Possible DIY tool coating
-
I'm with those two :D

-
At the risk of being derivative....

-
Doesn't look like that stuff is available here in the States.
-
@SteveC said:
Doesn't look like that stuff is available here in the States.I got it at Home Depot while looking for a tube of dry graphite lubricant like this:

It was only because that stuff wasn't available that I decided to try the spray can.
I had a few minutes this afternoon and decided to simulate some pocket carry, so I took a handful of coins and loose keys and shook them all together in my hands for a bit. Then I took a couple of coins and tried to gouge the coating.

As you can see, the deliberate gouging caused some damage to the finish, and the coins and keys seem to have chipped some of the finish off, but for the most part it is pretty undamaged.
Now, let's keep two things in mind:
1- This is not meant to be a protective coating, although it doesn't seem to be doing a bad job overall.
2- At roughly $10/can the coating can be applied to a tool hundreds of times for a very minimal cost.
Also remember that this surface was not prepped for any coating- it was mirror polished.

So the fact that it is retaining any coating is pretty impressive. If I proceed to the SOG portion of the test I'll be sure to scuff the metal up somewhat prior to coating. And, as the SOG lives in a sheath it won't come in contact with coins as much.
Def
-

Watching with interest.
-
Does the coating leave any residue on your fingers after using the tool?
I've used powered graphite to lubricate locks and it creates a mess.
-
Once it is dry it doesn't seem to leave any stuff on your fingers. The graphite in this is suspended in some liquid (maybe some kind of alcohol?) that allows it to be propelled by the aerosol. Once it dries it's pretty solid.
Def
-
I don't recall seeing that at my HD , I am going there shortly and I will check. Looks like good stuff
-
It has lubricated a few locks very nicely- and the fact that it adheres to stuff means that I don't have to reapply it every few weeks/months like I did with the dry graphite.
The drawback is that it is highly pressurized and you end up with some serious blowback. Don't use it when you have a nice white shirt on.
Def
-
It is available here in the states. I have a can here at my house. I got it where I used to work so just check around. I will have to try this. Never thought it would actually stay on something. FYI graphite is used in extreme pressure lubricates
-
Not the same but I'm going to try it , I needed it anyway for a bunch of locks I need to take care of

-
I used it on car aerials
It lubricates, does not collect dust and it is a conductor. -
So I just got a BO ST300 back from Leatherman warranty. They replaced both handles and tools but fixed the loose pivot on the CC plier head. The BO coating was kind of smurfed up on the pliers and stood out against the new handles. Well I remembered that I had picked up a can of this Graphite spray lube after reding this thread. I thought this would be a good test to see how it would work. Well I can tell you that it turned out really well. Looks great and time will tell how it will hold up.
Before
<a href="http://s86.photobucket.com/user/asc67/media/DSC07340_zpszpmhjoo9.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i86.photobucket.com/albums/k115/asc67/DSC07340_zpszpmhjoo9.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
After
<a href="http://s86.photobucket.com/user/asc67/media/DSC07345_zpsvqxfseso.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i86.photobucket.com/albums/k115/asc67/DSC07345_zpsvqxfseso.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s86.photobucket.com/user/asc67/media/DSC07348_zpsxx2l1qfc.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i86.photobucket.com/albums/k115/asc67/DSC07348_zpsxx2l1qfc.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Looks good. Although, you ruined your chance to make the handles match the plier head. LOL!
That's us mobile
-
I'm sure they will catch up eventually ;)
-
Not a big fan of graphite personally, don't ever use it in your SAK pivots or most any aluminium for that matter it corrodes it. Have fun with it I guess. Better than running the tool dry.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login