What Did You Use Your Multitool For Today?
-
This morning I cut some tough fibrous Agave leaves with my Salt, my MAXAM fixed blade and the replaceable saws from the Legend.


They worked great.

But the saw was too short, and fragile, reason why I switched over to the fixed blade

-
-
I had to tighten up a door jamb on a double door at work today. The screws are constantly backing out on this door for some reason, causing it to stick and not shut properly.
-
I used the Signal's blade for various cutting tasks while working at the house tonight. Also used the phillips driver for attaching a TV to its stand.

Sent from my SM-G920R4 using Tapatalk
-
I used my ST's file to deburr a new key that I had made for work. The blanks we have are too long and have to be trimmed down so they leave a nasty burr that will gum up the lock if you try to let it wear off. That's one thing about the Rebar I don't like, the file is too sharp for those applications and hangs on the burr rather than removing it, while the PST/Supertool/pulse files are perfect for that. Now that I think of it most of the files I've used on a lot of LM's are really good, the rebar is the only one that is too sharp.
-
I used my lm wave in combo with Topeak mini 9 to fix my punctured tire on my bike for the third time in a short period.

-
Used my supertool to remove a thorn from my sons bike tire

-
I used the Supertool's pliers to tighten a loose nut on one of the legs on our bench.

Sent from my SM-G920R4 using Tapatalk
-
Used my supertool to cut loads of fencing wire that was weaved into a hedge that we were removing.
-
Cutting wire, opening the broken coffee machine





-
Garden fence maintenance



-
Saved my ass today in a nonworking public bathroom

Tourists were going in and out all the time, and the lock was broken.
More than one got caught with his pants down during the morning.

When I had to go in, I just locked the door the Multitool way!


-
Filing down a rough edge on my daughter's dental retainer - this has to be the weirdest use I've put one to so far

-
Cut open a case of water with my Vic Soldier last night..
-
Used the Spirit's butter blade to open up the package containing...


yup, another Spirit :D




-
@ThePeacent said:
Used the Spirit's butter blade to open up the package containing...yup, another Spirit :D
Does that make the first Spirit a meta-Multi-Tool ?
-
@Mercury said:
I used my ST's file to deburr a new key that I had made for work. The blanks we have are too long and have to be trimmed down so they leave a nasty burr that will gum up the lock if you try to let it wear off. That's one thing about the Rebar I don't like, the file is too sharp for those applications and hangs on the burr rather than removing it, while the PST/Supertool/pulse files are perfect for that. Now that I think of it most of the files I've used on a lot of LM's are really good, the rebar is the only one that is too sharp.I do sometimes wish my Rebar had a diamond file. It's not a "budget" model like the Wingman, so why hold back?
-
Today we used three tools to dissassemble (/break) an Epson printer
Gerber mp400: supports the great torque needed to unscrew stuck screws, but Phillips (and other tools) are too small to reach some locations :-
Leatherman Micra : can reach some deeper screws and didn't suffer from the torque even with the 2D Phillips
Vic Huntsman : used the small flat driver and saw (to reduce plastic waste size)
-
...plant maintenance at mom's place today.






-
And painting rojects at Momma's this week


Spirit performed as expected!


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

