What Did You Use Your Multitool For Today?
-
Used the large flathead on my swisstool to unscrew the draining cap so i could drain the coolant from my car. After that was done i could start replacing the distribution chain. unfortunately there are more tools required for that job than my trusty swisstool.

-
Used the wave to hang two pics, the flat blade removed the staples from the cardboard corner protectors and the Phillips drove in the screws fairly easy. Saved me a trip to the basement.

Sent from my SAMSUNG-SM-N920A using Tapatalk
-
My og wave saw see a little use this afternoon when during a horse ride à falling tree was on our path. I cut 6cm large branchs to clear a path for our horses.
Ans the blade was usefull to make a hole on my new saddle bag. -
I used the awl and blade on my Vic Soldier to open up things at a party last night.
-
Used my Delica to help peel sun deck off a Nautique

-
Trimmed my nose hair with my swisstool

No picture this time guys :D -
Used my Delica to help peel sun deck off a Nautique

Why?
Had to take the flip up off and the non skid covers the hinge screws. Gel coat work was needed.
-
Used my Gerber MP600 Pro Scout to do some work on a couple gate operators: Phillips screws, knife to cut the box away, gripper to loosen the bolts holding the enclosure on.
-
Peeled an Apple with my Swisstool


-
I was very easy with her

-
Did some maintenance on my camp stove. The little tool included with the stove is great but nothing like having a good set of pliers.

-
Today I used my Spirit RT to help a friend put together a dresser.
-
Used the Swisstool's small flathead screwdriver to get the batteries out of the remote.

-
Fitting carpets today,used the Phillips too undo my knife to change the blade,and the pliers to pull up the old carpet


-
Swisstool X to remove generator carburator, peel an apple, sharpen my axe and open a bag of bread.
-
I used my Rebar's larger flat head to scrape gum from under my seat, that was a nasty surprise...
-
Been putting in warehouse racks, im on the forks

-
@NKlamerus said:
Been putting in warehouse racks, im on the forks
Doesn't look like an OSHA approved method for using a forklift as a manlift. :ahhh
Remember, Safety first!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login