Show off your Sak mod's!
-
Did you thin down the spacer under the blade tip since the awl is a bit thicker than small blade? I did this on the ones I built, but Im not convinced it was necessary.
-
-
Very nice!
-
Nice!
-
@hiraethus said:
Black and red Pioneer, with scissors added and pen blade in place of the can opener.


Hand made brass liners and small blade spacer. Note poor finish on edges of scale; thanks Victorinox. ::)Nice work! Did the pen blade drop right in place of the can opener with no mods? Is it one from a 91mm?
-
Thank you! Other than drilling the pivot to 3mm and bending the blade inwards to clear the cap lifter it's as standard on the 91mm knives.
-
@hiraethus said:
Thank you! Other than drilling the pivot to 3mm and bending the blade inwards to clear the cap lifter it's as standard on the 91mm knives.Could you describe how you go about bending a blade? I'm scared i'll snap it.
-
I just grip the blade in soft jaws in a vice so only the tang sticks out then gently bend the tang with some pliers. I do worry about them snapping but the Vic steel is quite ductile.
-
@hiraethus said:
I just grip the blade in soft jaws in a vice so only the tang sticks out then gently bend the tang with some pliers. I do worry about them snapping but the Vic steel is quite ductile.Yup the blade tip can break off, but if beding form the base youd have to bend like 45 degrees to get it to snap. I have tested springs and they will bent 90 degrees without breaking.
-
Finished my Woodsman project...

-
-
Thats just nice!

and I really like the black and brass of the one above

-
@Sparky415 said:
Thats just nice!
and I really like the black and brass of the one above

+1
:D
JR -
Thanks chaps.

-
Very nice

-
This is my custom TI explorer made by Syph and further customized by me. I love this tool and I have carried and used it daily since I got it almost 6 months ago despite having a pretty decent collection of SAKs available to use.
-
@Psych said:
This is my custom TI explorer made by Syph and further customized by me. I love this tool and I have carried and used it daily since I got it almost 6 months ago despite having a pretty decent collection of SAKs available to use.Very cool. What did you use to dye the plastic parts? And did you take the whole thing apart for that?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
I'll have to take another photo of the blades closed later...



