And so it begins.... (My adventures into Alox!)
-
First time poster here. Been lurking for a few months, checking in regularly following Syph007's work. Absolutely phenomenal ingenuity and craftsmanship.

-
@tankerG said:
First time poster here. Been lurking for a few months, checking in regularly following Syph007's work. Absolutely phenomenal ingenuity and craftsmanship.
Thanks for the kind words and welcome to the forum!
I'm working on the brass mag holders today. So far so good. I dont have an allen key small enough for the set screws I bought though, so I have to go hunting for smaller ones now.


-
Nice to see the progress, I'm looking forward to the end result.
-
I need a 0.035" wide hex key, which is smaller than all the local stores carry, so I had to order a precision set off amazon. Another thing I have to wait for.. but at least I have everything else I need and I just test fit the lens and its perfect.
-
First time poster here. Been lurking for a few months, checking in regularly following Syph007's work. Absolutely phenomenal ingenuity and craftsmanship. :2tu:
Thanks for the kind words and welcome to the forum!
I'm working on the brass mag holders today. So far so good. I dont have an allen key small enough for the set screws I bought though, so I have to go hunting for smaller ones now.


I know you like quality stuff so I highly suggest getting the Wiha brand. I have both sets and they are amazing.
I believe they sell them at Home Depot. If you cannot find those Bondhus is the next best in my opinion. They can also be found at Home Depot.
-
@Syph007 said:
I need a 0.035" wide hex key, which is smaller than all the local stores carry, so I had to order a precision set off amazon. Another thing I have to wait for.. but at least I have everything else I need and I just test fit the lens and its perfect.The Wiha metric set has one size under what you need as well. Goes down to 0.028.

I know you already ordered a different set, but just in case.
-
@captain spaulding said:
I need a 0.035" wide hex key, which is smaller than all the local stores carry, so I had to order a precision set off amazon. Another thing I have to wait for.. but at least I have everything else I need and I just test fit the lens and its perfect.
The Wiha metric set has one size under what you need as well. Goes down to 0.028.

I know you already ordered a different set, but just in case.
I checked lowes and home depot but they didnt have sets that went small enough. I might just go see if I can mill/grind a tiny drill bit or something to see if I can make a good nuff one for now just so I can get one finished.
Im sure more then a few people would go for a steampunk yeoman/explorer or similar. :D
-
@captain spaulding said:
I need a 0.035" wide hex key, which is smaller than all the local stores carry, so I had to order a precision set off amazon. Another thing I have to wait for.. but at least I have everything else I need and I just test fit the lens and its perfect.
The Wiha metric set has one size under what you need as well. Goes down to 0.028.

I know you already ordered a different set, but just in case.
I checked lowes and home depot but they didnt have sets that went small enough. I might just go see if I can mill/grind a tiny drill bit or something to see if I can make a good nuff one for now just so I can get one finished.
Im sure more then a few people would go for a steampunk yeoman/explorer or similar. :D
Indeed. Steampunk Yeoman would/will be an insta-hit!
-
@captain spaulding said:
I need a 0.035" wide hex key, which is smaller than all the local stores carry, so I had to order a precision set off amazon. Another thing I have to wait for.. but at least I have everything else I need and I just test fit the lens and its perfect.
The Wiha metric set has one size under what you need as well. Goes down to 0.028.

I know you already ordered a different set, but just in case.
I checked lowes and home depot but they didnt have sets that went small enough. I might just go see if I can mill/grind a tiny drill bit or something to see if I can make a good nuff one for now just so I can get one finished.
Im sure more then a few people would go for a steampunk yeoman/explorer or similar. :D
That's a bummer. My Home Depot has them unless I am not thinking correctly.

-
Success!!
I just ground a small bit I had to make do, and it worked ok to turn the set screw. I love this solution. The only thing I would add now is a tiny bit of rubber or similar in the hole so the screw isnt pushing on the glass directly but pushing a small plug of plastic or rubber.
Now of course I have to test is on an actual SAK, but Im optimistic it will work out just fine.









-
Mmm shiny... [emoji41]
-
Looking good
-
Those are AWESOME!!!!!!

-
-
Nice to see the progress steps. Great job!
And while I also love the shiny, I do look forward to some patina on it.
-
Sweet!
How do you figure the wear against the back spring will be? I know the OEM mag holder was plastic, but - with this brass one being so cool - I'd expect alot more usage out of it! :D
-
That looks great Syph....and tempting :ahhh
Sent from my SM-G920R4 using Tapatalk
-
That looks great Syph....and tempting :ahhh
Sent from my SM-G920R4 using Tapatalk
do I see another upgrade in your future?
Syph's an evil tempter [emoji48]
I just got them back, so I think my wife wouldn't be too pleased if I tried to get more work done ;)Sent from my SM-G920R4 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login