What did you use your Leatherman for today?
-
I used the pliers on my Crunch to pull a strap through a buckle on my backpack.
-
Used my Supertool 200 to install a new LED under cabinet light over the sink this morning. Used the saw to cut a channel in the drywall for the wiring and the pliers and Phillips as well.
-
Wave helping me put up some cattle fence panels today.

-
I used my Rebar to help me and my youngest son build a Pinewood Derby car for tomorrow's race. The pliers worked great to align the axles! Went to get an alignment tool but the one we found was too narrow for the body. Leatherman (and the Evo 81 scissors) came thru again!
-
-
I used the blade on my Crunch to open up a taped up box of pasta to cook for dinner last night..
-
Used my Super Tool 300's Phillips driver to reattach some boards that had blown off the outside of the barn, and the awl to clean the dirt-caked screw head to allow the Phillips to fit inside the head.
-
I used the Signal's hammer to pound the padlock on our storage unit shut. It's the only way to do it as it's rusty.
Sent from my SM-G920R4 using Tapatalk
-
I cut the damaged wheel well out of a crashed car with the blade of the PST. A piece of plastic held it to the frame and kept the wheel from turning freely. "I have a Leatherman....I can help!" really paid off this time!
-
I used the serrated blade on my ST300 to cut a piece of starter rope to fix a cut-off saw today and cut the tape on the bottom of a box so I could compact it down and throw it away

-
I used the screwdriver on the Micra to tighten a screw in an old wooden bank we have.
-
I will spend hundreds of dollars for a good knife but I'm too cheap to spend $50.00 for a hose.LOL
I replaced the female end of the hose last week and today I replaced the male end.I used my ever trusty Leatherman Wave to accomplish this minor repair.The serrated blade worked well to cut the old hose in preparation for the installation of the of the male mender device.I then relied upon the flat blade screwdriver to attach the collar that holds the new part in place.
A job well done Leatherman.
-
The Wave came to use frequently today. I was at home with my 2 year old son and after lunch I decided to go to my parents for the afternoon. My wife went to work and would return in the evening. So I went to my ma and pa and drink a coffee, eat a cake and have beer.
But I was wrong. Both almost have some age. They were doing yard work and some gardening. So we (me & my son) were put to work as we arrived. LOL!
It was a great afternoon. The screwdriver came in handy as did the serrated edge and the pliers as well.
The caplifter finally opened a beer.

-
Way to go Humppa!!
My son used the PST II to pull some old dried grass out of our reel mower today. -
After the loss of my LM Surge and the unknown where abouts of my utility knife I need to cut some plastic to line the planter box, so out came the trusted wingman.

-
Nothing really, just accompanied me to lunch today and some good Mexican food!

-
Used the Wave a bit today. Was pulling weeds without any gloves and after enough little stab wounds I decided the Wave would pull the rest. I also used the scissors to cut some signs down and the wood saw to trim some trees.
-
I used the Rebar's saw to prune some low tree branches and cut some brush in the backyard.
-
I used my Crunch to change the Taps (Faucet) on the kitchen sink.
Didn't need any other tools.Also I used it to adjust the chain tension on my little Kawasaki 100 - mainly to see if I could.
Crunch rules

-
I used my Rebar to twist some tie wire for use on some scaffold tags to attach them to scaffold

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

