Skeletool RX?
-
I won't be getting one, but I do like the idea of different colors and the blade shape with longer serrations looks like it would lend itself well to being a more heavily used tool.(Frequent use, not more difficult).
I enjoy my skeletool, not my favorite but I think it does make a good minimal carry with a blade on par with a lot of knives I have.
-
As much as I believe they really half-arsed their effort on the Skeletool RX (sigh) I do still sort of want one.
::)
-
Some people have complained about the Skeletool RX's lack of an oxygen tank wrench. Although LM doesn't say it has one, the truth is that the RX can in fact be used to open oxygen tanks.
Assuming the RX has the same pliers and the regular Skeletool, I just used mine (the regular Skeletool) to open an oxygen bottle. The valve fits pretty well into the opening of the pliers.
-
@JJR512 said:
Some people have complained about the Skeletool RX's lack of an oxygen tank wrench. Although LM doesn't say it has one, the truth is that the RX can in fact be used to open oxygen tanks.Assuming the RX has the same pliers and the regular Skeletool, I just used mine (the regular Skeletool) to open an oxygen bottle. The valve fits pretty well into the opening of the pliers.
Good to know. Thank you.

-
@JJR512 said:
Some people have complained about the Skeletool RX's lack of an oxygen tank wrench. Although LM doesn't say it has one, the truth is that the RX can in fact be used to open oxygen tanks.Assuming the RX has the same pliers and the regular Skeletool, I just used mine (the regular Skeletool) to open an oxygen bottle. The valve fits pretty well into the opening of the pliers.
Aren't the pliers harder than the valve material though? If so, wouldn't that scar up the tank?
-
It could. But the valves are not cranked down like nut on a bolt. Or at least not the ones I have came across.
That's us mobile
-
In all honesty, is it really that big of a deal if this tool doesn't have an oxygen bottle wrench?
When I'm at work, I typically have four oxygen bottle wrenches at my disposal. I wear a Leatherman Tread, I carry a Leatherman Raptor and a Gerber Hinderer Rescue, and last but not least I have the company-supplied oxygen bottle wrench that's on the unit's key ring.
Now I will admit that I tend to carry more stuff in my pockets than a lot of people do. But even if you ignore the first three wrenches I mentioned, what about the last one? If you work or volunteer for an agency or company that still uses oxygen bottle that need a wrench to open (rather than the newer ones with toggles that can be turned by hand), then you should be supplied with the appropriate tool. You NEED that tool to change oxygen bottles, and they should not be sending you out there without the tools to do your job. And more importantly, you should not be letting them do that.
That being said, another oxygen bottle wrench wouldn't be unwelcome. I've looked at the standard Skeletool, though, and honestly I just don't see where one can be incorporated into the design as it is now. There's just no viable place. I believe a substantial design modification would be necessary. But I know that for some of you, that's exactly what you want.
-
If you look at this as just a MT which happens to also function as a emergency tool in case of an emergency (perhaps for off duty rescue personnel) then it is a great tool and not to bad looking. I think that if they were to carry this tool with them at work it has the possibility to fail though :-\ The stress of just turning a screw with the bit driver when the Skeletool first came out was enough to cause at least some of them to fail as did the Wave (Leatherman may have fixed this problem because I have not heard of it happening in a good long while). That being said I hope they sell the bit separately because that would add a great function for someone to have just in case of an emergency

