And so it begins.... (My adventures into Alox!)
-
Ooooh, blue titanium!

-
Any chance of doing the mag glass in stainless??
-
The Ti/ Brass Yeoman looks fantastic!
-
@tattoosteve99 said:
Any chance of doing the mag glass in stainless??Ive got no interest in that, but I will do another Ti version with a grafted on pivot area of a different metal so that it can open and close smoothly.
-
Here's the first brass mag holder deployment on a 93mm frame. :D





-
Classy looking

-
@tattoosteve99 said:
Any chance of doing the mag glass in stainless??Some of the cheap knock-offs do this already, you should be able to get one cheap and see if you could transplant it.
-
Any chance of doing the mag glass in stainless??
Some of the cheap knock-offs do this already, you should be able to get one cheap and see if you could transplant it.
Tried that. Doesn't work.
-
Any chance of doing the mag glass in stainless??
Some of the cheap knock-offs do this already, you should be able to get one cheap and see if you could transplant it.
Tried that. Doesn't work.
Ah, ok, that's too bad.
-
The best option for a silver mag glass woudl be to make one of nickel silver. If you use non heat treated steel its going to not be smooth at all, and heat treating is a pain. Brass and or nickel silver slide like butter though on SAK backsprings.

-
Ok. Make some nickel silver

-
@tattoosteve99 said:
Ok. Make some nickel silver :pok:Sure send me up a piece! Its bloody expensive. :D
http://www.onlinemetals.com/merchant.cfm?pid=12535&step=4&showunits=inches&id=904&top_cat=79
-
Ok. Make some nickel silver :pok:
Sure send me up a piece! Its bloody expensive. :D
http://www.onlinemetals.com/merchant.cfm?pid=12535&step=4&showunits=inches&id=904&top_cat=79
You never know ;)
-
A fellow Canadian posted a video of his favorite instagram members... This guy's stuff looks familiar... :D
Once I the Tormach in I'm hitting youtube with a bunch of video content. I keep meaning to do it but its something Ive been feeling guilty about not making use of.
At 18:45 :D
-
Awesome!

-
@Syph007 said:
A fellow Canadian posted a video of his favorite instagram members... This guy's stuff looks familiar... :DOnce I the Tormach in I'm hitting youtube with a bunch of video content. I keep meaning to do it but its something Ive been feeling guilty about not making use of.
At 18:45 :D
Nothing like free advertising

-
The bladeless ones are for sure growing in popularity. :D





-
I've read up to page 30 and I'm curious as to what the liners are made of. Specifically the colored ones.
Just ordered some pivots and flat heads. First project is going to be a solo.I work in aerospace and have quite a bit of titanium at my disposal. Once you shape your scales do you heat treat them?
-
Just a straight up conversion of an electrician today.




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login