Show off your Sak mod's!
-
@hiraethus said:
I just grip the blade in soft jaws in a vice so only the tang sticks out then gently bend the tang with some pliers. I do worry about them snapping but the Vic steel is quite ductile.Yup the blade tip can break off, but if beding form the base youd have to bend like 45 degrees to get it to snap. I have tested springs and they will bent 90 degrees without breaking.
-
Finished my Woodsman project...

-
-
Thats just nice!

and I really like the black and brass of the one above

-
@Sparky415 said:
Thats just nice!
and I really like the black and brass of the one above

+1
:D
JR -
Thanks chaps.

-
Very nice

-
This is my custom TI explorer made by Syph and further customized by me. I love this tool and I have carried and used it daily since I got it almost 6 months ago despite having a pretty decent collection of SAKs available to use.
-
@Psych said:
This is my custom TI explorer made by Syph and further customized by me. I love this tool and I have carried and used it daily since I got it almost 6 months ago despite having a pretty decent collection of SAKs available to use.Very cool. What did you use to dye the plastic parts? And did you take the whole thing apart for that?
-
This is my custom TI explorer made by Syph and further customized by me. I love this tool and I have carried and used it daily since I got it almost 6 months ago despite having a pretty decent collection of SAKs available to use.
Very cool. What did you use to dye the plastic parts? And did you take the whole thing apart for that?
I did take the whole thing apart. To dye the plastic parts, I made a double boiler and boiled Fiebing's black oil dye with the plastic pieces immersed for several minutes. It is unnecessary to take the lens out of the magnifying glass. I attempted this with spare parts first because it took me a few tries to get the timing worked out so that plastic mag glass holder didn't warp or crack. Once the technique was perfected, the results were great and the dye actually absorbed into the pores of the plastic, so it will not come off. The mini screwdriver was much easier to dye. Just as a warning, there's some pretty nasty fumes that come off of the dye when it boils and the dye is flammable, so of course I would not recommend you do this process and I am not responsible for any damages or injuries that may occur from any such attempt.
-
Here's my first SAK mod, nothing spectacular but we've all got to start somewhere.
Waiter to Apprentice

Cheers
Jon
-
Great place to start Jon - nice mod. Given the success of your first try are you tempted to do anything else?
-
@magentus said:
Great place to start Jon - nice mod. Given the success of your first try are you tempted to do anything else?Yeah I definitely want to try something else, not sure what yet, preferably something else easy and cheapish. A compact with the Phillips mod looks like it would be pretty useful too. Eventually I'd like to do something like a Huntsman but with pliers instead of scissors if that's even possible?
Cheers
Jon
-
It's very possible. If you get hold of a Champ or a Swisschamp you can remove the layers you don't want and re-peen it using the same pins. Quite an easy process (as long as you don't screw up and/or lose the bushings) ask me how I know.

-
@Jon said:
Yeah I definitely want to try something else, not sure what yet, preferably something else easy and cheapish. A compact with the Phillips mod looks like it would be pretty useful too. Eventually I'd like to do something like a Huntsman but with pliers instead of scissors if that's even possible?Since you're in the UK the DofE model is readily available - that's almost a compact with phillips, if you don't mind the round-nosed blade. Someone recently posted a nice re-profiling of the blade to a sheepsfoot shape, I can't find the post at the moment though.
Huntsman with pliers instead of scissors (or Camper + pliers if you prefer) would certainly be possible. As far as I can tell, that combination has never been a standard model so it would be an interesting mod. The Motorist is the nearest former production model that combines pliers and wood saw I think, but that also has the scissors.
-
@magentus said:
It's very possible. If you get hold of a Champ or a Swisschamp you can remove the layers you don't want and re-peen it using the same pins. Quite an easy process (as long as you don't screw up and/or lose the bushings) ask me how I know.
Handyman would also be a good starting point, a bit cheaper than a SwissChamp but you don't get the plus scales.
-
Was my first mod jon
although not done any since
good luck with future mods 
-
Ok, finally got a chance to work on my sak Zermatt sheaths/pouches, since the wife is home and the kid is in school. I'm just about half way done, and the wife falls asleep for a nap.. I'd keep going but the next step is to put holes in the flap like the one in the background, and that requires the Dremel, and well, that makes noise and I don't want to wake her,, I could use a punch, but that's too much work, beside I shouldn't be doing anything without supervision. So I guess the timing was right on..
Here's a few pics, sorry their not the best..
The kids soon to be deadpool setup on the left and my idk what to call it, who's black and blue? I can't wait for the scales to get in, my sak will have blue scales, and the kids will have one red and one black,,
JR

-
Ok, got a little time again today to work on the pouch/sheath, didn't finish both but both got drilled out, and the one did get finished! I ran into a few problems, like for some reason they were so dry they were cracking so I gave them a little tlc, and since they were dry as I drilled them I had stuff piling up and had to remove it before moving on to the next hole. I didn't have this last time on that other sheath you see in the pic.. Anyway here's a pic, you can see both drilled out, and then the blue one finished. I did come up with a name, who else is a marvel comic and is blue?? Come on,, he's an X-man? I'll give you a hint, he's big, just like the champion+ that's going in this sheath..
JR

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


