LM ReCharge with a twist
-
great comparison pics!
and I really like the way your oxidized scales turned out... 
Thanks man, your mods definitely add to my inspiration. Thinking about next one already.

I happened to have a spare Wave...hmmm 8)
thanks for the kind words.
but I can't be held responsible for you catching the modding fever! ;)you know it's bad when you look for good deals on tools that you already have just so you can use them in mods.

-
Wow, impressive. Could go for that one too.
My TTi has been used and abused, and the awl I had on doesn't look half as good as yours does. Don't know why Leatherman hasn't woken up and smelled the coffee yet. Charge owners want the awl too.
Was so not impressed with Dave Canterbury's version, as he put the awl in the middle instead of the outside. He obviously did not do his homework or looked here in the forums. And here leatherman says they don't mod for anyone, ha!
-
They should choose the Surge arrangement for the next generation of Wave/Charge. Outside beefy scissors, blade holder for T shank saws and an awl will complete that excellent series of tools. I don't mind the replaceable wire cutters but they count too for a lot of people. A new Charge TTi like this would be probably the best multitool in the world.
-
@kkokkolis said:
They should choose the Surge arrangement for the next generation of Wave/Charge.Yeah, while very logical something tells me they won't do that any time soon. ::)
LM however did something similar with the ST300 and the Rebar.

-
Nice one, with superb finish!
What is the method for oxidizing? By heating or something like that?
-
that's bad a$$
-
@Psycopyro said:
Nice one, with superb finish!What is the method for oxidizing? By heating or something like that?
OXYAction, Napisan etc laundry whitening/brightening products you can get for few $$ in supermarkets.
Simple and cheap, but very effective.
-
Nice one, with superb finish!
What is the method for oxidizing? By heating or something like that?
OXYAction, Napisan etc laundry whitening/brightening products you can get for few $$ in supermarkets.
Simple and cheap, but very effective.
uh that's beautiful, do you have a link to a tutorial at hand?
thanks!
-
@babola said:
Finally got around to finish my 'Oxy-ReCharge' project today. :ahhhSince for me the MTs need to not only work well but must also look good (Zoidberg, get that smirk off your face! ;)) I sometimes put a little too much emphasis on the appearance, but can't help it, sorry 8)
So I decided to oxidize the Ti scales to force that well known darker shade of Titanium that normally takes years to develop by a normal oxidation process, plus few extra details you don't see everyday done on an MT.
Mods:
-
Swapped stock Charge pliers with the Rebar pliers with replaceable wire cutters.
-
Awl also from Rebar - this one wasn't a simple drop in as it required a little bit of 'meat' taken off the top arch closer to the tip so that the pliers would close properly inside the handle.
-
Oxidized Ti scales; although not that visible from the photos, these are now 2-3 shades of gray darker than the original Ti scales. I'll see if I can borrow a standard Charge TTi from a colleague of mine sometime next week for comparison photo.
-
Blued pivot screws; I originally wanted to acid etch these but like the blued finish better this time as it's near perfect fit with the Ti scales, almost identical. You wouldn't tell the scales and screws are made from a two very different materials.
-
Flattened the dome on screws. While I like button top screws very much, I found a flattened top being in sync with the flat edges of the Ti scales. You may like this or not, but I believe LM should have included slightly flatter screws on a factory standard Charge.
Anyway, that's about it and I'm really stoked how it all came out in the end.




wow! amazing! ... very good works ...
can you please tell me how you darken the titanium? -
-
G'Day,
That looks REALLY good. I'm a big fan of the Ti Charge, and darkening the scales looks fantastic. Would you mind sharing how you did it?
I have heated a set of scales for the rainbow effect, but I think this looks very nice, almost gunmetal gray. Never thought about the screws, I might give them a bit of heat... :D
Well done,
Pete
Thanks mate...not hard, oxidized them for about 15mins. Will drop you a PM. Cheers.
PM me too, please

-
Finally got around to finish my 'Oxy-ReCharge' project today. :ahhh
Since for me the MTs need to not only work well but must also look good (Zoidberg, get that smirk off your face! ;)) I sometimes put a little too much emphasis on the appearance, but can't help it, sorry 8)
So I decided to oxidize the Ti scales to force that well known darker shade of Titanium that normally takes years to develop by a normal oxidation process, plus few extra details you don't see everyday done on an MT.
Mods:
-
Swapped stock Charge pliers with the Rebar pliers with replaceable wire cutters.
-
Awl also from Rebar - this one wasn't a simple drop in as it required a little bit of 'meat' taken off the top arch closer to the tip so that the pliers would close properly inside the handle.
-
Oxidized Ti scales; although not that visible from the photos, these are now 2-3 shades of gray darker than the original Ti scales. I'll see if I can borrow a standard Charge TTi from a colleague of mine sometime next week for comparison photo.
-
Blued pivot screws; I originally wanted to acid etch these but like the blued finish better this time as it's near perfect fit with the Ti scales, almost identical. You wouldn't tell the scales and screws are made from a two very different materials.
-
Flattened the dome on screws. While I like button top screws very much, I found a flattened top being in sync with the flat edges of the Ti scales. You may like this or not, but I believe LM should have included slightly flatter screws on a factory standard Charge.
Anyway, that's about it and I'm really stoked how it all came out in the end.




wow! amazing! ... very good works ...
can you please tell me how you darken the titanium? -
-
To darken Titanium, it has to oxidize. I use simple and cheap method with Napisan, OxyClean or any other oxidizing stain remover you can find in your local supermarket.
Warm up the water in a small container, add powder (approx 1 Tbsp per cup of hot water), agitate slowly and wait. Remove the Ti bits from liquid and wash under the tap. Repeat as required to reach desired darkness.
Nothing to it, really.
-
That method (acid etching using ferric chloride) works on steel, copper etc but doesn't on Ti, unfortunately.
Ti darkens thru oxidation. :) -
That method (acid etching using ferric chloride) works on steel, copper etc but doesn't on Ti, unfortunately.
Ti darkens thru oxidation. :)Yeah I completely misread and misinterpreted this.
Happens. :kirky:@babola said:
Secondly, after I posted my Oxy-ReCharge mod over at EDCF couple of members over there asked me if I could post my next mod in steps, kind of tutorial style. -
Babola is quite the Inspiration, his acid wave thread convinced me to create my Blue Collar Surge. And now my Charge TTi is in peices waiting for oxidation and new parts.......
Instead of liquid or electrical oxidation I may really slow it down with some direct heat.
-
Very nice!!
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



