leatherman sheaths
-
I am fairly certain that will work but can't be completely positive until I get home in a few hours
I will check then and tell you definite unless someone else has already done so 
-
Also welcome to MTO the friendliest place on the web

-
It probably will work but it may stretch it out as to make it really loose for your Rebar. If you are buying the Crunch new it should come with a sheath. Leatherman does list the Sheath for the Crunch as being 4.2"
http://www.leatherman.com/crunch-leather-sheath-4-2-202.html#start=9And welcome to the forum

-
Thanx guys! I'm about to buy the crunch on amazon, and I can't find if it comes with a sheath, whether it is nylon or leather. Do you know any more about that?
Grtz Yannick
PS. Thanx for the warm welcome!

-
The Crunch comes with the 4,2" leather sheath - if it is sold as new.

-
Just now getting around to checking
I checked the Crunch with both a Rebar sheath and a Blast sheath and it fit just fine
Only thing that makes the Crunch bigger than a normal 4 inch LM is the adjustment screw but it fit in both my sheaths with a little play even 
-
If the OP has been answered, I'd like to derail this somewhat to ask if anyone has any good descriptions or pictures of the different Molle sheaths going or that have gone in the past?
What's hot, what's not that sort of thing?
-
I Would also be intetrested in the differencies. I can see on the web that there are different Molle XL sheaths. But descriptions of the differencies are nowhere to be found.
-
If I had any molle sheaths I would try and answer your questions guys but I don't have any either :-\ I even searched last night on here for info about them and didn't come up with much

I have been thinking of starting a thread with all the variations of sheaths that I have and seeing if we could compile all info about the LM sheaths together like that but I didn't have the time to get any pics of any sheaths yet

Hopefully somebody with a molle sheath will be by to help answer your questions though

-
I would love to have a leather sheath for my Surge but I have yet to find a leather sheath with a pocket for the bit kit.
-
@Eld said:
I would love to have a leather sheath for my Surge but I have yet to find a leather sheath with a pocket for the bit kit.I am fairly certain that the leather sheath (factory sheath) I have with my ST300 is the same as my Surge sheath and it has a back elastic pocket for at least one bit card (don't know if two would fit or not
I have the bit kit card that has the bit adapter in mine as it's the one that's needed to use the bits with the ST300 
-
That's the sheath I keep my Wave and bit kit, clip on saw and bit extender in. I bought it way back when and it has held up very nicely

-
It is a very nice sheath that I wished that hadn't retired :-\
-
@Eld said:
I Would also be intetrested in the differencies. I can see on the web that there are different Molle XL sheaths. But descriptions of the differencies are nowhere to be found.You can get some info on the Leatherman Molle sheaths in this topic. I started that topic to point out the difference in quality between the old and new Leatherman Molle sheaths, but somewhere in this topic the Molle XL sheath is mentioned also.
If you want more pics compairing both types of Molle sheaths, I could take some pics tomorrow from one of my "regular" Molle sheaths and one of my Molle XL sheaths, just let me know ;).
-
@Eld said:
I would love to have a leather sheath for my Surge but I have yet to find a leather sheath with a pocket for the bit kit.The Surge and ST300 use the same leather sheath, it's the biggest leather sheath Leatherman has and it has a pocket for the bit kit. I believe its product code is "Premium 4.5" nr. 931017", the small version (for the Wave) has product code "Premium 4" nr. 931016, at least that's what it says on the back of the blister package of one of my Leatherman sheaths.
-
I would love to have a leather sheath for my Surge but I have yet to find a leather sheath with a pocket for the bit kit.
The Surge and ST300 use the same leather sheath, it's the biggest leather sheath Leatherman has and it has a pocket for the bit kit. I believe its product code is "Premium 4.5" nr. 931017", the small version (for the Wave) has product code "Premium 4" nr. 931016, at least that's what it says on the back of the blister package of one of my Leatherman sheaths.
I have the leather sheath for the Surge and it has a pocket for the file/sawblade but if you put half the bit kit in this pocket (10 bits) you cannot close the sheath without tearing it apart. There is no way you can put the complete bit kit with all 20 bits in the pocket.
-
I Would also be intetrested in the differencies. I can see on the web that there are different Molle XL sheaths. But descriptions of the differencies are nowhere to be found.
You can get some info on the Leatherman Molle sheaths in this topic. I started that topic to point out the difference in quality between the old and new Leatherman Molle sheaths, but somewhere in this topic the Molle XL sheath is mentioned also.
If you want more pics compairing both types of Molle sheaths, I could take some pics tomorrow from one of my "regular" Molle sheaths and one of my Molle XL sheaths, just let me know ;).
There was no pictures of the back or attachment area in your thread.
:DI believe they are slightly different as well. If I remember correctly the older molle attachment left a part "floppy" and the newer style fixed that. I could be wrong though.
-
I would love to have a leather sheath for my Surge but I have yet to find a leather sheath with a pocket for the bit kit.
The Surge and ST300 use the same leather sheath, it's the biggest leather sheath Leatherman has and it has a pocket for the bit kit. I believe its product code is "Premium 4.5" nr. 931017", the small version (for the Wave) has product code "Premium 4" nr. 931016, at least that's what it says on the back of the blister package of one of my Leatherman sheaths.
I have the leather sheath for the Surge and it has a pocket for the file/sawblade but if you put half the bit kit in this pocket (10 bits) you cannot close the sheath without tearing it apart. There is no way you can put the complete bit kit with all 20 bits in the pocket.
I carry my Surge in that leather sheath, along with one plastic bit holder, all the time ...
But I never carry two of those bit holders, and I never carry the extra saw/file either, most of the time I use the file on my Surge, and the saw (being shorter than the one on my Swisschamp ... ::)) stays at home.
If you want a leather sheath that can hold your Surge, the saw/file kit, and two bit holder cards, you're going to get a custom sheath I guess. Not even the Leatherman Molle XL sheath can carry all of that (just tried it).
-
I have all of that in ny Molle XL sheath. It works when I put the bit kit in the same space as the Surge. But it is a bit wobbly because of the wheight in combination with the narrow belt strap. It is also somewhat fiddly to get the Surge in an out of the sheath as the bits are in the same pocket.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
