Gerber Episodes.
-
@Marcellus said:
What a great , valuable contribution to this forum
Thanks again Chako!I have never posted with my own quote in it, to my recollection, but...
I was raving about this presentation, and it was not even DONE yet!
Outstanding post Chako
He went from the recording studio to a Platinum album, like overnight!
-
Episode 10 - Gerber Multi-Lite
Introduced in 1998, the Gerber Multi-Lite offered an alternative to a pliers based multi-tool. The concept never really took off, and the end of production occurred in the early 2000s. This is an old and somewhat dated design, although I have seen a few other similar designs, especially from Utica Kutmaster.
There were two main models, although I have read there may be as many as 4 variations of the Multi-Lite. Going from this link, I have the two main models in my collection (corkscrew and removable saw).
Now, I do like the Multi-Lite. There is a lid compartment which contains a small flat driver, a toothpick, and a pair of tweezers. Along with the compartment, there is an anemic yellow/amber/orange LED lamp that runs off of a single CR1620 button cell. The light is not strong by any stretch of the imagination. However with that said, there is enough light to get you into your house in the dark.
The Gerber Multi-Lite came in mostly two colours. The black lid for the saw, and green for the corkscrew.
Here is the corkscrew model, with the saw model showing the bottom side with the locking instructions stamped into the metal. The side cutouts is a design feature of the MP400...showing a little design continuity. The 3 tools that are stowed in the lid are also shown in this photograph.
Here are the two variations I have in my collection. Note that the saw is the same as that seen in the Gerber Multi-Lock Woodsman.
Side profile.
To access the battery, simply pull off the rubber cover.
Yes, i am a fan of the Multi-Lite because of its quirkiness. It does manage to pack a lot of tools into a boxy envelope. No pliers included, but then that was the idea.
-
I've always thought the Multi-Lite was neat as well. I've carried and used mine a number of times. Mine's the corkscrew model.

-
Episode 11 - Gerber Keystyle
Here is an odd little keychain tool. I can't seem to find any information of when it was introduced, but I would wager it would be early to mid 2000s. This tool is now discontinued.
I have the Green Marble Keystyle. It certainly is a pretty tool featuring an iridescent Gerber logo, even though the photos do it no justice.
Odd in that it basically mimics a Victorinox Classic in an overly fat form factor. Where the Victorinox Classic is very sleek and pocket-able, the Gerber Keystyle is anything but. The tools slide in and out via a separate sliding lock mechanism for each tool except for the Fiskars scissors which for some unknown reason, do not have a locking mechanism. The scissors also have the distinction of being the only traditional swing out tool on the Keystyle.
the backside of the Keystyle showing the sliding and locking channels for each tool. To unlock a fully deployed tool, simply press down on the little black button and slide it back into the Keystyle. It works ok and is easier to use than to describe.
How big is this thing you may be asking yourself? Here is a side profile of the Keystyle. I would rather pocket a Victorinox Classic any day...which may explain this products relatively short production life.
The Keystyle features a small Phillips driver, a small flat head driver, a small knife blade, a small pair of scissors, and a removable toothpick.
The Keystyle does not offer anything over a Victorinox Classic. other than a much larger profile. Short tools and a fiddly design relegates this one more to a collectors shelf than as a user. One thing that the Keystyle has going for it, it is pretty enough to EDC this at a black tie party or some other formal affair.
-
-
Episode 12 - Gerber 500 Recoil
This unique tool was introduced in 2003. Not sure who at Gerber thought that spring loaded pliers was a good idea, but there must have been enough consensus to put this somewhat dangerous tool into production. I say dangerous because the spring action is very powerful. So powerful, that I have found that the easiest way to put the pliers back into the handle is to jam the jaws on a solid surface and push hard until you hear the locking mechanism click. I jokingly call this "arming the pliers". I am not far off however with that statement.
To deploy the pliers, slide the circular selector from safe to ready, and press that button. To close up the tool again, push the pliers back into the tool and slide the selector back to safe.
