What Did You Use Your Multitool For Today?
-
I used my ST's file to deburr a new key that I had made for work. The blanks we have are too long and have to be trimmed down so they leave a nasty burr that will gum up the lock if you try to let it wear off. That's one thing about the Rebar I don't like, the file is too sharp for those applications and hangs on the burr rather than removing it, while the PST/Supertool/pulse files are perfect for that. Now that I think of it most of the files I've used on a lot of LM's are really good, the rebar is the only one that is too sharp.
-
I used my lm wave in combo with Topeak mini 9 to fix my punctured tire on my bike for the third time in a short period.

-
Used my supertool to remove a thorn from my sons bike tire

-
I used the Supertool's pliers to tighten a loose nut on one of the legs on our bench.

Sent from my SM-G920R4 using Tapatalk
-
Used my supertool to cut loads of fencing wire that was weaved into a hedge that we were removing.
-
Cutting wire, opening the broken coffee machine





-
Garden fence maintenance



-
Saved my ass today in a nonworking public bathroom

Tourists were going in and out all the time, and the lock was broken.
More than one got caught with his pants down during the morning.

When I had to go in, I just locked the door the Multitool way!


-
Filing down a rough edge on my daughter's dental retainer - this has to be the weirdest use I've put one to so far

-
Cut open a case of water with my Vic Soldier last night..
-
Used the Spirit's butter blade to open up the package containing...


yup, another Spirit :D




-
@ThePeacent said:
Used the Spirit's butter blade to open up the package containing...yup, another Spirit :D
Does that make the first Spirit a meta-Multi-Tool ?
-
@Mercury said:
I used my ST's file to deburr a new key that I had made for work. The blanks we have are too long and have to be trimmed down so they leave a nasty burr that will gum up the lock if you try to let it wear off. That's one thing about the Rebar I don't like, the file is too sharp for those applications and hangs on the burr rather than removing it, while the PST/Supertool/pulse files are perfect for that. Now that I think of it most of the files I've used on a lot of LM's are really good, the rebar is the only one that is too sharp.I do sometimes wish my Rebar had a diamond file. It's not a "budget" model like the Wingman, so why hold back?
-
Today we used three tools to dissassemble (/break) an Epson printer
Gerber mp400: supports the great torque needed to unscrew stuck screws, but Phillips (and other tools) are too small to reach some locations :-
Leatherman Micra : can reach some deeper screws and didn't suffer from the torque even with the 2D Phillips
Vic Huntsman : used the small flat driver and saw (to reduce plastic waste size)
-
...plant maintenance at mom's place today.






-
And painting rojects at Momma's this week


Spirit performed as expected!


-
Used my Spirit to adjust the front derailleur on my bike, which had just recently starting rubbing the chainring for some reason. I noticed in the process that my large chainring is slightly warped, but it's not bad enough to affect anything. I recently started riding this bike, which is about 15 years old, a Huffy that I bought from Target when I was in high school. It's probably been 10 years since I rode it last. While a little rough around the edges, it still rides OK.
-
One of my alpacas got his head stuck in the fence so I had to cut the wire with my wave. He was fine and didn't lose hardly any hair. I guess I'll be replacing the woven wire with some horse fence sometime soon.
-
To pose in a tree for a piccy for the juice cover GAW

-
So at the fort we need a new sponge covering for the sponge we use for firing (the sponge is a sheep skin covered stick that you use to send down the barrel of the gun before and after firing to extinguish any embers before loading). When we took the old cover off we found out that some used steel nail not the brass tacks you are supposed to use (steel can cause sparks which is the opposite of what the sponge is suppose to do
). So I took on the project of trying to remove the nails that put up a fight coming out.So yesterday I tried many things such as heating up a spike to burn the the nails out, but I really thought a 93mm inline awl was the right tool for the job. Normally this would not be a problem as I carry my Pioneer X so I run over to the locker room and find that the day before I had forgotten the X in my waterproof box after kayaking. So today I made sure to bring her out and with the awl and a cold chisel I was able to shorten the nails and then embed in the wood where they can't create sparks.
So the Swiss Army has saved the Union Army :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login