Show off your Sak mod's!
-
@Spork, Lord of Lime Jello! said:
Finished this one with an inline awl. The awl had a broken tip, so I had to shorten it a little.
Also working on GAK rebuilds. Top row is all VIC with new blades except for one.
Bottom row are mix-and-match rebuilds of other brands...two Adlers, Aitor and a B&H. Still have a pile of them to work on...mostly ICARs
Lovely Spork! Out of interest (as I'm about to embark on a mod myself) did the awl drop in ok as it is?
Looking forward to pics of the Woodsmen - my fave SAK!
Spring tension is good...walks and talks. I was a little bit apprehensive because of the slightly larger pivot hole and the tang seeming to be a hair thicker, but it seems to work.
-
Thanks.

I see you have set it in behind the cap lifter - does the edge of the awl sit on the cap lifter nicely? Do you have any more pics? Sorry for al lthe questionsbut it's been an ambition of mine to do this for a while. Great to see you've done it!
-
It's in the normal position in lieu of the pen blade. I think the reflections in the photo make it look reversed
I'll have to take another photo of the blades closed later... -
Ah. That makes sense! It does look deceptive in the picture. Thanks again.

-
@Spork, Lord of Lime Jello! said:
@Spork, Lord of Lime Jello! said:
Finished this one with an inline awl. The awl had a broken tip, so I had to shorten it a little.
Also working on GAK rebuilds. Top row is all VIC with new blades except for one.
Bottom row are mix-and-match rebuilds of other brands...two Adlers, Aitor and a B&H. Still have a pile of them to work on...mostly ICARs
Lovely Spork! Out of interest (as I'm about to embark on a mod myself) did the awl drop in ok as it is?
Looking forward to pics of the Woodsmen - my fave SAK!
Spring tension is good...walks and talks. I was a little bit apprehensive because of the slightly larger pivot hole and the tang seeming to be a hair thicker, but it seems to work.
Ya I thought the same, but the slightly oversize hole didnt seem to matter. Vic does the same when they add the eblade and pruner to the xlt's and bigger ones.
Im sure I have extra new awls from 93s if anyone is needing any for mods. I did 93mm mods for years and lots of them had small blades or other in place of the awls, so I ended up with many spares.
-
Did you thin down the spacer under the blade tip since the awl is a bit thicker than small blade? I did this on the ones I built, but Im not convinced it was necessary.
-
-
Very nice!
-
Nice!
-
@hiraethus said:
Black and red Pioneer, with scissors added and pen blade in place of the can opener.


Hand made brass liners and small blade spacer. Note poor finish on edges of scale; thanks Victorinox. ::)Nice work! Did the pen blade drop right in place of the can opener with no mods? Is it one from a 91mm?
-
Thank you! Other than drilling the pivot to 3mm and bending the blade inwards to clear the cap lifter it's as standard on the 91mm knives.
-
@hiraethus said:
Thank you! Other than drilling the pivot to 3mm and bending the blade inwards to clear the cap lifter it's as standard on the 91mm knives.Could you describe how you go about bending a blade? I'm scared i'll snap it.
-
I just grip the blade in soft jaws in a vice so only the tang sticks out then gently bend the tang with some pliers. I do worry about them snapping but the Vic steel is quite ductile.
-
@hiraethus said:
I just grip the blade in soft jaws in a vice so only the tang sticks out then gently bend the tang with some pliers. I do worry about them snapping but the Vic steel is quite ductile.Yup the blade tip can break off, but if beding form the base youd have to bend like 45 degrees to get it to snap. I have tested springs and they will bent 90 degrees without breaking.
-
Finished my Woodsman project...

-
-
Thats just nice!

and I really like the black and brass of the one above

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




