What did you use your Leatherman for today?
-
Used my Freestyle CX to cut some tbone steak a coworker gave to me...mmmm!
-
I used my OG Supertool to fix a door at work that was stuck. It's a crash bar style exterior door, and while locking up tonight I noticed that I couldn't turn the key to release the crash bar. I used the phillips on my ST to open up the bar and see what was wrong. Nothing out of sorts, but the hook that the key moves in and out of the lock loop on the bar was stuck fast. I pulled out the medium flat head on the ST, and pried hard against the hook. It popped free after some effort. I don't think a smaller Leatherman would have worked, I was sure I was going to break the one I was using after trying a few times, but it worked out all right.
-
When opening the packaging containing a 2x25 round 10/22 magazine from Brownells, I noticed my new LM Wave is less magnetic than the PSTII I used to carry. The steel staples just dropped off the pliers. What an improvement, Leatherman

-
It's been a while since I have posted on here but I have been enjoying reading through the forum recently.
Here is what I used my Super Tool for today;
Philips to disassemble and reasemble old secateurs

File to sharpen the blade

Pliers to turn the pivot nut

Finally back together

Sent from my GT-I9300 using Tapatalk
-
Micra scissor's trimmed 3m red tape to fix a window vent shield on wife's car.
Sent from my iPhone using Tapatalk
-
@colinoutdoors said:
It's been a while since I have posted on here but I have been enjoying reading through the forum recently.Here is what I used my Super Tool for today;
Sent from my GT-I9300 using Tapatalk
Leathermans pair nicely with secateurs!



as for the thread...
I cut some wire with my ST300 today

-
Though not the biggest fan of lm bit adapter but did what needed again.

-
I used the file in my Wave to dress up the threads on a piece of all-thread I had cut with a hacksaw.
-
Used supertool saw and pe blade to cut a couple of hazel sticks so my lad and me could smash some nettles down on the local foot paths
-
During a trip to Umbria. Always on my side.

-
Hung a curtain rod and the curtains with my Rebar. Could have used my little 12v, but I didn't...

-
Surge out to play to help dismantle (and put back together) the cistern on my loo, and to make (and fit) a new siphon washer (see pic for those who don't know what one is). Flush heaven again

-
More maintenance at the garden...



-
Used the original leatherman wave to use the metal saw. I did this original project like loooong ago but, I wanted to do some mods.. What you see are your typical bic pens three normal and one clicker, but what did I do? I took knitting needles and cut them to diff sizes, think of it, a typical bic but rather then plastic but in aluminum.. Not to much work, just cut to size, then sand the plastic ends to fit, not much..
JR

-
Used my Wave to cut open some bread for my chicken patties ....

Sent from my Nexus 6 using Tapatalk
-
Supertool helping to turn water off and change bathroom taps

-
The Supertool 200's serrated blade is cutting up lots of cardboard boxes left from the move.
Sent from my SM-G920R4 using Tapatalk
-

Sent from my SM-G920R4 using Tapatalk
-
Used my sideclip pliers to cut some curtain rings off at a friends house
-
Used the small mini-flathead screwbit to replace the watchband & Casio adapters on the new Casio 3 Sensor watch. Didn't want to wait till I got home cause the new band is MUCH wider. :D
Surprisingly the mini-screwdriver did GREAT! The watch pint tool that Lowtech send me went on walkabout. I must of put it someplace I wouldn't lose it, but I swore had used it a while back for the other watch. /shrug
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login