tread. That I don't have. But that would have a good set of drivers and this would add pliers and knife.
Biggest limitations may be that this is a light tool. But again that is a reason like to carry so can't have all (heavy duty that is light to carry).
To be honest I have been thinking to get skeletool. There would be added drivers. But after thinking more I could like this and tread combo more. I have noticed I don't carry bit sets. And as random carry where need for more drivers I might prefer more heavy tool. So as daily carry I am okay with keychain drivers. At repair tasks etc I take more heavy tool.
So shortly for me this is quite much perfect edc when paired with keychain or maybe with tread. And step to heavier carry there comes rebar. That is still in pocket carry limits for me. But with rebar I already like belt option.
From this it is hard to say best feature as knife and pliers are quite as important. So maybe best thing is good combo of two important tools. And there is that, no other secondary tools. So pairs up nicely with tools those could use pliers and knife as addition. But as single as well can be helpful in many tasks.


Sent from my VIE-L09 using Tapatalk
-
Rebar is small version from super tool 300. I had ST300 at first. And yes I did think as well that smaller version would be great. And that game out from Leatherman named rebar. And basically you don't loose anything against ST300. But is that a full fact? Well have to say no. Rebar is probably most light tool with pliers I would count heavy duty pliers.
Have to be honest that I like to use st300 more. It just has stronger and more stable feeling when using. But can't really say I could do more heavy tasks compared to rebar. It just feels slightly better doing the tasks. But also feels more when carry. So rebar you can already pocket carry. Where ST feels a bit too much in pocket. Though rebar is not small tool either. So for me just in limit being large enough to be usable tool in heavier tasks as well. And small enough that can be carried even don't know having need for tools.
For me best thing about rebar is that it game out. Else I would be wanting something like ST but smaller. And for me it is more edc friendly version of ST.
Would I choose ST300 or rebar? Too hard call and that is probably reason I have both. With rebar and ST you can say the difference using the tool and carrying the tool. It is a compromise, gain other and loose other. Though people with smaller hands might find rebar as better in use. But for me rebar gets carry point and ST usage point. And mainly carry point comes about possible pocket carry. At belt I don't mind ST larger size much.
From size I think we are still missing one Leatherman between micra and rebar. Medium size original LM style version. From that point of view rebar is more like small ST then medium size tool.

Sent from my VIE-L09 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