The Recoil only has 4 fold out tools. You have your Fiskars scissors, a sheep foot knife blade, a combo flat driver/can opener/wire stripper, and a combo Phillips driver/bottle opener/wire cutter. The rest of the body contains a very strong spring.
The fold out tools do have a locking mechanism.
The danger zone.
What can I say about the Recoil. I think this is a very playable model. If you like to flick and fiddle with multi-tools, a Recoil is almost a needed model. It is dangerous however. the speed those pliers come out is amazing, and the amount of force required to push the pliers back into the body is a little frightening. if you get one, play safe with it. It is unique, and I do not think Gerber's design was ever copied...probably worried about lawsuits I guess. SOG has the SwitchPlier...and that is a much safer and saner design. Just saying.
-
-
:ahhh :ahhh :ahhh Pliers of death :ahhh :ahhh :ahhh

These posts are great Chako
I am loving the pics and the history I am learning of Gerber 
-
Episode 13 - Gerber Diesel
Introduced in 2005, the Gerber Diesel improved slightly on the venerable MP600 design. As such, I have always though of the Gerber Diesel as an updated MP600. Sporting new pivots, and taking a cue from Buck, the handles are stamped with little icons telling you where the various tools reside...at least for the larger tools.
By this stage, Gerber had improved the handle geometry to prevent palm pinch. The new improved pliers helped in this regard somewhat.
The Gerber Diesel came in stainless, black oxide, and camo finishes. My example of a stainless steel Diesel sports two Phillips drivers. Somehow at the factory, the assembler exchanged the large flat head driver for an extra Phillips.
A closer look at the updated cosmetics.
Here is a Camo Diesel. Note the proper tool assortment as opposed to the dual Phillips in the above example.
The Diesel also improved the ergonomics of the locking mechanism.
Despite these updates seen in the Diesel, the MP600 is still a very strong seller. I personally like the Diesel. I find it rattles a little less than the MP600.
-
Episode 14 - Gerber Freehand
Introduced in 2006, the Gerber Freehand took some design cues from the Diesel which preceded it by a year. Those design cues are mostly external, as the Freehand also sported a new and updated plier system that attempted to eliminate palm pinch and keep the tool as compact as possible when closed. This added a rather complex mechanism. It did the job, but it also was prone to failure, as I do recall some folks having issues with the mechanism itself.
The Gerber Freehand is a very BIG multi-tool. It is one of Gerber's largest and heaviest multi-tools ever produced. Note the movement of the locking levers to the sides of the tool.
All tools are outside accessible, which is a big improvement to the Diesel and older multi-tools. Now you could open them up without having to deploy the pliers first. One downfall to the Freehand are the very small secondary tools. For such a large multi-tool, the inclusion of such small tools looks farcical. Worse yet, the reach of them is almost impractical.
Closer look at some of the design features of the Freehand.
The Freehand is a massive multi-tool let down by very small secondary tools. it does build upon the older Diesel, and in some cases, diverges greatly from the MP600/MP400/Diesel form factor.
-
Episode 15 - Gerber Flik
The Gerber Flik was introduced one year after the larger Freehand, back in 2007. I view the Freehand and the Flik as members of the same family. Seeing that the Freehand was such a large multi-tool, it was logical for Gerber to come out with a smaller tool. That smaller tool is the same size as the average full size multi-tool. That tool is the Flik.
Much like the Freehand, the Flik also has a very complicated pliers pivot system. When closed, the tool is very compact, or at least more so than the MP600/MP400/Diesel.
Here is a photo of a Flik closed.
pressing the buttons and sliding the pliers forward, the handles are still tightly nested against each other.
Towards the end, the pliers will click to a stop and the handles will wedge themselves apart. This mechanism is complex and a little unique. Much like the Freehand, this complicated mechanism have had some recorded issues in the past. I have yet to see any of these issues in my copies, but just know that the possibility of something going wrong is a possibility, however slight that may be.
Of interest, the Flik is a smaller Freehand in many ways, including the small secondary tools. However, they do not appear to be so comically small in the Flik as they appear in the much larger Freehand.
