And so it begins.... (My adventures into Alox!)
-
@OHIO said:
Cool. I've got an argon box to do a local heat treat if need be and I could always drill and type prior to heat treat.
I'll post some pics once I get done with my first.Those pocket clips you've posted, the two hole ones. Are you making those or outside vendor?
http://www.knifekits.com/vcom/index.php?cPath=60_101_379

-
I completed a Ti/brass conversion of a CT Lite today and forgot to post the in progress pics of liner making.
The CT layer and light module layer each needed 2 special liners of unique shape and also thicker than standard ones at 0.040" so I had to hand cut those. Its good to be reminded now and then why waterjet rules for liner cutting.

The cheat trick I do though is to only cut and polish the inside of the liners and leave a few mm large on all the back sides of the liners. Then I make a Ti/brass sandwich and grind/polish them all together and then not only does it ensure the liners are all even with the scales, I dont have to hand cut those parts. :D

-
And here is the monster in all it's glory. I lucked out and the pivots needed were exactly 1.000 inches, so I spliced 2 half inches ones together for each and didnt have to alter the length at all.








-
A Beautiful Beast

-
Yes, that is a beautiful beast.
Me thinks you're going to have alot of calls for the brass mag holder and brass liners all polished up and shiny.
The weight must start to be a consideration when you get that thick. Ti scales instead of cellidor, brass liners instead of aluminum - plus all the tools. At some point the thickness and weight must work against comfortable EDC.
But - if that were my knife - I wouldn't notice the weight in my pocket much. Because I'd have it out showing it off all the time!

-
@tankerG said:
Yes, that is a beautiful beast.Me thinks you're going to have alot of calls for the brass mag holder and brass liners all polished up and shiny.
The weight must start to be a consideration when you get that thick. Ti scales instead of cellidor, brass liners instead of aluminum - plus all the tools. At some point the thickness and weight must work against comfortable EDC.
But - if that were my knife - I wouldn't notice the weight in my pocket much. Because I'd have it out showing it off all the time!

Oh yes it is a weighty one for sure. I hope the owner was going to carry in a belt pouch. :D
-
Yes, that is a beautiful beast.
Me thinks you're going to have alot of calls for the brass mag holder and brass liners all polished up and shiny.
The weight must start to be a consideration when you get that thick. Ti scales instead of cellidor, brass liners instead of aluminum - plus all the tools. At some point the thickness and weight must work against comfortable EDC.
But - if that were my knife - I wouldn't notice the weight in my pocket much. Because I'd have it out showing it off all the time!

Oh yes it is a weighty one for sure. I hope the owner was going to carry in a belt pouch. :D
Omg, that's got to have some good weight to it! The belt pouch is one thing but he better have a good solid belt too!
JR -
Yes, that is a beautiful beast.
Me thinks you're going to have alot of calls for the brass mag holder and brass liners all polished up and shiny.
The weight must start to be a consideration when you get that thick. Ti scales instead of cellidor, brass liners instead of aluminum - plus all the tools. At some point the thickness and weight must work against comfortable EDC.
But - if that were my knife - I wouldn't notice the weight in my pocket much. Because I'd have it out showing it off all the time!

Oh yes it is a weighty one for sure. I hope the owner was going to carry in a belt pouch. :D
Omg, that's got to have some good weight to it! The belt pouch is one thing but he better have a good solid belt too!
JRMaybe I could add backpack straps as back layer tools?
I do love brass liners even though they add to the weight. Maybe in the future I can skeletonize them to reduce the weight.
-
-
Yes, that is a beautiful beast.
Me thinks you're going to have alot of calls for the brass mag holder and brass liners all polished up and shiny.
The weight must start to be a consideration when you get that thick. Ti scales instead of cellidor, brass liners instead of aluminum - plus all the tools. At some point the thickness and weight must work against comfortable EDC.
But - if that were my knife - I wouldn't notice the weight in my pocket much. Because I'd have it out showing it off all the time!

