Victorinox Executive?
-
@Poncho65 said:
It also makes a very usable phillips head screwdriver on larger screw headsAnd it has reach, which is woefully missing from the phillips even on many larger MTs like the Wave, Charge and Surge.
That is a very good point
I had not thought of that but I do remember occasions where that has came in handy 
-
So many phillips screws, it seems, both large and small, are countersunk so deep that a stubby driver will not reach them. Also screws like on door plates which are obstructed by a doorknob and require a reachy driver to get to them.
-
You all are making me want to take my Executive off of the keychain and include it in my EDC lineup. It was my first SAK. Great scissors for whisker trimming, and a great nailfile. I like the uniqueness of the orange peeler, and it's extra functionality with the little serrated blade and screwdriver. It does seem a little knife heavy for such a small SAK though. I don't really know what else could be included in place of the small blade, especially at that size.
-
... It does seem a little knife heavy for such a small SAK though. I don't really know what else could be included in place of the small blade, especially at that size.
There are probably a few Minichamp tools that could be grafted into an Exec in place of the small blade.
Oh that's a good point-I wonder what would work there?
Sent from my XT901 using Tapatalk
-
I have two, but need another one.
One, someone here gave to me in need of help. I paid the $5 and sent it to Victorinox, they sent it to some guy to fix up. It came back looking good, but some idiot sharpened the scissors as if they were knife blades, so the scissors are ruined.
The other one has mammoth scales, but no T&T, and the one scale is cracked and kind of snags on things. I'm afraid it'll totally get cracked up if I use it.
They're $30 though, which is kind of expensive for what they are.
I think it's a good upgrade to a Classic if you don't have much use for the combo tool on the Rambler/Manager series. Two blades, bigger scissors, etc. A fun knife if you like to eat oranges. ;)
-
I grabbed a new black (cellidor) Executive from Amazon - I had to because I didn't have one and you know, gotta have one!
It is a really nice SAK, good if you want bigger than the 58mm but not the full 91mm size.Of course you could try not having a Victorinox Executive, but that's how you get scurvy!
-
He he.. I 'discovered' the 74 mm series just recently. I like the Executive and already got a couple of old NIB ones in black. But mostly I like the Director - same knife but in stainless steel handles - and I have one with me right now. I should post photos at some time. Great little SAKs. The smaller variants as well... Prince, Windsor etc.
-
Soooooooooo here we are 7 years later :o Guess who still has an executive almost daily with them as an EDC? ................... Give up? ::)
This guy
I guess I have found the knife that best works for me in size and utility
It is still paired at work with my Rebar and usually I pair it with whatever other MT I am carrying as well
I occasionally grab another SAK for weekends or a quick trip to town after work weeknights but I find that more often than not I have my Exec with me 
-
My Executive is my favorite knife/tool. Been carrying it for more years than I can remember. I may forget to carry my folder, but my Executive is with me whenever I have pants on.
Sent from my XT1254 using Tapatalk
-
@Fortytwo said:
Has anyone found a solution to the lack of cap lifter? I'm planning on gifting one to my girlfriend but it really needs a cap lifter. I saw Enki_ck had formed one in the file (here). Any other solutions?Not sure a cap lifter mod to the Executive has been done YET :pop:
What about a OPT for cap lifter duty
. I am also a fan of the Executive and when carrying it I too miss an opening layer. -
Has anyone found a solution to the lack of cap lifter? I'm planning on gifting one to my girlfriend but it really needs a cap lifter. I saw Enki_ck had formed one in the file (here). Any other solutions?
Not sure a cap lifter mod to the Executive has been done YET :pop:
What about a OPT for cap lifter duty
. I am also a fan of the Executive and when carrying it I too miss an opening layer.I've seen some folks here carrying a Vic cap lifter stripped from a SAK as an OPT.
-
First page of this thread shows 1 that Spork has modded
and Neil who is apparently MIA now was working on 1 few years ago to be modded as well but don't know if anything ever come of it
I wished Vic would do more with this line cause it is a very capable carrying size compared to the 58 line and now that Wenger is with them they could carry some of the 65 mm line design stuff over to it you would think 
-
Well... the Executive is a good tool. No doubt. But I don´t carry it so frequently. It has a nice setup, but it lacks several good tools. No real choice of drivers and no caplifter. But it has a secondary blade - so it qualifies as an EDC tool.
It should get more pocket time and more attention. The whole 74 mm series, I mean
-
@Humppa said:
Well... the Executive is a good tool. No doubt. But I don´t carry it so frequently. It has a nice setup, but it lacks several good tools. No real choice of drivers and no caplifter. But it has a secondary blade - so it qualifies as an EDC tool.It should get more pocket time and more attention. The whole 74 mm series, I mean
When I got my Executive I was immediately smitten. I love the size and the tool set on it. Missing an opening layer is just an excuse to carry my Cadet tho. Ok I really never need an excuse to carry 2 SAKs.
-
Well... the Executive is a good tool. No doubt. But I don´t carry it so frequently. It has a nice setup, but it lacks several good tools. No real choice of drivers and no caplifter. But it has a secondary blade - so it qualifies as an EDC tool.
It should get more pocket time and more attention. The whole 74 mm series, I mean
When I got my Executive I was immediately smitten. I love the size and the tool set on it. Missing an opening layer is just an excuse to carry my Cadet tho. Ok I really never need an excuse to carry 2 SAKs.
I am sure most peeps here have been guilty of carry 2 or more SAKs at one time or another
:D I carry a MT all the time anyways so this always compliments it. I guess I never need a cap lifter anyways
but if I do I always have a Gerber Shard in my pocket as well ::) :D -
I mostly use the can opener myself as I don't drink beverages with caps. I love the Vic can opener and use it as my only can opener actually.
-
@Aloha007 said:
I mostly use the can opener myself as I don't drink beverages with caps. I love the Vic can opener and use it as my only can opener actually.I guess the fact that I always have a LM with me I never feel that this needs an opener on it I guess
But I if all I carried was a SAK then I would have the same concern 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