There is also a Flik Fisherman version that came out in 2009. Much like other Fisherman models in Gerber's colourful history, the Flik Fisherman differs with the specialized pliers head, and the inclusion of a nail-file with hook sharpening groove. Like all other Fisherman models, the pliers do stick out of the tool quite a bit.
Speaking of issues, when I took this photograph, only one side of the complicated pliers mechanism had engaged in the locked position...causing the pliers to be slightly skewed off center. When I attempted to open the tool more, it wouldn't engage until I fully pulled the pliers away from the handles. Not a big issue, but it could be depending on the circumstances.
The regular Flik with saw, and the Fisherman version which replaces the saw for a file.
A close up of the locking mechanism.
And one of the Fisherman pliers sticking out of the body.
A bonus shot for those wondering about the difference in size between the Freehand and the Flik.
The Flik attempted to eliminate all complaints of palm pinch, and did a good job at the expense of having a very complicated pliers pivot system. I have only had little issues such as the photo above illustrates. Much like the Freehand, the secondary tools are small and limited because of that. With all of that said, I like the Flik. If you enjoy mechanical things that just feel good in use, the Flik's opening and closing mechanism is a nice thing to behold and feel.
-
-
-
Episode 16 - Gerber Cool Tool
Acquired by Gerber around 1996 from another company, the Cool Tool was one of the first multi-tools designed to repair bicycles. Here is a news snippet from the Cool Tool's original manufacture from the early 90s.
When Gerber started producing the Cool Tool, they also included a sheath with it. Got to love the slogan "Ride it, wreck it, repair it", and the cool mascot found on the sheath.
For more information, please visit our Multi-tool encyclopedia here...
http://wiki.multitool.org/tiki-index.php?page=Cool+Tool
There were also a few other accessories/related items for the Cool Tool such as (Photos found on internet)...
The Quick Release tool combines the functions of the seatpost clamp quick-release with a 4-5-6mm allen wrench, 14/15ga spoke wrenches, and a 10mm box wrench
and
and
Being a little difficult to find these days, the Cool tool is a cool addition to any collection.
-
Episode 17 - Gerber MultiPlier 800 Legend
Introduced in 2000, the Gerber MultiPlier 800 Legend was a departure for Gerber. This is Gerber's first butterfly opening mulit-tool.
Note the side tool lock levers.
The Legend 800 is feature rich, including a removable saw blade, a feature seen on premium Gerber models.
Some design features of the Legend 800.
-
Episode 18 - Gerber MultiPlier Urban Legend 700
The Gerber Urban Legend 700 was released either in 2001 or 2002 by my best guess. It is smaller than the Legend 800, and has some weirdness associated with it that is a bit puzzling. For instance, there is an attached pair of tweezers included in the tool set. You can tell it is the smaller sibling of the Legend 800 as it follows all of the 800's design cues.
You can see the odd attached pair of tweezers.
Looks like a Legend 800 except for more black here and there.
No removable saw blade in the Urban Legend 700.
There was also a special edition Terminator 3 version that features a few cosmetic differences.
The most significant change aside form the colour and handle branding, are the pliers.
Of interest, there was also a T3 MP400 and MP600 produced by Gerber. Seeing as the movie came out in 2003, these T3 Gerbers date to that time.
-
Episode 19 - Gerber Grappler
2010 saw a new model for Gerber, and one that is of some interest. The Grappler has the distinction of being the first and only (to date) locking pliers multi-tool from Gerber.
It is roughly the same size as the Gerber Freehand. This makes the Grappler a BIG tool.
Much of the body is relegated to a single channel that holds the pliers and sliding/locking mechanism. The fold out tools are located on the exterior of this channel. I like to think of these as outboard pods.
There is only one single sliding mechanism as opposed to the standard two seen on the majority of Gerber sliding pliers head designs.
One deployed, the jaws are skewed away from center. You can also see the somewhat difficult to get to adjustment knurl nestled inside the body. I say difficult to get if you have largish fingers.
Taking a design cue from the older Recoil, you get 4 longish folding tools.
Some closer details of the jaw pivot.
