Another hack for the Leatherman knurled screws.
-
Updated report on using keys: I tried them on three Micras that had never been taken apart. Got five screws open, but stripped one key on the sixth which was particularly non-cooperative. As I stated in the original post, it's a field expedient for someone who has no other option and needs to get one apart and together one time. I believe if handled carefully, a pair of keys will work, but should not be considered as long term service tools.
Goldmeister
-
Multimat,
I just posted the results on the keys; good for one Micra, one time. The key deal is pretty simple. Just find an old one with a round hole in it. I happened to luck out and find a couple with approx. 5.0mm. holes and hammered them on to the knurled screw. For a larger screw, if you can't find an appropriate key, you may have to take a rat tail file to the hole to open it up a bit. Will get a picture of it up.
I'm working on experimenting with various items found in the average household or available for cheap in the local hardware store. No way wood will work and I think a low quality socket would work pretty well. Those stainless screws are harder than the hinges of hell and if you don't use the same ones over and over, I think you could imprint mild steel very effectively without trashing them.
My next experiment may be a piece of hacksaw blade which would have to be normalized first as they're hardened. Average person should be able to do it over a kitchen stove.
I'm also thinking of some way to use a hex nut of the appropriate size. You'd have to grind one end of it down to get past the counter sink and into the threads and then just hammer it on to the knurled screw, imprint it and then grind the tips off so it becomes a tube, more or less. Get the appropriate sized hex head bolt, put some red Loc-tite or epoxy on it and thread it into the other end of the nut . Then you could get a wrench on the head of the bolt. Obviously, you'd need two of them.
Just thinking out loud here so don't take either of these as fact. I feel the same way you do about the amount of time these knurled screws took to figure out without the factory tools. I've always maintained that EVERYTHING comes apart without destroying it given enough well directed thought. I remember spending several days trying to get the sprocket off the rear wheel of a three speed bike and finally discovering it was a left hand thread. That was about thirty years ago and I've never forgotten how stupid I felt and how important thought is before using brute force.
Goldmeister
-
Thanks buddy , it would be good if you post pics of your Key tool

-
All good ideas so far Goldmeister!
Sounds like you are focusing on the Micra so far. It uses the smallest of the Leatherman knurled screws. You're new here, maybe you were not aware that on the medium-size knurled screw, a pair of Kick pocket clips makes the ideal set of wrenchs. :)
(I wish they sold a pocket clip for the Micra!) ;)
-
Welcome to the forum mate :)
-
Multimat,
Here ya go. Pictures aren't great, but you get the idea.
J-Sews,
Yep, I'm aware of the Kick pocket clips for the larger sizes. May even have seen them here. Found them for under $1.50/each and got two in my shopping cart. When I checked out, I found they wanted something like $12 for shipping. I registered my displeasure by canceling the order.
Goldmeister


-
Mickey d,
Thanks for the welcome. Judging by your number of posts, it looks like you've been around since the very beginning. Having been called Mate by two different members in a space of a few hours, would it be safe to assume there's a contingent from OZ and/or the UK? Always good company and a match for "Yankee Ingenuity" any day!
Goldmeister
-
@Goldmeister said:
Mickey d,Thanks for the welcome. Judging by your number of posts, it looks like you've been around since the very beginning. Having been called Mate by two different members in a space of a few hours, would it be safe to assume there's a contingent from OZ and/or the UK? Always good company and a match for "Yankee Ingenuity" any day!
Goldmeister
A large portion of this forum's members are from the UK.
And others, like me, aren't, but have picked up some of their habits...
-
@One Lame Frog said:
Mickey d,
Thanks for the welcome. Judging by your number of posts, it looks like you've been around since the very beginning. Having been called Mate by two different members in a space of a few hours, would it be safe to assume there's a contingent from OZ and/or the UK? Always good company and a match for "Yankee Ingenuity" any day!
Goldmeister
A large portion of this forum's members are from the UK.
And others, like me, aren't, but have picked up some of their habits...
There does seem to be quite a few of us now.
Great suggestions Goldmeister, and again, welcome to the forum. :)
-
@One Lame Frog said:
Mickey d,
Thanks for the welcome. Judging by your number of posts, it looks like you've been around since the very beginning. Having been called Mate by two different members in a space of a few hours, would it be safe to assume there's a contingent from OZ and/or the UK? Always good company and a match for "Yankee Ingenuity" any day!
Goldmeister
A large portion of this forum's members are from the UK.
And others, like me, aren't, but have picked up some of their habits...
Yeah, one of their habits is the way they take a thread off-topic. They do this constantly. I'm proud to say that I never do that. :)
-
Been working on this since the last post and finally have the $.90 tool for knurled screws on Leatherman Micra, PST and anything else that uses knurled screws of the appropriate sizes. I was lurking around the fastener section of my local hardware store hoping for divine inspiration and I got it: 3/16" coupling nuts. First I normalized it (made the steel as soft as possible), drilled a 5mm. hole in one end about 3/32" deep and then turned it around and drilled a 1/4" hole on the other end to the same depth. Smacked the 5mm. end down on a Micra knurled screw, turned it over and smacked the 1/4" end down on a PST knurled screw. Filed the ends true and tested it out. Combined it with one of the previously posted flat iron type wrenches and it worked great. You can grab the coupling nut with a 5/16" socket, open end wrench or whatever. Got so much torque that when I was tightening the screws on a Micra, I sheared one of the scissor end screws. If anyone has a spare, I'd be happy to tender coin of the appropriate realm for said screw and postage.
Goldmeister

-
I don't have a LM anymore so I can't try this myself. Anyone try using a piece of thick-walled rubber tubing over the knurled heads to both protect the heads and give a little more grab?
-
Good work on the tool GM, but my condolences on the broken screw. :( I'm suspecting there might only be one member here who has a bunch of spare leatherman screws lying around.... ::)
-
:D
-
-
:D
-
Good work on the tool GM, but my condolences on the broken screw. :( I'm suspecting there might only be one member here who has a bunch of spare leatherman screws lying around.... ::)
Hint: he sometimes posts replies using only a big grin smiley face. ;)
Uh, but beware of imposters. :-\
-
Good work on the tool GM, but my condolences on the broken screw. :( I'm suspecting there might only be one member here who has a bunch of spare leatherman screws lying around.... ::)
Hint: he sometimes posts replies using only a big grin smiley face. ;)
Uh, but beware of imposters. :-\
I sir, am no imposter! You stated yourself that he only sometimes does it. Someone else has got to do it if he isn't! Sheesh!
:D
-
It's true.
In my country, the fool has to sit on the King's throne every morning to warm the seat...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login