And so it begins.... (My adventures into Alox!)
-
Any chance of doing the mag glass in stainless??
Some of the cheap knock-offs do this already, you should be able to get one cheap and see if you could transplant it.
Tried that. Doesn't work.
-
Any chance of doing the mag glass in stainless??
Some of the cheap knock-offs do this already, you should be able to get one cheap and see if you could transplant it.
Tried that. Doesn't work.
Ah, ok, that's too bad.
-
The best option for a silver mag glass woudl be to make one of nickel silver. If you use non heat treated steel its going to not be smooth at all, and heat treating is a pain. Brass and or nickel silver slide like butter though on SAK backsprings.

-
Ok. Make some nickel silver

-
@tattoosteve99 said:
Ok. Make some nickel silver :pok:Sure send me up a piece! Its bloody expensive. :D
http://www.onlinemetals.com/merchant.cfm?pid=12535&step=4&showunits=inches&id=904&top_cat=79
-
Ok. Make some nickel silver :pok:
Sure send me up a piece! Its bloody expensive. :D
http://www.onlinemetals.com/merchant.cfm?pid=12535&step=4&showunits=inches&id=904&top_cat=79
You never know ;)
-
A fellow Canadian posted a video of his favorite instagram members... This guy's stuff looks familiar... :D
Once I the Tormach in I'm hitting youtube with a bunch of video content. I keep meaning to do it but its something Ive been feeling guilty about not making use of.
At 18:45 :D
-
Awesome!

-
@Syph007 said:
A fellow Canadian posted a video of his favorite instagram members... This guy's stuff looks familiar... :DOnce I the Tormach in I'm hitting youtube with a bunch of video content. I keep meaning to do it but its something Ive been feeling guilty about not making use of.
At 18:45 :D
Nothing like free advertising

-
The bladeless ones are for sure growing in popularity. :D





-
I've read up to page 30 and I'm curious as to what the liners are made of. Specifically the colored ones.
Just ordered some pivots and flat heads. First project is going to be a solo.I work in aerospace and have quite a bit of titanium at my disposal. Once you shape your scales do you heat treat them?
-
Just a straight up conversion of an electrician today.




-
@OHIO said:
I've read up to page 30 and I'm curious as to what the liners are made of. Specifically the colored ones.
Just ordered some pivots and flat heads. First project is going to be a solo.I work in aerospace and have quite a bit of titanium at my disposal. Once you shape your scales do you heat treat them?
I was anodizing aluminum liners to get some colors but those dont last super long and will chip eventually. I mostly just stick to bare metals now, brass and nickel silver.
Ti liners you can anodize a few colors but again the problem of durability as the oxide coating is pretty thin.
No need to add any heat to Ti alloys for my purposes. You actually want to avoid heat as it significantly hardens the material and makes drilling and tapping a chore. This is why waterjet beats laser to cut out Ti parts, no heat issues.
The only times I can think heat would be needed is if you need to bend Ti alot, or to 'reset' the spring position of a Ti liner lock or lock bar, or if you are doing one of the chisel grind box cutter Ti blades, then you'd want it hard as possible.
-
Cool. I've got an argon box to do a local heat treat if need be and I could always drill and type prior to heat treat.
I'll post some pics once I get done with my first.Those pocket clips you've posted, the two hole ones. Are you making those or outside vendor?
-
@OHIO said:
Cool. I've got an argon box to do a local heat treat if need be and I could always drill and type prior to heat treat.
I'll post some pics once I get done with my first.Those pocket clips you've posted, the two hole ones. Are you making those or outside vendor?
http://www.knifekits.com/vcom/index.php?cPath=60_101_379
:tu:
-
I completed a Ti/brass conversion of a CT Lite today and forgot to post the in progress pics of liner making.
The CT layer and light module layer each needed 2 special liners of unique shape and also thicker than standard ones at 0.040" so I had to hand cut those. Its good to be reminded now and then why waterjet rules for liner cutting.

The cheat trick I do though is to only cut and polish the inside of the liners and leave a few mm large on all the back sides of the liners. Then I make a Ti/brass sandwich and grind/polish them all together and then not only does it ensure the liners are all even with the scales, I dont have to hand cut those parts. :D

-
And here is the monster in all it's glory. I lucked out and the pivots needed were exactly 1.000 inches, so I spliced 2 half inches ones together for each and didnt have to alter the length at all.








-
A Beautiful Beast

-
Yes, that is a beautiful beast.
Me thinks you're going to have alot of calls for the brass mag holder and brass liners all polished up and shiny.
The weight must start to be a consideration when you get that thick. Ti scales instead of cellidor, brass liners instead of aluminum - plus all the tools. At some point the thickness and weight must work against comfortable EDC.
But - if that were my knife - I wouldn't notice the weight in my pocket much. Because I'd have it out showing it off all the time!

-
@tankerG said:
Yes, that is a beautiful beast.Me thinks you're going to have alot of calls for the brass mag holder and brass liners all polished up and shiny.
The weight must start to be a consideration when you get that thick. Ti scales instead of cellidor, brass liners instead of aluminum - plus all the tools. At some point the thickness and weight must work against comfortable EDC.
But - if that were my knife - I wouldn't notice the weight in my pocket much. Because I'd have it out showing it off all the time!

Oh yes it is a weighty one for sure. I hope the owner was going to carry in a belt pouch. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login