Oh yes it is a weighty one for sure. I hope the owner was going to carry in a belt pouch. :D
Omg, that's got to have some good weight to it! The belt pouch is one thing but he better have a good solid belt too!
JRMy TiRogueneer is noticeably heavier than my MechaRogue, even though they are roughly the same size. The Ti SAKs are beauties though

Sent from my SM-G920R4 using Tapatalk
-
Syph, Was wondering when you are going to offer a solid brass cyber bit-holder and mini flashlight component ;)
Seriously though: great work. I love this thread. -
@neillcurrie said:
Syph, Was wondering when you are going to offer a solid brass cyber bit-holder and mini flashlight component ;)
Seriously though: great work. I love this thread.Ive only come accross 2 people who used the flashlight module in my years of modding, so I probably wont tackle that one. :D The bit holder for sure. I dont know if it should be brass or nickel silver, or maybe Ti would be best. Ti could work actually since its not a backspring tool, it just free rotates. Hmm Ti that thick would be pricey... but then it could be anodized too... hmmm Well we'll see. Im still patiently waiting for the Tormach to make its way to Canada and then learn how to use it, but for sure I can see making up some custom parts to get a SAK up to its max blingy potential. :D
-
@Syph007 said:
Maybe I could add backpack straps as back layer tools?I do love brass liners even though they add to the weight. Maybe in the future I can skeletonize them to reduce the weight.
Oooooh, skeletize me a titanium and brass SAK!!!

I wonder how much you could remove from such a knife and still have it be durable? With the screws and pivots it should be stiff enough to carve out a fair amount of scale.
But then you'd have the law of diminishing returns kick in. The less metal means more labor (and higher cost). You kinda reach a point where the knife weighs nothing and costs a fortune!

-
Maybe I could add backpack straps as back layer tools?
I do love brass liners even though they add to the weight. Maybe in the future I can skeletonize them to reduce the weight.
Oooooh, skeletize me a titanium and brass SAK!!!

**I wonder how much you could remove from such a knife and still have it be durable? With the screws and pivots it should be stiff enough to carve out a fair amount of scale. **
But then you'd have the law of diminishing returns kick in. The less metal means more labor (and higher cost). You kinda reach a point where the knife weighs nothing and costs a fortune!

Yes for sure on a 3 layer SAK with Ti scales and steel pivots the liners dont bear that much of the load of spring resistance.
It wouldn't be cost effective to have them waterjet like that, but if I start machining them, I can just drill a bunch of holes as the final step in places you wouldn't be able to see. Could be a fun project to see if I can get a Ti/brass super tinker equal in weight or lighter than a stock one. :D
-
Maybe I could add backpack straps as back layer tools?
I do love brass liners even though they add to the weight. Maybe in the future I can skeletonize them to reduce the weight.
Oooooh, skeletize me a titanium and brass SAK!!!

**I wonder how much you could remove from such a knife and still have it be durable? With the screws and pivots it should be stiff enough to carve out a fair amount of scale. **
But then you'd have the law of diminishing returns kick in. The less metal means more labor (and higher cost). You kinda reach a point where the knife weighs nothing and costs a fortune!

Yes for sure on a 3 layer SAK with Ti scales and steel pivots the liners dont bear that much of the load of spring resistance.
It wouldn't be cost effective to have them waterjet like that, but if I start machining them, I can just drill a bunch of holes as the final step in places you wouldn't be able to see. Could be a fun project to see if I can get a Ti/brass super tinker equal in weight or lighter than a stock one. :D
If anyone can do it, you can Syph.
-
This one is just 2 layers shy of a swiss champ. :D





-
What does it weigh in at? Looks hefty.
-
@Toolslinger said:
What does it weigh in at? Looks hefty.I think the weight is around.... to cool to matter. :D
-
@captain spaulding said:
What does it weigh in at? Looks hefty.
I think the weight is around.... to cool to matter. :D
If you have to ask how heavy it is, your pocket isn't big enough. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




