What Did You Use Your Multitool For Today?
-
Used my Swisstool x to fix my opel corsa windscreen wiper s because they would not park in the right position. This was caused by a copper pin that did not touch the metal disc anymore that lets the motor know when it is in the right position.
I bent the pin a little bit with my Swisstool pliers and it worked great again.I also resharpend my 70 cent flea market axe with my Swisstool file.


-
I used the Signal to cut and fit a couple replacement windscreen wiper blades so the vehicle would pass inspection.
-
accidently TIG welded on my swisstool's pliers, heat treatment is probably ruined in the tip of the plier. :-
And yesterday i had to cut sandpaper with my Swisstool's scissors. But i have sharpened them back to razor sharp again.
Also have welding spots all over the handles and a large burning spot on the blade.Is there a: don't buy a used multitool from this guy badge? :D

-
fixed a freakin' table with the Spirit.
-

Used LM bit set and ST to open BD drive from PS3. There was need for one special bit as well which I had.
-
I tightened the handle yoke on a Radio Flyer red wagon. I used the big flat blade in the red Huntsman while holding the nut on the other end with the Rebar pliers. I'll be working for the next 7 weekends, President's day, and 1 school day at the Florida Renaissance Festival at Quiet Waters Park in Deerfield Beach and I'm sure there will be a lot of that sort of thing.
-
-
Rebar to get a light bulb base out of a ceiling light
-
Used the Signal to install window locks. :) Switch Plier 2 was too small and the BlackTip to awkward. ::)
-
Used the large flathead on my swisstool to unscrew the draining cap so i could drain the coolant from my car. After that was done i could start replacing the distribution chain. unfortunately there are more tools required for that job than my trusty swisstool.

-
Used the wave to hang two pics, the flat blade removed the staples from the cardboard corner protectors and the Phillips drove in the screws fairly easy. Saved me a trip to the basement.

Sent from my SAMSUNG-SM-N920A using Tapatalk
-
My og wave saw see a little use this afternoon when during a horse ride à falling tree was on our path. I cut 6cm large branchs to clear a path for our horses.
Ans the blade was usefull to make a hole on my new saddle bag. -
I used the awl and blade on my Vic Soldier to open up things at a party last night.
-
Used my Delica to help peel sun deck off a Nautique

-
Trimmed my nose hair with my swisstool

No picture this time guys :D -
Used my Delica to help peel sun deck off a Nautique

Why?
Had to take the flip up off and the non skid covers the hinge screws. Gel coat work was needed.
-
Used my Gerber MP600 Pro Scout to do some work on a couple gate operators: Phillips screws, knife to cut the box away, gripper to loosen the bolts holding the enclosure on.
-
Peeled an Apple with my Swisstool


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
