Darkpsyche's FEBRUARY CHALLENGE MT.O CYBERTOOL thread
-
Thanks!
@pettydroid said:
Nice pic layout. B&W and minimalist. -
@darkpsyche said:
Straight from the motherland, I'm jealous!
Starting off the weekend with a cold one

Sent from my SM-G900V using Tapatalk
Ah, nice! That reminds me to drive to Germany soon to pick up some crates of Becks! :D
I live 20 miles from the german border, so I go there regularly for beer (mostly Becks and 'special beers' like IPA's), whisky etc. Its much cheaper there because the tax on alcohol is much lower than in the Netherlands.
-
@darkpsyche said:
Day 7: making new friends - The TS100 soldering iron!
Used the Cybertool to screw in the soldering tip.
Sent from my SM-G900V using Tapatalk
That soldering iron totally looks like it belongs together with your CT!
-
Can you talk us through your additional bits and the o-rings?
Do you find you use them regularly? Over the included bits?I carried my CT29 yesterday and actually got good use out of it. Fixed a door with a Philips (nice reach could not do with can opener) and adjusted a friends knife pivot with the Torx.
-
Nice!
Straight from the motherland, I'm jealous!

Starting off the weekend with a cold one

Sent from my SM-G900V using Tapatalk
Ah, nice! That reminds me to drive to Germany soon to pick up some crates of Becks! :D
I live 20 miles from the german border, so I go there regularly for beer (mostly Becks and 'special beers' like IPA's), whisky etc. Its much cheaper there because the tax on alcohol is much lower than in the Netherlands.
-
They shall be BFFs, till the day victorinox includes a soldering iron in one of their models!
Day 7: making new friends - The TS100 soldering iron!
Used the Cybertool to screw in the soldering tip.
Sent from my SM-G900V using Tapatalk
That soldering iron totally looks like it belongs together with your CT!
-
Sure, the double sided bits are from a screwdriver kit, if you google "30-in-1 Extendable Flex Shaft Precision Screwdriver Set" you can find several.
The O-rings are from metricscrews.us, the specific part is: Rubber Washer 2mm ID x 4mm OD x 1mm CS (10532)
I also have 4 small magnets glued in the driver socket and in each bit holder.
The bit case is from an old radio shack precision bit driver kit.
@shark_za said:
Can you talk us through your additional bits and the o-rings?
Do you find you use them regularly? Over the included bits?I carried my CT29 yesterday and actually got good use out of it. Fixed a door with a Philips (nice reach could not do with can opener) and adjusted a friends knife pivot with the Torx.
-
.
-
Day 9: Finally got to use the pin tool! Needed to stop a computer fan to test if the sensor was working, blocked by a grate.
Also used the driver for some euro connectors.


Sent from my SM-G900V using Tapatalk
-
Your thread is really making me want to have a Cybertool!

-
Day 10: A bit of a comparison with its bigger brother, ct34


Sent from my SM-G900V using Tapatalk
-
It's definitely worth having one, especially if you tinker with electronic devices!
@glenfiddich1983 said:
Your thread is really making me want to have a Cybertool!
-
Day 11: vday prepping

Sent from my SM-G900V using Tapatalk
-
Mmmm knob creek. Good choice
-
Day 12: helping around at a dinner party

Sent from my SM-G900V using Tapatalk
-
@darkpsyche said:
Day 12: helping around at a dinner party
Sent from my SM-G900V using Tapatalk
You must really like that IPA
-
Day 13: Greek Saturday, gundam (japanese robot) ditches rifle for cybertool


Sent from my SM-G900V using Tapatalk
-
I sure do!
Day 12: helping around at a dinner party

Sent from my SM-G900V using Tapatalk
You must really like that IPA
-
Day 14: used the awl, Philips and can opener driver to install a paper towel holder

Sent from my SM-G900V using Tapatalk
-

Toothpick finally had its use! Used it to clean the groves within
Now for the weekly update!
Main Tools
Small Knife:
Driver:
Cap Opener:
Large Flat Screwdriver:
Wire Stripper:
Small Flat Screwdriver:
Can Opener:
Mini Flat Screwdriver:
Corkscrew:
Awl:
Large Knife:
Scale Tools
Pen:
Tweezers:
Toothpick:
Pin:
11/15!
Sent from my SM-G900V using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login