Victorinox Executive?
-
My Executive is my favorite knife/tool. Been carrying it for more years than I can remember. I may forget to carry my folder, but my Executive is with me whenever I have pants on.
Sent from my XT1254 using Tapatalk
-
@Fortytwo said:
Has anyone found a solution to the lack of cap lifter? I'm planning on gifting one to my girlfriend but it really needs a cap lifter. I saw Enki_ck had formed one in the file (here). Any other solutions?Not sure a cap lifter mod to the Executive has been done YET :pop:
What about a OPT for cap lifter duty
. I am also a fan of the Executive and when carrying it I too miss an opening layer. -
Has anyone found a solution to the lack of cap lifter? I'm planning on gifting one to my girlfriend but it really needs a cap lifter. I saw Enki_ck had formed one in the file (here). Any other solutions?
Not sure a cap lifter mod to the Executive has been done YET :pop:
What about a OPT for cap lifter duty
. I am also a fan of the Executive and when carrying it I too miss an opening layer.I've seen some folks here carrying a Vic cap lifter stripped from a SAK as an OPT.
-
First page of this thread shows 1 that Spork has modded
and Neil who is apparently MIA now was working on 1 few years ago to be modded as well but don't know if anything ever come of it
I wished Vic would do more with this line cause it is a very capable carrying size compared to the 58 line and now that Wenger is with them they could carry some of the 65 mm line design stuff over to it you would think 
-
Well... the Executive is a good tool. No doubt. But I don´t carry it so frequently. It has a nice setup, but it lacks several good tools. No real choice of drivers and no caplifter. But it has a secondary blade - so it qualifies as an EDC tool.
It should get more pocket time and more attention. The whole 74 mm series, I mean
-
@Humppa said:
Well... the Executive is a good tool. No doubt. But I don´t carry it so frequently. It has a nice setup, but it lacks several good tools. No real choice of drivers and no caplifter. But it has a secondary blade - so it qualifies as an EDC tool.It should get more pocket time and more attention. The whole 74 mm series, I mean
When I got my Executive I was immediately smitten. I love the size and the tool set on it. Missing an opening layer is just an excuse to carry my Cadet tho. Ok I really never need an excuse to carry 2 SAKs.
-
Well... the Executive is a good tool. No doubt. But I don´t carry it so frequently. It has a nice setup, but it lacks several good tools. No real choice of drivers and no caplifter. But it has a secondary blade - so it qualifies as an EDC tool.
It should get more pocket time and more attention. The whole 74 mm series, I mean
When I got my Executive I was immediately smitten. I love the size and the tool set on it. Missing an opening layer is just an excuse to carry my Cadet tho. Ok I really never need an excuse to carry 2 SAKs.
I am sure most peeps here have been guilty of carry 2 or more SAKs at one time or another
:D I carry a MT all the time anyways so this always compliments it. I guess I never need a cap lifter anyways
but if I do I always have a Gerber Shard in my pocket as well ::) :D -
I mostly use the can opener myself as I don't drink beverages with caps. I love the Vic can opener and use it as my only can opener actually.
-
@Aloha007 said:
I mostly use the can opener myself as I don't drink beverages with caps. I love the Vic can opener and use it as my only can opener actually.I guess the fact that I always have a LM with me I never feel that this needs an opener on it I guess
But I if all I carried was a SAK then I would have the same concern 
-
The Vic opener is better ;) for the job than a LM but in a pinch it still works for me when I need it

-
Has anyone found a solution to the lack of cap lifter? I'm planning on gifting one to my girlfriend but it really needs a cap lifter. I saw Enki_ck had formed one in the file (here). Any other solutions?
That's a DOVO, not a Vic. The cap lifter is original.
Oh, got tricked then, saw it while reading up on the executive (or obviously not reading so much
).As for other tools, I think I'll have to start her off slowly. It wouldn't be tactical trying to get her from zero to two tools in one go... I was thinking of replacing the small blade one way or another since I think that for someone not used to carrying a knife it seems kind of redundant with two blades. But then I saw it and it is just such a neat little blade.
-
The Executive is my absolute favorite knife to take on vacations
The blade length is great and the scissors are fabulous.
The orange peeler is an odd tool ??? - mine is scary sharp, making me a bit leery to use the tip as a screwdriver. I often use it to open packages and envelopes. -
I'd like to see a Manager in 74mm ( is there one comparable? ) tho yes it would take away from the great thinness.
-
@DaveBr said:
The Executive is my absolute favorite knife to take on vacations
The blade length is great and the scissors are fabulous.
The orange peeler is an odd tool ??? - mine is scary sharp, making me a bit leery to use the tip as a screwdriver. I often use it to open packages and envelopes.I admit I that don't use the screwdriver on the orange peeler much myself either
But I do use the peeler itself quite often and most of the use is actually on oranges or tangerines :o :D I have on occasion used it for package opening as well 
-
-
@Fortytwo said:
Has anyone found a solution to the lack of cap lifter? I'm planning on gifting one to my girlfriend but it really needs a cap lifter. I saw Enki_ck had formed one in the file (here). Any other solutions?For a caplifter I cut a notch at the base of the orange peeler as described in The Swiss Army Knife Owner's Manual but I find it is easier to open bottles with the tip of the scissors: set the tip of the fixed blade into a crimp of the cap and pry outward, repeat a couple times on around the cap. Not fast I can wait a moment for a cold brew. But yeah I wish it had a dedicated caplifter like Vic's Manager.
The Exec's blade is much stronger than the 58mms and having a second blade means I can do what I want with the main blade and always have a real sharp one in reserve. But when the wife hit an extension cord with the lawn mower I brainlessly cut into the cord to make a repair without unplugging it and zapped a notch into the edge of the blade. Cut a few more matching notches with the dremel to make it look like it was always serrated. Still a reliable EDC. -
@J Mackrel Jones said:
Has anyone found a solution to the lack of cap lifter? I'm planning on gifting one to my girlfriend but it really needs a cap lifter. I saw Enki_ck had formed one in the file (here). Any other solutions?
For a caplifter I cut a notch at the base of the orange peeler as described in The Swiss Army Knife Owner's Manual but I find it is easier to open bottles with the tip of the scissors: set the tip of the fixed blade into a crimp of the cap and pry outward, repeat a couple times on around the cap. Not fast I can wait a moment for a cold brew. But yeah I wish it had a dedicated caplifter like Vic's Manager.
The Exec's blade is much stronger than the 58mms and having a second blade means I can do what I want with the main blade and always have a real sharp one in reserve. But when the wife hit an extension cord with the lawn mower I brainlessly cut into the cord to make a repair without unplugging it and zapped a notch into the edge of the blade. Cut a few more matching notches with the dremel to make it look like it was always serrated. Still a reliable EDC.Quite shocking :o
Sorry I had to say it ;) I have never thought about putting a serrated edge on 1 of the blades
It might make it more useful for cutting rope and things
I think I may try it on 1 of mine sometime -
@J Mackrel Jones said:
Has anyone found a solution to the lack of cap lifter? I'm planning on gifting one to my girlfriend but it really needs a cap lifter. I saw Enki_ck had formed one in the file (here). Any other solutions?
**
For a caplifter I cut a notch at the base of the orange peeler as described in The Swiss Army Knife Owner's Manual** but I find it is easier to open bottles with the tip of the scissors: set the tip of the fixed blade into a crimp of the cap and pry outward, repeat a couple times on around the cap. Not fast I can wait a moment for a cold brew. But yeah I wish it had a dedicated caplifter like Vic's Manager.
(...)Any pics of that? I'm curious...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