Here you can see the design limitations. It would have been better if that knurl could have been larger. There was room actually to do this as the handles are cut out already. Regardless, it is still a functional design that works.
When closed, the whole sliding mechanism mates with a hook on the inside ensuring the tool doesn't open when fully closed.
The Gerber Grappler definitely follows some Gerber design cues from older models. Designed to compete with the much older and more elegant Leatherman Crunch, there just aren't that many locking pliers multi-tools out there. Especially those that fold into a smaller package. For that reason, the Gerber Grappler is a noteworthy multi-tool.
-
Episode 20 - Gerber Steady
Now for something completely unique in the multi-tool world...or at least as far as I know. The Gerber Steady was introduced in 2012, and is aimed at the picture taking market segment.
How you may wonder is it aimed at the photography world you may ask? The Steady comes with a small camera mount screw on a tiny ball head. There are also two tripod legs that pull out nestled one on each side of the Steady (which lends the tool its name). The third leg of the tripod is the Steady's posterior.
Here, you can see the small camera mounting screw.
I am not a big fan of curved handles, but the Steady didn't cause me any issues...possibly due to the very grippy textured surface. The Steady is a butterfly opening tool and not a sliding pliers design.
The tool selection offers both a large and small knife blade, along with that unique camera mounting screw.
Here is a small video camera mounted onto the Stead with both legs deployed. The green sections are made from a very grippy soft textured rubber.
The side arms fold and are kept there by a slot. To deploy the arms, simply rotate the arm outwards and bend them into position at the hinge.
A closer look at the camera screw and mini ball mount. My first though when I saw the Steady, was the eventual wear and tear on the plastic part that holds the ball mount in place would eventually lead to any device mounted on it to flop around. However, I assume upon closer inspection that there is an adjustment screw to tighten the mount located just behind the ball mount. If that is the case, then you can control the tension, which is a nice feature to ensure your camera or cell phone will remain in position.
On the other side, two folding tools and the two tripod arms.
A good view of the textured surface.
A quirky multi-tool. Now if only Gerber had figured a way to incorporate a selfie stick into the design, just imagine how many more units they would have sold.

-
Episode 21 - Gerber Myth Archery Tool
Part of the Myth line of hunting gear by Gerber, the Myth Archery Tool is something a little different in the Gerber product lineup. This tool was first introduced in 2013 with product reaching the market towards the later part of 2013 and early 2014.
What also makes the Myth Archery Tool a little unique is the forbearance of a set of pliers for an adjustable wrench. Adjustable wrench multi-tools are not as common as plier based multi-tools.
Because this is aimed squarely at the archer, you do get a few hex keys with a Phillips and flat driver.
On the back side, are two little paddles that when depressed will aid in extracting those Hex keys.
A closer look at that smooth jawed adjustable wrench.
On the back, is a nifty broad head wrench.
The Gerber Myth Archery Tool is a specific tool for a specific market. It is a little unique in the world of multi-tools as it is based around a smooth surfaced adjustable wrench. There are other archery specific tools out there by other companies, and most of them are pliers based.
-
Episode 22 - Gerber Myth Shotgun Tool
This squarish tool came out the same time as the Myth Archery Tool. It is also part of the same Myth family, which also contains numerous knife blades, and other hunting accessories. The colour scheme for the Myth series is a muddy brown with a black rubber surface on some parts.
A top view of the back showing the large sliding tool lock lever.
A top view of the bottom. Note the black housing on the left that houses a 1 foot spring retractable measuring tape.
The Myth Shotgun tool does offer a nice sized knife blade, along with a saw, a dis assembly punch pin, and a universal shotgun choke wrench. The tool also has a measuring tape.
Looking at the back of the tool, the measuring tape.
Another Myth product for the hunting market segment, the Shotgun Tool offers a lot in a boxy package.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login























































