-
With the countless holes the Skeletool has one of them should have been possible to reshape into an oxygen wrench but I'd say a worse problem is that the glass breaker requires you to fold the tool out, taking time and limiting the grip you can have on the tool.
-
@Fortytwo said:
With the countless holes the Skeletool has one of them should have been possible to reshape into an oxygen wrench but I'd say a worse problem is that the glass breaker requires you to fold the tool out, taking time and limiting the grip you can have on the tool.It's not just finding a place for the whole; there also needs to be enough support around the area for the tool to not deform. For example, you can fit the frame opposite the carabiner opening over an oxygen bottle valve, but turning it results in substantial flexing of the frame. The Skeletool was meant to be light more than robust.
In truth, it may not have been the best platform from which to create a rescue variant, for that very reason.
The concealed glass breaker is both a blessing and a curse. The blessing is that it's not out in the open to poke you, or wear through a sheath. The curse is, of course, that it takes a moment to deploy it. But how much of an issue is that really? Yes, moments matter in an emergency. But maybe you can take it out a moment earlier, start getting it ready sooner.
-
With the countless holes the Skeletool has one of them should have been possible to reshape into an oxygen wrench but I'd say a worse problem is that the glass breaker requires you to fold the tool out, taking time and limiting the grip you can have on the tool.
It's not just finding a place for the whole; there also needs to be enough support around the area for the tool to not deform. For example, you can fit the frame opposite the carabiner opening over an oxygen bottle valve, but turning it results in substantial flexing of the frame. The Skeletool was meant to be light more than robust.
In truth, it may not have been the best platform from which to create a rescue variant, for that very reason.
The concealed glass breaker is both a blessing and a curse. The blessing is that it's not out in the open to poke you, or wear through a sheath. The curse is, of course, that it takes a moment to deploy it. But how much of an issue is that really? Yes, moments matter in an emergency. But maybe you can take it out a moment earlier, start getting it ready sooner.
I want to buy the Skeletool Rx bits (drivers and glass breaker)
Is It already possible.???
Thanks
-
@alexTOOL said:
I want to buy the Skeletool Rx bits (drivers and glass braker)Is It already possible.???
IIRC Leatherman refuse to sell the glass breaker bit separately. I think it was something to do with the bit holder on some LM MTs not being designed for the possible impact when used as a glass breaker. I'm pretty sure it was mentioned somewhere here on MTo.
-
Kinda surprised no one has made a glass breaker bit yet

-
-
@Aloha007 said:
Kinda surprised no one has made a glass breaker bit yet
I am no expert or anything on rescue tools or breaking glass, so feel free to correct me.
But I can imagine, the "time consuming" process of swapping bits in an emergency situation would render a glass breaker kind of redundant, and I can also imagine that the bit driver wouldn't be designed to be used as a hammer tool, so it would prematurely wear the bit driver out, if not destroy it completely.
Just my 2 cents....
-
Kinda surprised no one has made a glass breaker bit yet

I guess its because many/most/all have a dedicated tool like the RESQME in their car, so people don't feel the need to have a glass breaker.
I keep a automatic center punch in my vehicle. Just figured someone who really wanted one would have attempted to make one.

-
@MMR said:
I am no expert or anything on rescue tools or breaking glass, so feel free to correct me.But I can imagine, the "time consuming" process of swapping bits in an emergency situation would render a glass breaker kind of redundant, and I can also imagine that the bit driver wouldn't be designed to be used as a hammer tool, so it would prematurely wear the bit driver out, if not destroy it completely.
Just my 2 cents....
Unless you keep the glassbreaker bit equipped when not using other bits, it's just a bad idea and won't be ready when you need it. -
Kinda surprised no one has made a glass breaker bit yet

I am no expert or anything on rescue tools or breaking glass, so feel free to correct me.
But I can imagine, the "time consuming" process of swapping bits in an emergency situation would render a glass breaker kind of redundant, and I can also imagine that the bit driver wouldn't be designed to be used as a hammer tool, so it would prematurely wear the bit driver out, if not destroy it completely.
Just my 2 cents....
Not an expert on car rescue either, but I did several lab-safety courses (fire, spills, many dangers in a lab), I also did work with firefighters (developing protocols for high risk buildings == Labs). First step is always to calm down and think, so time is rarely that critical (e.g. on a crash site, you would first secure the site before you actually start rescuing people). However, there is a great risk in dropping that tiny bit (remember you are probably close to panic and your hands are shaking), making a glass breaker bit too unreliable.
-
And from 2018 all new vehicles in the US must have laminated glass in all windows, including the doors, so the utility of a glass breaker will be becoming increasingly questionable. https://www.firerecruit.com/articles/1505250-6-tools-for-breaching-auto-glass
-
@Steinar said:
And from 2018 all new vehicles in the US must have laminated glass in all windows, including the doors, so the utility of a glass breaker will be becoming increasingly questionable. https://www.firerecruit.com/articles/1505250-6-tools-for-breaching-auto-glass
Fire-extrication blanket to cover and protect the patient during operations.
Hood release tool.
Battery cable cutter.
Hack saw and spare blades.
Heavy-duty spring window punch.
Seatbelt cutter.
ART glass removal tool.
9.5-inch grip-lock pliers.
8-inch adjustable wrench.
12-inch pry bar.
Utility knife with spare blades.
Magnetic holder to place the kit on the vehicle.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login