New CRKT tool - the Bivy!
-
The handles are aluminum with a good texture. The tools are actually really high quality to my experience. Have you tried one yet?
-
I had that issue with a few knives and tools over the years, and in many cases you really do get used to it after you put a few miles on a tool. The most prominent one in my mind (for me) was the Benchmade Panther. I really didn't like the square handle but eventually bought it simply because it was discontinued. After some use I found that I really liked it.
Def
-
@Grant Lamontagne said:
I had that issue with a few knives and tools over the years, and in many cases you really do get used to it after you put a few miles on a tool. The most prominent one in my mind (for me) was the Benchmade Panther. I really didn't like the square handle but eventually bought it simply because it was discontinued. After some use I found that I really liked it.Def
That Benchmade doesn't bother me. The handle's a little cheap looking but the blade looks alright.
-
Yah, that Benchmade doesn't bother me either.
-
The blade is gorgeous, but the handle (at first anyway) felt like I was holding a piece of Lego so I avoided it at first.
My point is, it's worth giving things a shot- it's hard to tell how you really feel about something until you've put it to work.
Def
-
Yeah, like the Leatherman Rebar's awl pisses me off when I deploy it then close the pliers.

-
Exactly. :D
Or how Leatherman advertises all of their one handed tools as being quick to deploy...... unless you are a lefty, in which case you don't matter. :P
Def
-
I have a Ka-Bar Dozier that looks like that Benchmade, and the handle is fine.

-
That looks pretty sweet actually. I think I may have to check it out.
Def
-
It's cheap can't remember where I bought it. It has a good blade. I liked the style of it too. You can get it with a thumbstud too, but I like the hole.
-
It can be had on the South American river for around 20-21. The thumbstudded version comes with a less acute tip and more colors.
-
I got mine from AG Russell for just a little more than that several years ago. When I carry a 3" folder it's usually that or a waved Spyderco or a CRKT M16.
-
I would have though the claws would have gotten in the way!
Def
-
As a semi-ambi left hand definitely preferred with knives and multis I concur about the left handed opening thing. I don't own a Wave or any other 1 hand opening Leatherman tools yet, but if I use my pointer finger to start the opening I can finish it with my thumb by reaching over the tool. My grandfather opens his really fast left handed, I can't even see how he does it.
-
I've got the Kabar Dozier with the thumb stud. It's a great little knife, very light weight but solid. There's no blade play at all, and centering is spot on. The clip on mine was a little loose to start, but it was easy to bend and tighten up. All in all, it's a fantastic value, one of my most-carried knives. The only downside for me is that you can't flick it open, the lock spring is just too strong.
The Bivy is interesting. Fit and finish on mine is not great, but not bad; I'd say a little worse than my Sog and Gerber MTs (I'm talking about PowerLock and MP600 here though). It seems unnecessarily thick, and therefore heavy. The design is really clever, using the single switch for everything is great, but unlocking the tools can be a little tough because there's a lot of resistance. As a result, you might tear your thumb up after a while. Opening the pliers one-handed took a little practice for me; I found putting my middle finger in the cutout against the thumbstud essential for getting enough leverage to work the switch. The plier head feels solid but the handle (the one that pops out) is thin and flexes, which causes some concern; it's also not very ergonomic. The teeth in the pliers don't go to the tip: there's a small section on the end that's flat. I tried to peel the foil cover off a can of cashews using the pliers, but they slipped worse than my fingers. There's probably some situation in which you'd want this, but it's not my thing. The marlinspike is great, I actually used it to undo a knot in my shoelaces the other day. It was better in this task than a SAK awl, because there's no sharp edge. Phillips driver is so-so, it can do the job if the screw isn't too tight. Is it a good value? I got mine for $40, and for that price you can get: SOG PowerLock, Gerber MP600, Leatherman Rebar / Skeletool / Wingman / Sidekick / Rev — all of which are better tools, but they don't have OHO pliers and blade. If you need exactly that, maybe this is your tool (or maybe you should save up a bit more and get a Leatherman OHT). Otherwise, I'd get one of those other options.
-
My first Post - pls be kind to me.
I just received my CRKT Bivy today and these are my first impression.- A decent knife on a multitool - imho! I have read other forums where others are less than impressed with a tanto blade BUT I have several CRKT M-16's and am very happy with this blade profile.
- A Marlin Spike - I love the spike as both something to unknot rope but as a general purpose prodder when I don't want to dull the main blade.
- The Downsides: it's a THICK tool. I have a Leatherman OHT and it's EVEN thicker than that. Which means whilst it has a belt clip - it's very noticeable in jeans when carried.
- While the Marlin Spike is a nice feature, you have to access it first to get to the phillips head (kinda an oxymoron for a "one-handed" tool). Yes there is a thumb cut for the flat blade but nothing for the phillips. And on the phillips and flat drivers - these are very flimsy. My Leatherman Skeletool CX and the OHT have far superior drivers.
- The use of aluminum scales but still having s/steel liners! It's funny that the original CRKT M-16 came out with aluminum scales but only one s/s liner. The Bivy has 2 on either side of the scales and 3 internal s/s spaces. Infact, that the scales and liner on the tanto knife could stand alone as a separate knife. This just adds to the bulk of the tool. But having said that - the Bivy is still lighter than the Leatherman OHT.
- The s/steel liners between the spike/phillips/flat drivers are very very thin and I think susceptible to damage if dropped. Also the finish leaves a lot of rough edges on both the screwheads and the liners. But as pointed out before hand - you get what you pay for. The Bivy sells for $70 in Australia.
Final point - the one hand opening (OHO??) of the pliers is the Party Trick. It's going to be a smash hit with the blokes standing around the summer BBQ - beer in one hand and some guy quoting, "That's not a multitool, Mate! THIS is a multitool" and quickly flicking out the pliers. And having said that - to round out the collection - Should I buy the SOG version???? I seem a bit wary of the sawtooth frontend of the pliers part. Any comments on these?
-
Welcome to the boards mate.

-
Welcome!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




